Has anyone reported Max FSB on these with a P35? I just got mine and after I try my q6600 on it, I may have to get one of these babys to play with.
Has anyone reported Max FSB on these with a P35? I just got mine and after I try my q6600 on it, I may have to get one of these babys to play with.
"Fanbouyism is a disease we all carry but most have immune systems that keep it at bay. However when coupled with a bad dose of ignorance and Low IQ numbers, this disease can be accelerated out of control to boast insane amounts of irradic, Defensive, or Aggressive behaviour and unexplainable devotion to a product or label whether or not that item is truly deserving" -DR Ima Noober, June 1, 2003
Asus P5QL-Pro
Kinston HyperX 4x2 gigs 5-5-515@ 1120 mghz
Q6600 - 3.33 GHZ
2x Sapphire 4870 1 gig
Galaxie 850 PSU- this thing rocks
audigy 2zs gamer
4x Freezones to cool Proc. Idle @ 10c- Full load @29c(soon to be 5x in my new twelve hundred case)
Vista ultimate 64
How much can these take heat? I'm now running at 2.5GHz and load temps are 68 according to the coretemp 0.95. I'm using the copper core boxed cooler from my old P4 630 with a thin layer of AS5 on the cpu.
[i5 2500K, ASrock extreme3 gen3, Corsair Vengeance LP 8GB 1600MHz, Palit GTX570 Sonic Platinum, CM HAF932, Antec Truepower New 650w]
i can do 393x 8 with my e2140, orthos stable but the max i can memtest with is 375x8. Never tried a lower multi. vcore is 1.55 in bios and cooler is scythe infinity with revoltec airguard 120mm(18db) temps are maxed 58 C and i used coollaboratory pro liquid metal on both the cpu and cooler. I'm living at the attic here so room temp is fairly high ( around 24-27 atm ).
my main board is a gigabyte p35 ds3p and mem is d9gmh ( sucks )
ram is memtest stable is 1125 with 5-4-4-8. wont do 4-4-4-8 nor 5-6-6-18 at higer speed.
now i've lowerd the vcore to 1.375 in bios. still testing orthos. temps are around 45-50 depends on room temp. if i set vcore ti 1.3500 volt my memory cant pass memtest but run's orthos without any problems. vdimm is still 2.3v
i have to say i'm pleasantly suprised with this cpu. this cpu + single 7800gtx = 5211 3dmarks 06
amd3700+ @ 3ghz + sli = 6301 3dmarks 06
Last edited by LyP0; 06-13-2007 at 02:55 PM.
Got my E2160 yesterday.... of course once again "suprisingly" schaisse individual for me ...3,1Ghz wit 1.4Vcore, Zalman 7700AlCu. Have to test some more if even that is surely stable. More volts and the temps are of the roof >75C. Mobo MSI P35 Neo. HS is one fu#in groocked politician.
Edit:Orthos Large FTT Ram test stable 2.6GHz ...this one is truly great!
Last edited by luseruser; 06-13-2007 at 11:31 AM.
[i5 2500K, ASrock extreme3 gen3, Corsair Vengeance LP 8GB 1600MHz, Palit GTX570 Sonic Platinum, CM HAF932, Antec Truepower New 650w]
Just ordered 2 e2140's. They should be here friday, and so i have the weekend to muck about and see what they can do. Once i get them, i will post back with there results. Basically gona run the best one on my main rig, and run the slower one else where. haven't figured that out yet, heh
- Paul
Intel Q6600 (0738) @ 3.6Ghz (1.45v)
Abit IX38 Motherboard
4GB Memory (2x Team Elite / 2x OCZ Plat)
2 x HD 4850 512MB Crossfire
2 x 200GB Maxtor 10 Drives (RAID 0)
LG IDE DVD-RW Lightscribe drive
2 x LG SATA DVD-RW drives
Custom waterloop - low end
X-Fi XtremeGamer Soundcard
Logitech Z-2300 Speakers
Silverstone TJ09 Silver + Window Case
Jeantech 700W Storm PSU
Windows Vista Premium 64-Bit Retail
hi, can someone help me by running pcmark05 with this processor at any speed u r now.. just wanna get some idea the difference between these processors and others..
thx a lot!
