Venice, Stepping and Oc Database

[SET]

I think I'll drop by Monarch tomorrow and see if they are still on the 0516s or if they have moved on to the 0517s

Excellent.

Please it publishes informed on its search and I will be been thankful to him.

Until soon

[TEDY]

300*9 1.4v

[TEDY]

Venice 3000+0517DPMW

2.8G only 1.376v
cooler xp-90+ 9x9 2500rpm fan

what is your max ????

[Toki]

that makes sense then

yupiiiiiiiiiiiiiiiii

290*9 works now at 1.375 bios...1.32 windows

damn 04/14-3 ... viva 05/15-3

Ehm, and what I've said yesterday?? Eh eh eh

[Dani]

I bought two week17 3200+ Venice today:

- LBBLE 0517BPEW 0057

I set BPEW under Zalman 7700cu and first boot to the CPU@251*10 1.4Vcore and straight to StressPrime2004

Ok, this BPEW can do under 24ºC air with Zalman 7700cu:

- 2755MHz@1.64Vcore StressPrime2004 now for ~50min.
- SP32M@2800MHz 1.61Vcore, did'nt test more
- 2853MHz@1.61 straight after 32M

..should put VapoChill LS on that chip

[SET]

Ohhh TEDY.

It seems that you make every day better.

Perhaps you I could occur a hand with this sluggish Venice?

Very good work friend, Congratulations.

[gocchin]

0517BPDW 3200+ Vapo LS 10x330@1.632v BH-5 2-2-2-5 275@3.7v

cpuz verification: http://valid.x86-secret.com/show_oc?id=19999

[qk4722]

what is your max ????

323x9 1:1 1.456v pi 4m pass

[irenic]

i have 3200+ LBBLE 0518DPBW.. seems like i'm the first one to have this stepping. Still havent play with it yet but hopefully is better than my 3500+ caa2c

[TEDY]

315*9

1.456v (1.5v bios)

[Dani]

week17 3200+ Venice:

- LBBLE 0517BPEW 0057

Same CPU and same Zalman 7700CU:
StressPrime2004 2754MHz, 1.64Vcore

[KingYubbo]

I can get the 3200+ LBBLE 0517 GPMW chip in Australia. Any good you think?

[lehmin]

323x9 1:1 1.456v pi 4m pass

cooler? (cant remember anymore:P)

[TEDY]

323x9 1:1 1.456v pi 4m pass

please try 16 or 32mb pass super pi and prime95 for 1 hour.

[Dani]

Same 0517BPEW CPU and same Zalman 7700CU:
StressPrime2004 2754MHz, 1.64Vcore

+12h 2754MHz 1.64V StressPrime2004...
Now SP2004 2800MHz 1.64V, about 52min. has gone and temps are close 60ºC, roomtemperature is around 26ºC, its summer now

[eva2000]

I can get the 3200+ LBBLE 0517 GPMW chip in Australia. Any good you think?

grab it and find out

[TEDY]

dani what PSU do you have ??? 1.64 in windows or bios ?

oh windows , so it's like 1.7v in bios

[zoob]

Hi!

I just picked up a DFI NF4 Ultra-D and a 3000+ LBBLE 0515FPMW
I've only seen one result with that chip, so hopefully I can match or beat it
The store only had three of these, and a 0516 3200+..

Argh, now I have to get a PCI-E video card, AND a real PSU. I got one of those cheap 20->24 pin adapters to go with my Antec SL350S for now.

[dpoverlord]

Has anyone gotten one from Newegg I wanted to buy one tommorow...

[Absolute_0]

3200+ Venice LBBLE0515APAW from Monarch
275x10 = 2.75 Ghz stable, 1.475 Vcore
aircooled, look in sig

i'll get a picture up sometime soon

[L@TrO]

users.skynet.be/bk265593/29sec.JPG testrun with boxed cooler It's a LBBLE 517 APQW 3000+ by the way.

[Absolute_0]

users.skynet.be/bk265593/29sec.JPG testrun with boxed cooler It's a LBBLE 517 APQW 3000+ by the way.

nice, push for more

[TheMeatFrog]

bah I must have one of these 0517s

[Jupiler]

bah I must have one of these 0517s

So do I, but I haven't had the time to go out and check some stores.
And probably won't have the time next week either.

[overcrash86]

my first boot stock box cooling 27°C into my room :



always aircooled :




Watercooled (25°C into room) :



NO OPTIMIZED just fast stability test

and WC at night :

1.728v :

http://valid.x86-secret.com/show_oc.php?id=20196



all for the moment