Nothing but the board and disk here, , as far as pure ocing is concerned, this seems to be doing its job pretty well but for 24/7 use, it certainly needs a few BIOS updates
EVGA Classified (MSI XPower), 980X (i5 661, i5 680, i7 950, E8600, QX9650, E8400), Thermalright Venomous X , Kingston Hyper X 2000Mhz, MSI 480GTX (5870, 4870x2, Visiontek 3870 x2, XFX 8800GT w/HR03GT), DELL E248WFP, CM Silent Power Pro 1000W, Seagate 1TB + 1TB + 500GB+500GB, Auzentech X-Plosion, CM Bench Station, AL 641, MX 518, New G15 Keyboard
HWbot - Team: XtremeSystems
XS cruncher - Team: XtremeSystems
OCN Feedback
HEAT
*** Being kind is sometimes better then being right.
new bios ... 121
http://rapidshare.com/files/40133329...1_rar.zip.html
i have a serius dubt about the stability of tath mobo......
watt output problem
usb speed
sata bug
qpi bug 980x
why msi? why?
Do you have the board Andrea ? Works flatout here with GT over 6Ghz, dunno what the Watt problem is... I Hope Raju get's it out in the open so we can relay it to MSI too , maybe to force them to change it in a new rev...
QPI problem exists also with my UD9 sample,so a bios could be the fix... Did USB3 tests nothing slow there... will have to check the other ports...
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
The input inductor "problem" I stated was for the sample boards only - it has been fixed in retail. It's not good to have an OCP limit set past the maximum value of the input inductor. The other "problem", I have relayed back to MSI and it could be a number of things that add up to it manifesting. It won't affect outright CPU MHz in most instances - but will affect stability in certain scenarios depending upon what you're looking for the board to do.
Later
Raja
Official MSI 1.2 BIOS
http://download1.msi.com/files/downl...xe/7666v12.zip
board seems pretty stable under LN2, but i think it must be damned ... Few days of benching, and 2 (yeah two) 980X are dead and one Corsair GT kit too, no extreme voltages, no extreme benching ... will see how many components will survive MOA 2010...
EVGA Classified (MSI XPower), 980X (i5 661, i5 680, i7 950, E8600, QX9650, E8400), Thermalright Venomous X , Kingston Hyper X 2000Mhz, MSI 480GTX (5870, 4870x2, Visiontek 3870 x2, XFX 8800GT w/HR03GT), DELL E248WFP, CM Silent Power Pro 1000W, Seagate 1TB + 1TB + 500GB+500GB, Auzentech X-Plosion, CM Bench Station, AL 641, MX 518, New G15 Keyboard
Doubt:
MSI XPower or Gigabyte X58A-UD7?
Analyzing greater stability, features and technology. What would be better between the two? Both motherboards are the same price. Thanks!
My rig: [i7-990X ES w/AC MX-4 @ 4.5GHz by Prolima Super Mega / Fox x58 BloodRage P11 / Sapphire CFX HD 7970 OC
A-Data v2.0 2200MHz C8 / A-Data v2.0 1866MHz C8 / Dom.GT 2000C7GTF / Kingston 2000MHz D3T1K3/6GX (All IC Hypers)
Plextor M5S 128Gb Raid0 / WD 4x VelociRaptor 300Gb (10K) WD3000HLFS / Asus Xonar Essence STX / Seasonic 860 Platinum
Cooler Master Cosmos II UT w/10x Noctua P12 fans + 2x P14 FLX + 2x Scythe GT P-15 (1850) / BenQ XL2420T 24" 120Hz
S&S 6g, 7H, Sensei Rubber, 9HD, QcK / Tt Meka G1 / Logitech G5 v2 / Razer Destructor / Puretrak Talent / Senn HD598]
*My English
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
My rig: [i7-990X ES w/AC MX-4 @ 4.5GHz by Prolima Super Mega / Fox x58 BloodRage P11 / Sapphire CFX HD 7970 OC
A-Data v2.0 2200MHz C8 / A-Data v2.0 1866MHz C8 / Dom.GT 2000C7GTF / Kingston 2000MHz D3T1K3/6GX (All IC Hypers)
