My very clean 8800Gts Vmod.

[Riska]

Hello i wont to show you, how clean a Vmod for the 800Gts can be done, it is whit fixed resistors and a micro 4way dipswitch the 3 lowest switches is for the core giving me 1.315volts and 1.355volts and the last is 1.405volts.
The highest switch is for Vddr and it is givving 2.085volts.
Pretty nice... Sorry for the pic my digicam is dying on me..

[sub_zer0]

dude you gona show or what, no poiny in the post otherwise,

[mukmaster]

Show us high quality PICs please. !!! the one you have has bad lighting , Try using a fluressent bulb to light the area.

[Riska]

I cant show you high q pics because my digi cam is very bad

[Riska]

I will say your are blind if you cant get anything out of that pic or your monitor is very bad yes it is a little bit dark but othervise fine.

http://service.futuremark.com/compare?3dm06=2763143

Here is what i can get in 3dmark06 whit my gfx on 648/1566/2088mhz QX6700 on 347x10 all on air in my little shuttle barebone whit the cover of and fans at 100%

[Movieman]

I will say your are blind if you cant get anything out of that pic or your monitor is very bad yes it is a little bit dark but othervise fine.

http://service.futuremark.com/compare?3dm06=2763143

Here is what i can get in 3dmark06 whit my gfx on 648/1566/2088mhz QX6700 on 347x10 all on air in my little shuttle barebone whit the cover of and fans at 100%

Please excuse some of these people for their lack of manners.
They are so used to someone showing mods with a 10MP camera with $30,000.00 worth of professional equipment.
Honestly, it is a little dark and what should have been said is this:
"Hey my friend, any chance you can get another shot with a little better lighting?
Thanks and good mod"

See, same thing accomplished and everyone is still buddies..
( and the mods aren't wondering if some people forgot all the good manners their parents tought them)
BTW: I can see it with my 55 year old eyes and 10 year old 21" CRT

[Riska]

Thanks for the support man i wil try to yake better pic tomorrow

[Riska]

It is kind of funny

[njkid32]

Did someone call for my help

[Movieman]

Did someone call for my help

Go back to sleep, everythings under control..hopefully

[runmc]

Please explain your volt mod for me please.

[DFI pit bull]

Nice mod Riska, very tidy looking.

[Riska]

Look at this pic there are 4 smal switches on that dipswitch the 4 legs on one side is soldred to ground. nr. 1 is for Vddr and there is soldered a fixed resitor to the leg and the wire to the pcb when set to on i raise the volt.
The other 3 smal switches are for the Vgpu there is also fixed resitores on the legs but they are connected to ech other and you can set one of them to on and the volts go up and if you need more volt you take another to on and then you get more volt and finaly if thats is not enuogh you flick the lasr one to on and get max volt

[giorgioprimo]

should be nice if you can tell us the value of the resistors you used....

[Riska]

The 3 ones for the Vgpu is 1 Kohms and then if i use all 3 i end up on 333Ohms
the one for the Vmem is 4.6 Kohms

[chester]

Hi i followed madshrims guide,and hadda flash back to normal bios for asus 8800 gts.when flashing from 1188 to 1522 i think,If i remeber right.The core speed on ati tool droped from 630 to 520.


mad if u read this please put this n the first paart of ur rearticleocks on most revisions now scale accordingly.I remember when the 6800 had all the working mods.Still have mine.Swithed bios 90 times.oh and tell peeps to put .rom after there original bios or u have to rename.This is only for my asus 8800 but as new bios come out there may b more that scale with shader clock.Ill take core over meme anyday.Intersesting though mem was ustoppable went sky high.See any connection?

[Riska]

What are you talking about??

[cozwin]

Go back to sleep, everythings under control..hopefully

really clamping down on the abuse lately ey mm?

[T_M]

Hi i followed madshrims guide,and hadda flash back to normal bios for asus 8800 gts.when flashing from 1188 to 1522 i think,If i remeber right.The core speed on ati tool droped from 630 to 520.


mad if u read this please put this n the first paart of ur rearticleocks on most revisions now scale accordingly.I remember when the 6800 had all the working mods.Still have mine.Swithed bios 90 times.oh and tell peeps to put .rom after there original bios or u have to rename.This is only for my asus 8800 but as new bios come out there may b more that scale with shader clock.Ill take core over meme anyday.Intersesting though mem was ustoppable went sky high.See any connection?

Most random post of 2007

And no, i dont think we see any connection

[mono666]

^ LOL~~ totally random, I don't see any connection either. BTW the cleanest vmod i've seen!!!! good job. thoese black lines are not wires right?

[Riska]

yes they are thin single core wire wy?

[Chrome_Rust]

Good looking mod, and this is on what flavor of 8800?

[jimmyz]

much better pics, nice mod you did there.

[Riska]

Thanks it is a Inno3d 8800gts 320Mb

[Jack]

Most random post of 2007

And no, i dont think we see any connection

A member here, Gamer, used to have that avatar that Riska now has and Gamer is also member of the Madshrimps community. I think somebody got a bit confused

Anyway, the mod looks very nice!