I have a bit of a wierd thing here, its a 7" radial fan, maybe by comair rotron, but look No mounting holes!
Any ideas anyone?
I have a bit of a wierd thing here, its a 7" radial fan, maybe by comair rotron, but look No mounting holes!
Any ideas anyone?
If you have a cooling question or concern feel free to contact me.
Depending on what you are using it for you could make 4 small brackets to hold it in place.
You could take some 3/4" x 1/16" steel strapping and wrap the circle down to a v-shaped pair of legs with a bolt through the legs where they meet and then bend 90 degree feet and drill holes for bolting the feet down.
XSWCG Disclaimer:
We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.
Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".
I think I get it but can you sketch a diagram?You could take some 3/4" x 1/16" steel strapping and wrap the circle down to a v-shaped pair of legs with a bolt through the legs where they meet and then bend 90 degree feet and drill holes for bolting the feet down.
If you have a cooling question or concern feel free to contact me.
Don't have any ideas about the mounting holes, but I'd suggest you keep your fingers out of the blades...OUCH,
955 @ 5362 MHz on DD RBX @ 1.58v
P5WD2-E Vcore mod, Vdim mod.
8000ul @ 4,3,3,8 1170MHz @ 2.7v
ATI 1900xtx, modded DDx18 / Modded EXOS II w/ Alphacool 1510
Zippy 6850P
Proth your PM box is full on OCF, and yeah I'm going to make a fan grill for it I think...
If you have a cooling question or concern feel free to contact me.
Please don't laugh toooooooo loud, I did this freehand in Paint.Originally Posted by n00b 0f l337
Last edited by SiGfever; 06-24-2006 at 08:58 PM.
XSWCG Disclaimer:
We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.
Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".
hehe im sorry but i have to laugh what is that a picture of? a stick man lifting a dumbell?
J/K
Lee
Looks like some kind of explosion.
...is no longer working as an assistant HVAC/R-installer...
But, is still blasting 20000 songs of real Rap
Hmm where can I get the mounting aparatus like that?
If you have a cooling question or concern feel free to contact me.
Use some screws to hold the fan by the rim?
Originally Posted by A HVAC friend of mine
I would try to find a big C-clip, then drill holes after getting it around those two flanges.
Drill a hole, file a hole, hump a hole, etc.
Use big washers.
Use shroud with mounting clips.
Guys, Guys its so simple buy another fan with mounting holes! There problem solved!!
My Rig:
Q6600 2.4Ghz@2.9Ghz Custom Liquid Cooling
ATI X1950XTX 512mb DDR4
MSI 975X Platinum PowerUp Edition
2gb Kingston Hyper-X DDR2 667
Sound Blaster Audigy2
2 IDE HDD, 2 SATA HDD
LG DL16XDVD Writer,52X CDROM
OCZ 520Watt PSU 33Amp +12v
Thermaltake Xaser III case
Logitech Z560 4.1 400watt Surround Sound
3Dmark03-21112
3Dmark05-12154
3Dmark06-8054
Bookmarks