Intel Core i7 870,
MSI P55 GD65,
4x 2048mb DDR3 1600 Corsair Dominator,
Sapphire 5870,
Corsair HX850W,
2x 640GB WD sata II,
1x 1TB WD Sata III,
Here u go
395mhz x 8 @ 1.37vcore
400mhzx8@1.37vcore. Managed to run Pi 4 million. Freeze on Pi 8mil run. Will tweak further. All tests were done on Gigabyte P35 DS3R
Last edited by memory; 06-13-2007 at 11:41 PM.
Just upgraded from a S754 Sempron and this thing has been easy to clock so far.
From 30 minutes after I plugged everything in.
http://valid.x86-secret.com/show_oc?id=207529
Not bad for having next to no experience with C2D and using the stock HSF.
hello
ASUS P5W DH
E2160
TUNIQ TOWER
GSKILL DDR2 PC6400 HZ
I Was wondering, how do the compare to AMD's - I mean this one dosent have advantage of more cache, so in every day life/Gaming does this little conny still beat the cra out of a Windsor or Brisbane?
[i5 2500K, ASrock extreme3 gen3, Corsair Vengeance LP 8GB 1600MHz, Palit GTX570 Sonic Platinum, CM HAF932, Antec Truepower New 650w]
I will get images for this, but both turned up. Both have the same package date(05/14/07). Both have the same FPO# code : L702C621
Only difference i can see is on the black part on the pcb, where one says A1519, and the other is A1539. I can only presume that means one is chip number 19 of the wafer, and the other is 39. Maybe someone can tell me.
Both are FSB walling i think. 19 is at 394mhz FSB, and 39 is 389mhz FSB. Anyone got some tips on getting over it. Gona fit up the watercooling later to see if it helps.
Still, both are on stock volts at this point, and i am using a DFI CFX3200 T2R motherboard. Tried some voltages, but not too much. Be back later with pics
- Paul
Intel Q6600 (0738) @ 3.6Ghz (1.45v)
Abit IX38 Motherboard
4GB Memory (2x Team Elite / 2x OCZ Plat)
2 x HD 4850 512MB Crossfire
2 x 200GB Maxtor 10 Drives (RAID 0)
LG IDE DVD-RW Lightscribe drive
2 x LG SATA DVD-RW drives
Custom waterloop - low end
X-Fi XtremeGamer Soundcard
Logitech Z-2300 Speakers
Silverstone TJ09 Silver + Window Case
Jeantech 700W Storm PSU
Windows Vista Premium 64-Bit Retail
mine is package date 05/03/07. fpo# q702a498. iv'e been playing with this chip for nearly 5 day's In the first hour i found the max. This is insane, 8x375 is no problem, it can do this even at 1.26 volt. But it wont go any higher. not even with 1.55 volt and beyond. temps atm are 35 degree's stressed.
cpu : e6850 @ 3.5ghz
cooler : boxed
mem : balistix 8500 @ 1000mhz 4-4-4-4
board : asus p5k-e wifi
graphics : 7800gtx
harddisk : wd raptor 74gb
dvd : nec 7173A
dvdrw : optiarc 18x
psu : enermax liberty 620W
screen : dell 3007wfp hc
Right. I am no genious when it comes to understanding CPU's and motherboards, but what about the FSB strapping?
I was thinking maybe we should build a list of fsb wall, cpu and motherboard, as I was thinking maybe there is a way that they go out of sync with the fsb the 2mb and 4mb ones do. Also it is the allendale PCB and the conroe silicon.
Maybe i am just hoping, but both mine are doing it at 394 and 389mhz. The next fsb is every now and then it works, and 2mhz up it never works.
