OK, i got my pump in the mail yesterday . I'm workin today and tomorrow 8-5 so I won't have much time, but friday is lookin good. I actually feel that I can finish the actual chiller, no wiring, but I'm sure I can get it running.
OK, i got my pump in the mail yesterday . I'm workin today and tomorrow 8-5 so I won't have much time, but friday is lookin good. I actually feel that I can finish the actual chiller, no wiring, but I'm sure I can get it running.
new-old rig:
E8600
2x ASUS 4850
DFI X48 board
4 gb DDR2
650w FSP PSU
Working on some liquid cooling!
old-old rig:
Opteron 165 @ 2.610 (1.425v)
- Prime Stable, Stock HSF
DFI LanParty UT Expert
2gb G. Skill Dual Channel Ram 2.5-3-3-6
7900gt CO SuperClocked
2x WD250gb SATA in RAID 0
FSP Epsilon 600W
heatware: thenrz
haha, you guys are great.Originally Posted by thenrz
cant wait to see it working.
French Duron Poof
Every time you lap a swiftech block a kitten dies
"Extreme Systems, yes. But it could also mean Extremely creative, Extremely resourceful and on and on. Please don't use the name of this site as an excuse to do stupid things" -situman
HEAT
Well, it's saturday and I went out and bought more spray paint. It's a really nice gloss black that will look really good. I picked up some good wire for the box and leads, and I also got four red cathodes for the lighting inside the box and chiller . When I actually get some time to work on it, i'll update with pictures.
On another note, I've had a few requests for me to repost the first pictures. That's a little hard to do right now. I found my camera, which my parents had, but my good memory stick is MIA. My bet is they left it in seattle, but who knows.....
new-old rig:
E8600
2x ASUS 4850
DFI X48 board
4 gb DDR2
650w FSP PSU
Working on some liquid cooling!
old-old rig:
Opteron 165 @ 2.610 (1.425v)
- Prime Stable, Stock HSF
DFI LanParty UT Expert
2gb G. Skill Dual Channel Ram 2.5-3-3-6
7900gt CO SuperClocked
2x WD250gb SATA in RAID 0
FSP Epsilon 600W
heatware: thenrz
oh shizz niggetOriginally Posted by thenrz
French Duron Poof
Every time you lap a swiftech block a kitten dies
"Extreme Systems, yes. But it could also mean Extremely creative, Extremely resourceful and on and on. Please don't use the name of this site as an excuse to do stupid things" -situman
HEAT
OK, so a trip to lowe's brings me do a halt again. I guess I misunderstood you guys when you said denatured alcohol was cheap! To fill my system with 70 denat/30 water it's going to cost me close to 50 bucks. What are my other options?
new-old rig:
E8600
2x ASUS 4850
DFI X48 board
4 gb DDR2
650w FSP PSU
Working on some liquid cooling!
old-old rig:
Opteron 165 @ 2.610 (1.425v)
- Prime Stable, Stock HSF
DFI LanParty UT Expert
2gb G. Skill Dual Channel Ram 2.5-3-3-6
7900gt CO SuperClocked
2x WD250gb SATA in RAID 0
FSP Epsilon 600W
heatware: thenrz
I'd use a mix of dentured, ethelyne glycol and water
Bring back natural selection! No more warning lables!
The one and Only MG Pony
I'd use a mix of dentured, ethelyne glycol and water
That's exactly what I was thinking! Use the denatured to keep the glycol from slushing up, and both will do the same for the water. What would you recommend as a mixture ratio?
new-old rig:
E8600
2x ASUS 4850
DFI X48 board
4 gb DDR2
650w FSP PSU
Working on some liquid cooling!
old-old rig:
Opteron 165 @ 2.610 (1.425v)
- Prime Stable, Stock HSF
DFI LanParty UT Expert
2gb G. Skill Dual Channel Ram 2.5-3-3-6
7900gt CO SuperClocked
2x WD250gb SATA in RAID 0
FSP Epsilon 600W
heatware: thenrz
heavier on the dentured lighter on the glycole and even more so on the water tweak it from there.
Bring back natural selection! No more warning lables!
The one and Only MG Pony
How does 50/40/10 (denat/glycol/h2o) sound? I honestly don't know what kind of temperatures to except, but a guy I work with says the compressor is pretty powerful and the temps should be good.
new-old rig:
E8600
2x ASUS 4850
DFI X48 board
4 gb DDR2
650w FSP PSU
Working on some liquid cooling!
old-old rig:
Opteron 165 @ 2.610 (1.425v)
- Prime Stable, Stock HSF
DFI LanParty UT Expert
2gb G. Skill Dual Channel Ram 2.5-3-3-6
7900gt CO SuperClocked
2x WD250gb SATA in RAID 0
FSP Epsilon 600W
heatware: thenrz
I finally got time to work on the chiller. My buddy and I attached everything to the base, built a shelf for the pumps, installed the pumps, installed the tubing, and put on insulation. I then started on the wiring, and everything but the fans and the eheim are wired up. I should be able to get the wiring and the box done tomorrow. The pictures are cell phone specials, so sorry about the poor quality.
Last edited by thenrz; 08-25-2006 at 02:12 PM.
new-old rig:
E8600
2x ASUS 4850
DFI X48 board
4 gb DDR2
650w FSP PSU
Working on some liquid cooling!
old-old rig:
Opteron 165 @ 2.610 (1.425v)
- Prime Stable, Stock HSF
DFI LanParty UT Expert
2gb G. Skill Dual Channel Ram 2.5-3-3-6
7900gt CO SuperClocked
2x WD250gb SATA in RAID 0
FSP Epsilon 600W
heatware: thenrz
what do you guys think...
50/40/10 glycol/denatured/h2o?
new-old rig:
E8600
2x ASUS 4850
DFI X48 board
4 gb DDR2
650w FSP PSU
Working on some liquid cooling!
old-old rig:
Opteron 165 @ 2.610 (1.425v)
- Prime Stable, Stock HSF
DFI LanParty UT Expert
2gb G. Skill Dual Channel Ram 2.5-3-3-6
7900gt CO SuperClocked
2x WD250gb SATA in RAID 0
FSP Epsilon 600W
heatware: thenrz
That seems fine as a starting point, and tweak if needed.Originally Posted by thenrz
RussC
Bookmarks