does the INFINITY NFII-M2 support brisbane
does the INFINITY NFII-M2 support brisbane
nooo, so it lost like i am going to be buying a sempron or a different board, what do you think, an the guy who posted are you that ploygon guy at rchf
call up dfi and request a working bios
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
i don't have any of these parts yet, i was going to build one from scratch so if i did get all the parts i would have no way to flash it because the cpu would not work in the board
nvm, i just bought a asus crosshair
is this still a issue or is someone running it without problems?
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
All it requires is the BIOS to be updated to support the new 65nm processors.
If you have a AM2 90nm processor, then boot using it and flash the BIOS to the most up-to-date BIOS.
If you do not have AM2 90nm processor, then call up DFI and they should send you a updated BIOS chip that you can replace.
You could also take it to a local computer shop and have them flash the BIOS for you.
im using the 2006/08/09 bios which is the latest, at the time of this problem this bios was out so is there a bios i can DL so i dont have to get mailed a chip
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
yes it does support this, thus far I have yet to find any AM2 boards that don't support Brisbane. Only a couple aren't instant drop in and they are uber value. (aka Bios update)
Fast computers breed slow, lazy programmers
The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
http://www.lighterra.com/papers/modernmicroprocessors/
Modern Ram, makes an old overclocker miss BH-5 and the fun it was
There is a beta bios out that lets you use Brisbane cpus in the DFI MII.
Polygon had success with it here:
http://www.rebelshavenforum.com/sisu...;f=54;t=000037
And he hosted the bios here:
http://www.lejabeach.com/DFI/dfinful...ultra2-m2.html
Gigabyte MA790X-UD4P//Dell Latitude D620
Phenom II BE 940//Core 2 Duo 2.0Ghz
2x2GB OCZ Reaper//1GB PC5400
640GB WD Blue//80gb 7200 rpm hdd
Radeon 4850//Geforce 7300 Go
It's on DFI's site too http://us.dfi.com.tw/Support/Downloa...FLAG=B&SITE=US
Running the BIOS now...but I don't have Brisbane core yet :p
PC1:E6320 Asus P5K-Dlx 2GB Crucial PC2-5300 Leadtek 7950GT 160GB 7200.9 LH-18A1P + 16P9S
PC2:Opty 1214 DFI Ultra II M2 1GB Patriot 5600XBLK / 1GB Crucial PC2-5300 D9GMH NEC 2510A
PC3:A64 3000+, Shuttle AN50R, 512MB TCCC, MSI TI4200ViVo, 250GB 7200.10, Benq 1650 +166s
PC4:Sempron64 3000+, Asrock K8NF4G-SATA2, 512MB DDR333, 250GB 7200.10 Pioneer 109
Posting Permissions
Reply With Quote
Bookmarks