23db for the fan only or for the entire system?
23db for the fan only or for the entire system?
Compressor is about the same silent as fan.
Random pics:
Best Regards
Last edited by LittleDevil; 08-17-2010 at 11:04 PM.
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
This thing gets better and better!
But as I said earlier: the upper and the lower fan-grills wood look better if they both had the same design!
If you can make it honeycomb-style maybe that would look even better...
Your case is dope!
I understand you are going for low air restriction in your grills, but I agree with the above poster--it would look so much better if they were uniform. I second the honeycomb--that is a design that looks decent with big holes.
-------------------------------
Not From Concentrate
All Projects
Previous Projects:
S3 Mini ITX Chassis
The ArK
Uriel
Israfel
Veritas
Eldritch
Thanks for comments. Does anyone have picture of honeycomb on PC case?
Kind Regards
Last edited by LittleDevil; 08-19-2010 at 12:15 AM.
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
That is what I was thinking of, but there is a really nice artsy example I am looking for that someone did a while back, I'll edit this post when I find it.
-------------------------------
Not From Concentrate
All Projects
Previous Projects:
S3 Mini ITX Chassis
The ArK
Uriel
Israfel
Veritas
Eldritch
We will see
Best Regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Some more testing with PSU inside.
Fan speed adjustment.
5cm more space for PSU.
280W heatload.
Kind Regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Wow. Beautiful work there. You have talent
This is awesome!
One question from a phase-noob: my understanding is that when you are booting the system, you need to first start the compressor and wait for it to reach it's temp. How long does this take with these compressors?
Q.E.D.
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
So a 19cm deep psu, like the enermax 1250watt will fit??
My hardware changes to fast and to much to keep a sig up to date. I just gave up on the idea.
Last edited by LittleDevil; 08-21-2010 at 11:12 AM.
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Picture of set.
Kind Regards
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
truly awesome! lanparty FTW!
ASUS P8Z68V-PRO
2500k 4.7ghz
2X4Gb Ballistix Tactical Tracers
Diamond HD6950 (unlocked) 2gb
Enermax REVOLUTION 1050W
Vertex 2 60Gb & Samsung F3 1TB
arrived today
perfectly packed and everything awesome
more later this week, gonna post some more with a mounted sr-2 and the final system with the 4way
sry was bit busy and I'm still waiting for some armaflex and watercooling stuff....at least I had time for some insulation and test mounting:
later more:
gonna mount the sr-2 and well I hope the devil won't kill me...but I gonna change the top to mount a quad radiator and add some space
EDIT:
for those who are always asking: yes an enermax revolution 1250w or a strider 1500w will fit without any problem
Really nice! Waiting for final pics with watercooling installed =)
------------------------------------------------------------------------------------------------------------------------------------------------
My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com
LD PC-V8 Watercooling Cases: LINK
LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
-------------------------------------------------------------------------------------------------------------
www.ldcooling.com
Find US on Facebook
Ohh man LittleDevil I've been keeping an eye on this in good old lurk fashion, but I fell off the past couple of weeks. I had no idea someone had one, cant wait to see it all bolted up and running!
Overclocking and freezing-things noob.
well not that much progress and I hope I won't get killed for it but I changed the top a bit ^^
and added another lcd for system informations
Thats awesome sargatanas, are you just going to phase cool one cpu?
I7 920 at 4.0ghz - EK Supreme HF
P6T Deluxe V2 Mobo - EK Mosfet & EK NB/SB
6gb Corsair 1600mhz RAM
Zotac 470GTX - EK FC
2x 60gb OCZ Vertex 2 RAID 0
140mm External Rad Stands Available Here
Bookmarks