slow?
slow?
Always wanted an EE chip!!!
I say start clocking it. if you got poor ram i got 512MB here of pure happy Intel desing/made stuff for the Asus P4c mobo
just got 2x512UTT making Dual channel with 2-3-2-4Originally Posted by Pete
with the Gigabyte 8IK1100
FIC R9500@9700@325/276
A Cheetah 10k 18G U160 and a Barracuda 7 160G SATA
also a LSI U160 controller
Just killed one of those Gallatins a couple of days ago ... be very careful OCing it ...
they don't go too far, anyway. 3.8-3.9 or so on air.
~40 secs is normal for P4 @ 3.2GHzOriginally Posted by BlackBird@HKEPC
Prescott oc's much further then Gallatin (EE)
3.8-4GHz should be possible with good air or water. I could go to about 4.4GHz with phase....
Your SPI time is right for stock...you should be able to get down to about 28 sec (if i rememeber correctly) OC'ed above 4GHz.
-FCG
I will OC it after getting a new PSOriginally Posted by TaPaKaH
just using a Delta 350 with those monster
I had just tried with 8S655TX-Ultra with 3.58GHz few months agoOriginally Posted by freecableguy
but 655TX slower than 875 in SPI1M abt 1s
anyway, the 655TX just cost me abt$32
and can set 2-2-2-4 max
Before i was using a Celeron D 320Originally Posted by SMa
~40s bad :\
Sorry for my bad English.
Rig I:
| I7-2600K | Intel DZ68DB | Mushkin BlackLine 4Gbx2 1333 | Intel SSD 320 | Seasonic M12 520w |
Rig II:
| E2160 (stock) @ 3Ghz | IP35-E | Gskill F2-6400CL4D-2GBHK | Gecube HD2600xt + Accelero S1R2| WD 250 AAKS | Hec Silent Pro 385w |
Bookmarks