this program is a bit scarey when you run orthos prime at 320 x 11 (3.52 GHz) @ 1.45v and it climbs above 70c
this is pretty much expected from core readings, correct?
this program is a bit scarey when you run orthos prime at 320 x 11 (3.52 GHz) @ 1.45v and it climbs above 70c
this is pretty much expected from core readings, correct?
RIG 1: X6800 | DFI Infinity 975X/G | 2x1GB OCZ PC2-8000 Plat EL XTC |
X1900 XTX Crossfire | FSP 700W Epsilon |
Intel TAT gives me 17C more @ idel and 10C more @ load compared to Core Temp speed fan and Gigabyte Easy Tune I have a E4300 BTW
Intel I7 2600K @ 4800 MHZ | Corsair H80
Asus Maximus IV Gene-Z
16 GB Corsair Vengeance LP DDR3 1600
eVga GTX 480
Creative X-FI Titanium HD
Crucial M4 128GB SSD | Crucial M4 64GB SSD| 1 TB Samsung F3
Silverstone TJ08-E | Corsair AX850
HEAT: http://heatware.com/eval.php?id=20134
Got some funny readings with an E6600 and Gigabyte DS4...
CoreTemp 0.94:
#0: 20ºC
#1: 19ºC
Ambient according to a digital thermometer:
23ºC
Waterblock temp:
27ºC
You were not supposed to see this.
Is it somehow possible to output the coretemp readings to samurize?
2 favouriites together Tetedeiench developer of OCCT has bta =
OCCT with Coretremp Support
works well.
&
- i7 920
- DFI DK X58-T3eH6
- G.SKILL PI Black DDR3 PC 12800 CL8 6GB kit (F3-12800CL8T-6GBPI-B)
- Crossfire 2x ATI HD4670 GPU 785 Ram 1060
- Thermaltake Toughpower 1200w
- Cooling: Water - EK Supreme
- Lian Li V2000B+
24/7 OC 4Ghz 20x200 x8 1600Mhz 8-8-8-21
Official Gigabyte X48T-DQ6 Info Thread
DFI DK X58-T3eH6 on Test
Version 0.95 - 17th March, 2007
- Fix: Revision F Turion/Turion X2 detected wrong.
- Fix: Core Temp fully loads one core on a dual core AMD CPU.
- Fix: Core Temp crashes on Dual Core Opteron 200 series systems.
- Fix: Core Temp misdetected certain Dual Core Opteron CPUs.
- Fix: Must set Core Temp to run as Administrator in Vista.
- Fix: Can't see Core Temp GUI if Core Temp was last closed minimized.
- Fix: C2D L2 rev. report very low temperatures. (Tjmax to 100C)
- Fix: Core Temp reported wrong temps after a while. (Driver conflict)
- Fix: Core Temp reported Max VID on Intel CPUs. (Now shows current)
- Add: Show temperature in System tray.
- Add: Manual refresh option by pressing F5 or "File" Menu.
- Add: Show "Delta to Tjunction" temperature for Core 2 CPUs.
- Add: Support for latest Intel and AMD CPUs.
- Add: Minimize/Restore option in system tray icon right click.
- Add: Save last window position.
- Add: Prevent 2 instances of Core Temp from launching.
- Change: Rewritten Intel CPU recognition code.
- Change: Core 2 Duo codename change to Conroe-2M from Allendale.
- Change: Pop up bubble-window with temperatures removed.
- Change: Not Beta status anymore.
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Good stuff mate
Keep up the good work
Yes, same here. Both http://www.thecoolest.zerobrains.com/CoreTemp/ and http://www.alcpu.com/CoreTemp/ fail to open
Last edited by psy4fun; 08-12-2010 at 08:02 AM.
http://69.93.81.146/~thecoolest/CoreTemp/
I added the link in fine print at the bottom of first post too.
Last edited by The Coolest; 03-18-2007 at 02:35 AM.
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Whenever Intel fixes the DTS. This is not a software glitch AFAIK.
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Hi Arthur, I believe there exists some problem regarding name resolution and access to alcpu.com, but I'm not capable to identify where is it.
Name servers here in Hawai cannot resolve alcpu.com or www.alcpu.com to 69.93.81.146. And 69.93.81.146 is completely inaccessible too. Tracing route to 69.93.81.146 stop at po1.car03.dllstx6.theplanet.com, so no luck following this approach.
