XtremeSystems Forums - View Single Post - ** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

zodden · 10-28-2008, 02:15 PM

I have been tweaking for about 7 days now. It has been a

to get Prime/Orthos stable at higher FSB with acceptable (for me) voltages but I finally accomplished it. I was able to do 20 runs of linpack, 2 hours of OCCT, super-pi runs and prime small ffts for an 18 hour run before I manually halted. Blend is what I had a problem with. I tried almost every combo I could.

Maybe this will help somebody else. When I lowered my MCH reference to .70 I finally got 24 hours of Orthos blend.

So here is my new 24/7 settings.

10-28-2008, 02:15 PM	#79
zodden Xtreme Member Join Date: Mar 2007 Location: New York City Posts: 143	I have been tweaking for about 7 days now. It has been a to get Prime/Orthos stable at higher FSB with acceptable (for me) voltages but I finally accomplished it. I was able to do 20 runs of linpack, 2 hours of OCCT, super-pi runs and prime small ffts for an 18 hour run before I manually halted. Blend is what I had a problem with. I tried almost every combo I could. Maybe this will help somebody else. When I lowered my MCH reference to .70 I finally got 24 hours of Orthos blend. So here is my new 24/7 settings. __________________ E8400 @ 4.2 Ghz (525x8) Gigabyte EP45-UD3P Corsair Dominator 4GB (2 x 2GB) PC2 8500 2.1V PowerColor 4870x2 150GB Western Digital Raptor 500GB Western Digital 5000AAKS Westinghouse LVM-37w3 1080p Monitor Vista64 Cooling: CPU-OCZ Vendetta2+Scythe S-FLEX SFF21F 120mm, Silverstone TJ09 case with 4 120mm yate loons.