*OCM* BEFORE's FX-57 @4208MHz under 2 stager

[funkflix]

Great results!

Did u tested this FX under a mach or vapo before? What was ur result there?

[before]

Thx!

I've only tested it under water; just enough to pass OCCT at 3GHz with stock volts (38°C while loading).

This chip was C3's one; he may be able to answer you. BTW I don't know if he tested it under single stage phase.

[s7e9h3n]

Wonderful work there Too bad I can't say I supplied that cpu
Just one question though - how come there's such a difference in core temps from the first pic to the second?

[before]

Thx

The Spi32M was done with MPS multi processor drivers to fight cold-bug because they give extra heat load.
The setup won't even boot with divers for RAM clock higher than HTT. After all, i've used A64info to change dividers under windows and didn't need MPS drivers anymore.

[s7e9h3n]

Thx

The Spi32M was done with MPS multi processor drivers to fight cold-bug because they give extra heat load.
The setup won't even boot with divers for RAM clock higher than HTT. After all, i've used A64info to change dividers under windows and didn't need MPS drivers anymore.

But why would you use MPS Multi when running 32M and not 1M? I would think 1m would be harder to run without the tweak.
Using upclock dividers shouldn't be a problem even with the cold-bug. Cold-bug only limits HTT, and not mem speed

[piotres]

Awesome FX-57 You have

I haven't thought that 0516 can go so high with so cold evaporator ...I have rather thought that is work for 0530APMW ..I was mistake

Regards
Peter

[funkflix]

Thx!

I've only tested it under water; just enough to pass OCCT at 3GHz with stock volts (38°C while loading).

This chip was C3's one; he may be able to answer you. BTW I don't know if he tested it under single stage phase.

Thank u too!

It seems, that this cpu really likes the cold! My friend wrote C3 a PM about the results under single stage... it is just the question, if his FX55 0516WPMW scales like this 57 with the cascade. He did a validation today, with a mach2 and 3800MHz, with about +5°C. I think this cpu has potential, with the two stage cascade he will recieve the next week.

http://valid.x86-secret.com/show_oc?id=94717

[Rol-Co]

Thank u too!

It seems, that this cpu really likes the cold! My friend wrote C3 a PM about the results under single stage... it is just the question, if his FX55 0516WPMW scales like this 57 with the cascade. He did a validation today, with a mach2 and 3800MHz, with about +5°C. I think this cpu has potential, with the two stage cascade he will recieve the next week.

http://valid.x86-secret.com/show_oc?id=94717

He need to do his best again...... 0516WMPW too

under single stage default vapo Ls
http://valid.x86-secret.com/show_oc.php?id=57664

[G H Z]

Love that first pic, looks like you found a nice one Before

[Onepagebook]

let me decode that bad boy
"1241482E50213"....Nice job buddy!!

[bri1]

my jaw droped!

Go for 4.5

[farksy]

Nice one man ! =D. And to know that everyone was trying for 4Ghz only a few months ago with the same hardware =D

[before]

@s7e9h3n: In fact, I've found how to change the upclock dividers thx to A64Info freeware after running 32M. Thus the use of MPS was not needed anymore for running 1M.

@piotres: Thx buddy This FX-57 is really a great clocker. BTW It doesn't seem to have a unique memory controler, but can I be sad? Guess not!

@funkflix & Rol-Co: wOOt! That's a good FX-55 0516WPMW; I've owned one with core serial #484 but it didn't clock higher than 3705MHz suicide @-61°C core (it would do a little better with a tweaked OS, but just for few MHz). This FX-55 was also out of breath downwards -50°C core.

@G_H_Z: Thank you! That's lucky, I didn't expect to clock that high

@OPB: Thx bro! It seems me that you've decoded it right... I haven't really think about making it unreadable, but about highlighting both core & batch #

@bri1 & farsky: Thank you guys

[SoF]

4.2GHZ on AMD FX is sick!
I'm not even waiting for the valid link because I never validated an OC in this way on my own
good luck on getting benches >4 GHZ - I'm sure you will handle this

[ncsa]

Great work before

[before]

@SoF: Thx mate! Actually I'm waiting for R1150 for benches over 4GHz

@ncsa: Nice to see you here buddy! Thanks for your support! (sweet avatar you've got here...)

[Hystrix^]

congratz Before with your WR, really an awesome chip you got there. I cant wait for the 3D benshes

[NapalmV5]

damn! 4.2ghz fx.. congratz!

LOL @ SPi, my 3.1ghz yonah @ 19.xxs

damn u intel.. lol

[Naunaud128]

Good job m8

OCM rocks

[wittekakker]

Nice job man, hope I can reach the same limits with a 0530.
Concratz on the WR

[boblemagnifique]

Very nice job my friends !!!!

[Gamer]

great result, keep up the good work !!!

[before]

Thank you guys

@boblemaginifique: Yeh buddy, it's quite interesting to note, as you know, my FX-55 0516WPMW wasn't as a great cloker as this FX-57 0516WPMW, but was a far better memory controler...

[before]

Here's my last bench because I wasn't able to find better refrigerants... I've decided to sell the chip as I need money for Conroe

[SoF]

makes me a bit upset as I would have loved to see 4 GHZ 3DM01 with this chip
But if you can get this out of FX I'm sure you will rock on Conroe OC