Name server for alcpu.com is ns1.psk-dns.com (69.93.81.146). Trying to use that to resolve alcpu.com failed. By the way, ns1.psk-dns.com looks inaccessible too.
Talking to a UK friend last night, he reported the same problem now although he was capable to download the 0.94 version weeks ago directly from your website.
I know this doesn't help too much, but I'm reporting what I've discovered so far to let you know.
Last edited by psy4fun; 08-12-2010 at 08:02 AM.
I get a BSOD with 0.95.
Never had any problems with previous versions.
Upcoming :
| C2D 6600 | Asus P5W64 | OPB Ed Rams | Sapphire X1950XTX | Seagate 7200.10 x 4 + Areca 1210 Raid Card |
| X-Mer / X-Fi Elite Pro + Gigaworks S750 | PCP&C 1KW | Alcadia XR1 Black Knight | G15 keyboard + G5 mouse |
| 2407WFP | Water Cooling : DDC+ Ultra x 2, PA120.3, Storm, EK1900, Micro-res, 7/16id tubing + S-flex fans |
Edited.
Last edited by rbsmontemor; 11-05-2010 at 07:01 AM.
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
If anyone is having problems with Core Temp crashing on them, please look at the appropriate thread and post there your problem and system spec. I think this way it will be very effective at getting to the bugs faster.
Intel Thread
AMD Thread
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
I just registered and posted over at your forums "The Coolest", thanks for a place to post our issues with the program! Since I consider your program "CoreTemp" a nessessity I just searched and found CoreTemp v0.94 so I can use it in the meantime until v0.95 is working on my rig without shutting everything down! If anyone needs a linky for CoreTemp 0.94 just ask!
Asus Maximus III Formula (2001)
Intel i7 860 (L924B516)
Noctua D14
Corsairs CMG4GX3M2A2000C2 (2 x 2GB) RAM
eVGA GTX480
DD-H20
BIX GTX360
MCP35X PWM
Creative X-Fi Titanium PCI-e
LG GGC-H20L Blu-Ray
Toughpower 850w Modular
GSkill Phoenix Pro SSD 120GB
HEAT
TheCoolest,
coretemp 0.95 now reads the correct temp on e4300/e4400s (and a different tjunction o0)
however, i have encountered a problem soon as i stop priming (this will happen every time i prime for a while with coretemp 0.95 open and then i stop)
FYI, I am 24 hours orthos stable at this clock
priming
stopped
Last edited by Slay0r; 03-26-2007 at 03:21 PM.
That's quite interesting. I will investigate, thanks.
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
I may have found a solution(!) to the BSOD problem in 0.95.
My test system stopped crashing. I need more computers with this problem to confirm the fix is working.
If you want to test the fix, please contact me via one of my IMs.
Thanks,
Arthur
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Version 0.95.4 - 22nd August, 2007
- Fix: Core Temp causes restarts/BSODs on start.
- Fix: Core Temp causes hard shutdowns on some AMD systems.
- Fix: System tray icons are black squares on less than 32bit desktops.
- Fix: Some other minor bugs fixed.
- Add: Support new Intel CPUs.
Member of Overclockers.com Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
AMD Ryzen 7 2700X / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
Secondary rigs:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Anyone please could do a zip file with Version 0.94 and this newest 0.95.4 and make an alternative link (rapidshare) to me? Trying downloading direct from the site since version 0.94 but no way my server here in Brazil recognizes the site adress, dont know why, probably a proxy issue? Wathever i try always get the "page cannot be bla bla bla...." So, please anyone could do that for me?
Last edited by GueD'S; 08-22-2007 at 03:41 AM.
E8600@4,0Ghz@undervolt + Zalman CNPS7000CuLed | Biostar TPower I45 | 4GB Corsair Dominator DDR2 1066 | ATI Radeon 4870x2 2GB 2x256Bits | Ultra X3 1000W real | DVDRW Samsung SH-S223F | Samsung Spinpoint SATAII 1TB 32MB Buffer | 2x250GB Seagate SATA II 16MB Buffer em RAID0 | ViewSonic VX2025wm 20,1'' Wide DVI | Logitech G5
Just out of interest, are you ever going to get driver signing so coretemp will run under Vista 64bit. The current workaround is just trash, would be nice to have it 100% supported and functional under 64bit vista thats for sure.
Bookmarks