Plextor M5S 128Gb Raid0 / WD 4x VelociRaptor 300Gb (10K) WD3000HLFS / Asus Xonar Essence STX / Seasonic 860 Platinum
Cooler Master Cosmos II UT w/10x Noctua P12 fans + 2x P14 FLX + 2x Scythe GT P-15 (1850) / BenQ XL2420T 24" 120Hz
S&S 6g, 7H, Sensei Rubber, 9HD, QcK / Tt Meka G1 / Logitech G5 v2 / Razer Destructor / Puretrak Talent / Senn HD598]
*My English
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
As of now for sure RE3, but I am sure once the bugs are fixed on the XPower its gonna be a pretty good motherboard for Extreme Overclocking at a very cheap price(infact it still is, since once you figure out the minor bugs, they dont bug you during extreme overclocking, :P)
EVGA Classified (MSI XPower), 980X (i5 661, i5 680, i7 950, E8600, QX9650, E8400), Thermalright Venomous X , Kingston Hyper X 2000Mhz, MSI 480GTX (5870, 4870x2, Visiontek 3870 x2, XFX 8800GT w/HR03GT), DELL E248WFP, CM Silent Power Pro 1000W, Seagate 1TB + 1TB + 500GB+500GB, Auzentech X-Plosion, CM Bench Station, AL 641, MX 518, New G15 Keyboard
My rig: [i7-990X ES w/AC MX-4 @ 4.5GHz by Prolima Super Mega / Fox x58 BloodRage P11 / Sapphire CFX HD 7970 OC
A-Data v2.0 2200MHz C8 / A-Data v2.0 1866MHz C8 / Dom.GT 2000C7GTF / Kingston 2000MHz D3T1K3/6GX (All IC Hypers)
Plextor M5S 128Gb Raid0 / WD 4x VelociRaptor 300Gb (10K) WD3000HLFS / Asus Xonar Essence STX / Seasonic 860 Platinum
Cooler Master Cosmos II UT w/10x Noctua P12 fans + 2x P14 FLX + 2x Scythe GT P-15 (1850) / BenQ XL2420T 24" 120Hz
S&S 6g, 7H, Sensei Rubber, 9HD, QcK / Tt Meka G1 / Logitech G5 v2 / Razer Destructor / Puretrak Talent / Senn HD598]
*My English
i honestly dont care for the price
if the xpower was good i woulda paid more for it
i'm not gonna wait 6 months for fixes
they have been fixin the board for months now n still
on paper the xpower is great but i got no faith in msi for bios fixes
if they do fix it one day i'll buy 1 but look like a few months off maybe a newer rev
Last edited by zsamz_; 06-24-2010 at 02:05 PM.
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
My rig: [i7-990X ES w/AC MX-4 @ 4.5GHz by Prolima Super Mega / Fox x58 BloodRage P11 / Sapphire CFX HD 7970 OC
A-Data v2.0 2200MHz C8 / A-Data v2.0 1866MHz C8 / Dom.GT 2000C7GTF / Kingston 2000MHz D3T1K3/6GX (All IC Hypers)
Plextor M5S 128Gb Raid0 / WD 4x VelociRaptor 300Gb (10K) WD3000HLFS / Asus Xonar Essence STX / Seasonic 860 Platinum
Cooler Master Cosmos II UT w/10x Noctua P12 fans + 2x P14 FLX + 2x Scythe GT P-15 (1850) / BenQ XL2420T 24" 120Hz
S&S 6g, 7H, Sensei Rubber, 9HD, QcK / Tt Meka G1 / Logitech G5 v2 / Razer Destructor / Puretrak Talent / Senn HD598]
*My English
Excelent MB, much better than my oldie Classified 760.
First run, no tweaks.
1 x SSD Corsair xtreme 64GB
1x 160gb Seagate Sata
1x 250gb W.Digital Sata
1x 500gb Seagate Sata 7200.12
1x 80GB W.Digital Sata
Unknown_Team / Owner-Founder and Overclocker.
Round up 4 Coolers-Thermalright-Thermaltake FRIO-Noctua
Im having lots of issues with this new board.. this is my second cause the other failed... Everytime I do over 5.4 on GT it gives me memory errors... this has the ocp mod at 40k.. even lowered to 30k... My 760 classy is a way better board then this....
bugged divider ? We had no issues here with GT over 6Ghz, rams 1000MhzC7 and 4600 uncore speeds...
You need to explain more and show us screenshots etc to get help...
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Is this a problem all across the line or just board per board?
Where courage, motivation and ignorance meet, a persistent idiot awakens.
Bookmarks