No, problem.
I'm going to implement a driver name change so no conflicts arise in the next version.
No, problem.
I'm going to implement a driver name change so no conflicts arise in the next version.
Last edited by The Coolest; 07-09-2006 at 01:50 AM.
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Quote:Originally Posted by billdavis
could you review this dump.txt to see if everything appears to be ok
Looks just fine.
thanks, when i ran it for the first time my computer shut down. but... it was at 3am and i forgot to set back 1 of the 500 settings i changed that night
NEW Question,
@2900mhz with my ihs removed and Ceramique
mbm5 was reporting:
idle40 load51
core temp beta
idle31 load51
@3000mhz ihs removed & Coollaboratory Liquid metal
mbm5 was reporting
idle37 load46
coretemp beta
idle31 load42
also my water temp after cpu,chipset,2x7800gt is about 31c
so would the idle of 31c be about right or the 37c?
it is hard to beleive i got a 10c improvement from this tim but im now still priming @3000mhz both cores are with in 1c of each other
________
212 EXPORT
Last edited by billdavis; 03-08-2011 at 07:11 PM.
in x64 Edition with 8M Super Pi running to load CPU
comparing CoreTemp, NextSensor, MBM5, and Everest 3.00
Is this supposed to be working on my Rev E CPU?
I have a 3800+ 0601 BH-E4 CPU and it appears to be working correctly for me.
It works on all A64 CPUs.
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
The Coolest, you might consider editing the thread title to avoid confusion.
This way it suggests CoreTemp is for Rev F owners exclusively.
[SIGPIC][/SIGPIC]
lolOriginally Posted by Nedjo
nice work dude. Will try this 2nite
DFI SLI-DR Expert (12/5/06)
AMD Opteron 170 (CCB1E 0550 VPMW)
2 x 1GB Team Xtreem PC4000 Samsung UCCC
Enermax Liberty 620W
Sparkle 6800GT 420/1050
Storm G4 Waterblock, MCW55, MCP655 Pump, Dangerden Asus AN8 Chipset Block
Radiical Radiator
LG Burner
2x Seagate 200GB SATAII HD @ RAID 0
CM Stacker
any chance for prescott support?
Update:
Version 0.9.0.91 - 5th July, 2006
- Logging feature added - Just copy into Excel for easy graphing.
- Fixed a bug where some programs would cause the program's driver to fail.
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
i get an error
after clicking ok, the icon is visible in the system tray, but the window never appears and eats 50% of my cpu resources
i950 (3035B684)
Gigabyte EX58A-UD3R
3x4GB G.Skill PC3-12800 7-8-7-24
HIS Radeon HD 6970 2GB & Dell 3007WFP-HC
Asus Xonar DX
128GB C300, Velociraptor & Sammy F3's
Corsair AX850W
Windows 7 Ultimate x64 SP1
I get an error also. Previous version worked fine.
Im getting the exact same error
The difference between genius and stupidity is that genius has limits.
- Albert Einstein
same
________
SEX TUBE
Last edited by billdavis; 03-08-2011 at 07:12 PM.
same here 3
Intel Core 2 Duo E6600 @ 3200MHz
CoolerMaster GiminII Cooler + AC RYAN 12CM Fan
2 x 1GB Kingston ValueRAM DDR2-667 @ DDR800, 44412, 2.0v, Black slots. (Hynix FP-Y5 RAMchips)
ASUS P5N-E SLI (BIOS 1201) 1.56v chipset
ATI Radeon X1950GT 512MB (PCI-E)
TDK 52X48X52X16X Combo Drive
2 x WD 36GB Raptor SATA 8MB in RAID 0 Mode
SEAGATE 320GB SATA2 16MB
MAXTOR 200GB SATA2 8MB
Samsung Floppy Drive
Audiotrak Prodigy 7.1LT Sound Card
Lian Li PC65B+ Casing
Corsair TX Series 750W PSU
Window XP Pro SP3
got the error as well
Intel Core i5 2500k @ 4.7GHz
Gigabyte Z68X-UD3H-B3
8GB Corsair DDR3-1600
MSI GTX 680
XFX 750W Black Edition
Corsair Carbide Air 540
Everybody will get the error, its a bad compile. TC neglected to test his release build (although he doesn't even have an A64). He has gone to sleep or work so it'll be a bit before its fixed. Hang in there.
Opteron 165 (2700mhz) - Storm - DFI Ultra-D - Connect3D X1800GTO - Revo 5.1
2 x 1gb G-Skill (2xxmhz, 1T 2.5-3-3-6) - Fortron AX500-A - Antec 3700 BQE
( Heatware )
lol whoops...
damn, i catch on to this only when a bugged version gets released, lol.
Hmmm, I'm sorry. I guess compiling and 4am don't mix to well.
I think it should work now, try it out.
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
works now thanks
temps look about right, I knew my temps reported in smartguardian were off...I just couldn't believe i was at 44C full load at 1.6v and using the stock cooler.
Intel Core i5 2500k @ 4.7GHz
Gigabyte Z68X-UD3H-B3
8GB Corsair DDR3-1600
MSI GTX 680
XFX 750W Black Edition
Corsair Carbide Air 540
One observation of mine: CoreTemp doesn't seems to refresh the CPU frequency reading, but does VID. IMHO this makes logging CPU freq pretty useless b/c the same freq is being reported all the time. It just writes down freq CoreTemp detected when it was started.
Last edited by high5; 07-11-2006 at 03:38 AM.
[SIGPIC][/SIGPIC]
Oh damn, you're right. lol. I guess I'm not paying attention :|
Either way can you let it run for a while and see if it crashes after some time?
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Ran it for half an hour - no problems.
[SIGPIC][/SIGPIC]
Works now, only thing is it reports the stock vid not the oc vid, but gives me the oc frequency and not the stock one.
Theres a good 7-10c difference between core1 and 2. Guess i might have a bad mount with the water block.
The difference between genius and stupidity is that genius has limits.
- Albert Einstein
Posting Permissions
Reply With Quote
Bookmarks