Corsair 6400C3 at 1116MHz on AM2

[[XC] moddolicous]

What does OnePageBook has to do with OPPainter ?

Even more Oxx's - OPP, will you do some ORB action anytime soon?

Woops, didnt even realize that. OPP & OPB, 1 letter difference.
On topic, congrats on braking 12k and I would still like to see some rosetta benchies to see if bandwith has anything to do with it.

[OPPAINTER]

What does OnePageBook has to do with OPPainter ?

Even more Oxx's - OPP, will you do some ORB action anytime soon?

Already did. Problem is my 7900 cards have bad memory. I need new cards to get serious.

With this Same Corsair 6400C3 running at 808MHz 3-3-3-5 1T I scored:

#3 in 3D06
#5 in 3D05
#2 in 3D03

OPP

[M.Beier]

Already did. Problem is my 7900 cards have bad memory. I need new cards to get serious.

With this Same Corsair 6400C3 running at 808MHz 3-3-3-5 1T I scored:

#3 in 3D06
#5 in 3D05
#2 in 3D03

OPP

Dont you dare tell' me you havnt done a 01SE oldboy

01SE it the way we play mate, heh, at least the x850XT havnt got retired in that bench yet

[OPPAINTER]

Dont you dare tell' me you havnt done a 01SE oldboy

01SE it the way we play mate, heh, at least the x850XT havnt got retired in that bench yet

No I havn't done 01 as matter of fact. I think it I may score around 52k with single card.

OPP

[SoF]

wow ddr2 can finally show its true power in your hands

[OPPAINTER]

I threw my Corsair 8500C5 in along with my 6400C4 for 4 gigs of ram.

Hows this 4-way interleave action

OPP

[M.Beier]

Damn you Eric, if you dont stop soon, my keyboard will die due

Hehe, well, seems like its worth getting' another 2*1GB sticks... - Tetris requires 4GB's as well

[Deathspawner]

Seriously.. wow. That is awesome stuff man.. keep it coming! It's great that the different modules worked together no problem.

[OPPAINTER]

I just tryed it at 800MHz running 1T.
1T isn't gunna work very good with 4 sticks
Didn't run at all at 800 1T.

OPP

[charlie]

great work OPP, AM2 is glowing during its' 15 minutes of fame.

[M.Beier]

great work OPP, AM2 is glowing during its' 15 minutes of fame.

Charlie, stop that BS...
AM2 might even be better in 64bit apps, seen the 64bit performance of conroe??

Would be cool to report a mod though

[vapb400]

Charlie, stop that BS...
AM2 might even be better in 64bit apps, seen the 64bit performance of conroe??

Would be cool to report a mod though

seen 64-bit performance of am2? I will guarantee you that the ratio of 32bit performance to 64 bit peformance is almost exactly the same on conroe and am2.

As i said in the other thread, it is the lack of 64-bit programming, drivers, and better OS that is giving the decreased scores.

[STEvil]

s754/939/940 picked up performance going from 32bit to 64bit in most apps.

Conroe only gained in cinebench from what I know (and a synthetic bench that I forget the name of).

If AM2 picks up like 754/939/940 did then that gives some breathing room.

[Getttosmurf]

s754/939/940 picked up performance going from 32bit to 64bit in most apps.

Conroe only gained in cinebench from what I know (and a synthetic bench that I forget the name of).

If AM2 picks up like 754/939/940 did then that gives some breathing room.

That would be intresting to see to bad 64bit os are missing so many drivers or atleast microslows os does

[Chicco85]

Oppainter,

what could you tell about the latency of the memory at the varoius settings?

Thank you...

[CapFTP]

Hi Eric, nice to see you playin on Am2 and DDR2.

Interesting thing to see different performances with 1t/2t.

OT: have u checked recently Overclocking section and took a look at a certain Opteron 154 under s.s ?


/OT

[gigi77]

very impressive results

Am2 in your hands is a POWER

[sierra_bound]

Corsair 6400C3 is not just for AM2. Works pretty good on Intel platform too. 440 @ 3-3-3 so far with 2.38v. I just got the modules and have tested them for less than 30 minutes. No memory tweaks. I just set main timings to 3-3-3-9 and upped FSB/memory speed. Have not tried any other settings yet. I think these sticks will do 450 @ 3-3-3, especially with something better than the AOpen board I'm using.

[OPPAINTER]

Corsair 6400C3 is not just for AM2. Works pretty good on Intel platform too. 440 @ 3-3-3 so far with 2.38v. I just got the modules and have tested them for less than 30 minutes. No memory tweaks. I just set main timings to 3-3-3-9 and upped FSB/memory speed. Have not tried any other settings yet. I think these sticks will do 450 @ 3-3-3, especially with something better than the AOpen board I'm using.

Have you played with other memory, how do these Corsair 6400C3 compare?

OPP

[sierra_bound]

I have Super Talent DDR2-800 that will do 413 @ 3-3-3, so the 6400C3's are much better, at least with those timings. 3-3-3 is about as low as you're going to get with 1GB modules. I tried 3-2-2 at 400, but just got loud beeping on my board. 4-2-2 was also a no-go at that speed. I just tried 3-4-3 and got them to do 444.

Because of the FSB limitation with Yonah, I haven't been able to test the limits of the C3's. In all likelihood they will do 500+ at 4-3-3.

I still like the Super Talents. Even at 4-4-3, they are very fast.

[sierra_bound]

6400C3 slightly tweaked. DDR2-880 @ 3-3-3.



DDR2-887 @ 3-4-3

[OPPAINTER]

6400C3 slightly tweaked. DDR2-880 @ 3-3-3.



DDR2-887 @ 3-4-3

That's some sweat clocks on the Corsair
Assuming it's 1T.

How many volts are you useing?

OPP

[sierra_bound]

Thanks. Using 2.38v (DMM measurement). Hoping for 450 @ 3-3-3 with same voltage when I get a Conroe system.

[OPPAINTER]

Thanks. Yes, 1T. Using 2.38v (DMM measurement). Hoping for 450 @ 3-3-3 when I get a Conroe system.

Looks like the 6400C3 is clocking even better on Intel then it does on AM2.

OPP

[sierra_bound]

I haven't run Sandra, but I'm sure I won't get anywhere near the bandwidth that you're getting with AM2. The C3's do seem to clock well on Intel.