x2 3800+ s939 Adventure.

[leca]

So whats on the menu for today?

WC Gear:

Swiftech MCP-655
Swiftech Storm G4
Black Ice Extreme III Rad / 3x Antec ajustable fans from my p180
Swiftech Micro Res

-----------------------------------

Hardware:

Opteron 148
x2 3800+ - LCBIE 0618EPMW
DFI LanParty UT NF4 SLI-DR eXpert
Nvidia 7800gtx
2x512 Corsair Value Select

-----------------------------------

Where the hell are my tracers?

I sold my balistix to JeB, they have just started to die (balistix syndrome) and i feel like **** because he only had them for a month.

-----------------------------------


Photo's:





-----------------------------------

x2 3800+ fun

Stock:


Now let the games begin :thumb:

-----------------------------------

3000Mhz


3100Mhz


-----------------------------------

Suicide Valid @ 1.520v:
http://valid.x86-secret.com/show_oc?id=97726 - 3201.37 MHz

-----------------------------------

Tomorrow I might do some 3dmark runs, but i'm really just waiting to get my hands on some decent ram

[wtkprol]

Nice clocks with some nice voltage.

[Absolute_0]

What's up with the temps? Also which voltage does 3.1 need to be stable?

Looks like a good one, LCB1E is coldbugged territory, basically a CCB1E 170 with less cache, even says Toledo instead of Manchester. Nice clocks.

*What divider are you running? Seems a might excessive, but i've done that too when i'm testing a CPU for max clocks

[leca]

What's up with the temps? Also which voltage does 3.1 need to be stable?

Nfi whats going on with the temps, could just the the expert playing up.

But yeah it is a bit weird, here are my temps with the opteron this morning before I put in the x2 - Idle Load

I didn't try pushing any more then 1.525v into it , but it was not stable. I can super pi 1m @ 3.1 np's...thats about it.

Looks like a good one, LCB1E is coldbugged territory, basically a CCB1E 170 with less cache, even says Toledo instead of Manchester. Nice clocks.

*What divider are you running? Seems a might excessive, but i've done that too when i'm testing a CPU for max clocks

Good eye @ the Toledo

Div 100, hahahaha yeah i'm just testing for max clocks so I dont care about the pi runs

[farksy]

LCB1E 0618 EPMW ?

Man those are some nice clocks with low voltages !!!

[Repoman]

Nice B1 chip! Yes it really is a Toledo with disabled cache, the 1st C means dual core 1MB cache per core

[Counter CS]

Nice B1 chip! Yes it really is a Toledo with disabled cache, the 1st C means dual core 1MB cache per core

Hi, i have the same x2 3800+ 0618 RPMW and in 1 day of testing i get 3100Mhz whitout to much stress, but my temp are to high, because here in Portugal Ambient temp are 31/35ºC

BTW what voltage did you use to get 3200Mhz ???

[thunderstruck!]

What's up with the temps?

Expert underreports temps by 8-10C.

[leca]

BTW what voltage did you use to get 3200Mhz ???

Sorry I forgot to mention that , 1.525v was used at the time of submiting it for validation.........and then it hard locked about 2mins later lol

[IvanAndreevich]

Sorry I forgot to mention that , 1.525v was used at the time of submiting it for validation.........and then it hard locked about 2mins later lol

Damn, that's good. You might be able to get it stable / benchable at 3.2 GHz with around 1.6V.

[leca]

Damn, that's good. You might be able to get it stable / benchable at 3.2 GHz with around 1.6V.

Yeah hopefully, I'm just unsure of max safe v's to use atm

[IvanAndreevich]

Well, I ran my X2 3800+ at 1.625V for 5 months on Big Typhoon, so I think 1.6V on good water is more than a safe bet as long as temps are OK.

[leca]

I'll give it a whirl later today. Thanks IvanAndreevich

[leca]

Just to let people know, there has been some confusion a few people seem to think this is a LCB1E 0618EPMW.

It is not a 1, it is a LCBIE 0618EPMW

[SoF]

that's a really good chip there - don't think my X2 will do cuz it
is one of the old '05 not a new one

[Counter CS]

Hey Leca what´s Tcase Max of your X2 3800+???

Look at the SreenShot!

[Zeus]

Very nice clocks but those temps can't be right.
What was your room temp?

[Counter CS]

Very nice clocks but those temps can't be right.
What was your room temp?

What temp are you talking about ???

[Zeus]

About Leca's CPU temps.

[Counter CS]

I have an DFI expert too and i can tell you that the temp is not right, it show -8/-10ºC.
In the last oficial BIOS there is an Option to correct the temp "adding +1 at +15ºC you must activ that option and use +8ºC to correct the temp showing on SG

[leca]

Very nice clocks but those temps can't be right.
What was your room temp?

Yeah the temps seem to be stuffed when using this cpu compaired to my opteron 148.

Room temp was around 17-19c

Hey Leca what´s Tcase Max of your X2 3800+???

When I get home from work i will upload and image of that for you.

[Counter CS]

Yeah the temps seem to be stuffed when using this cpu compaired to my opteron 148.

Room temp was around 17-19c



When I get home from work i will upload and image of that for you.

You already posted that here, sorry for ask.

[leca]

Nevermind then

[leca]

I managed to get my hands on another one of these exactly the same *drool*

The second one




--------------------

Super pi 1m - 3103.0MHz:


--------------------

Suicide Valid @ 1.520v:
http://valid.x86-secret.com/show_oc?id=98279 - 3307.37 MHz

--------------------

Seems like this cpu is a slighty stronger , but apart from that they are exactly the same.

Thanks everyone for your support

[Hystrix^]

Not bad at all, but you need better rams

Very nice clocks