- Paul
Intel Q6600 (0738) @ 3.6Ghz (1.45v)
Abit IX38 Motherboard
4GB Memory (2x Team Elite / 2x OCZ Plat)
2 x HD 4850 512MB Crossfire
2 x 200GB Maxtor 10 Drives (RAID 0)
LG IDE DVD-RW Lightscribe drive
2 x LG SATA DVD-RW drives
Custom waterloop - low end
X-Fi XtremeGamer Soundcard
Logitech Z-2300 Speakers
Silverstone TJ09 Silver + Window Case
Jeantech 700W Storm PSU
Windows Vista Premium 64-Bit Retail
Yeah just checked again and the stepping is correct [L651B***].
Hmmm this may explain my high temps!
Would seem my E2140 chip is concave as you can see in the photo there was no contact whatsoever between the heatsink and the centre of the IHS?
I refitted it this time using the pea-blob method and will leave that for a week or so but I think this CPu may need lapping lol!
Last edited by Big.Wayne; 06-17-2007 at 10:21 AM.
XtremeEfficiency™
I dont think it's the mainboards that refuse to cooperate. even with quad core's the p35 can handle up to 500 fsb so these should be a piece of cake. It's the cpu, just like with coldbug on the athlons. there's no acurate way to predict where your cpu is fsb walling/coldbugging. some steppings are better than others but you cant be certain.
cpu : e6850 @ 3.5ghz
cooler : boxed
mem : balistix 8500 @ 1000mhz 4-4-4-4
board : asus p5k-e wifi
graphics : 7800gtx
harddisk : wd raptor 74gb
dvd : nec 7173A
dvdrw : optiarc 18x
psu : enermax liberty 620W
screen : dell 3007wfp hc
Last edited by Devious; 07-28-2007 at 02:56 AM.
Q9650 @ 4Ghz - 1.216v
E8600 @ 4500Ghz - 1.34v - Q822A435
Q6600 @ 4014Ghz & E2160 @ 3.6Ghz
Silverstone Zeus 850w, Maximum formula,
Custom Water Cooling, 4GB OCZ 9200 Flex II,
Xfire 4850's 800/1150, 3D Mark 06 , Vantage,
Frontlineforce
Made this for a long needed upgrade for a friend. TTBT for cpu, NB has an AMD stock cpu cooler Delta fan cable tied on since it is a pretty plain case and doesn't have exceptional airflow. Paste used was MX-1.
E2160 FPO # is 49A, OCZ Titanium Alpha DDR2-1000, DFI P965-S, Corsair 620HX PSU, Sapphire x1950pro 265 MB, some ooold Seagate IDE drive thats still in use.
Ambient temp was 36 degrees Celcius. Stays stable at 25 degrees ambient but needed +25 mV in BIOS to hold up under my torture test at 36 degrees ambient. Stays under 1.35 v after droop.
Ram was 445 Mhz 4-4-4-10 2T@ 2.1 V at 200 mhz strap. CPU is E2160 FPO is 49A.
I'm pretty sure it can go faster but everything here is warrantied still, this is a 24/7 end user PC. The FSB seems
to mess up at about 400ish, even if I adjust the strap and memory settings. Haven't tried to overvolt the NB or VMCH either. 49A seems to do well, I tested this gaming too and seems rock solid stable, no problems reported from friend.
Last edited by Nefilav; 07-16-2007 at 12:35 AM. Reason: link to picture poofed
Just test E2140 on abit AB9 QuadGT today.
Here are the preliminary results
Will update soon!
Last edited by after; 07-07-2007 at 11:31 AM.
my E2140 seems to top out at ~380 FSB
Even with multi of 7 it won't be able to clock higher.
Hope my Mach I can help a bit
| '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
| '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
| '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67
| '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
| '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
| '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
| '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled
| '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW
Originally Posted by saaya
Hello,
I bougth the E2140 and E2160 a while ago and begon to overclock those little things.
With my E2140 i come on 400 x 8 with 1.200VCore, any higher the 400 FSB and he will not boot ? Even if i give hem 1.3, 1.4 , 1.5 even 1.6VCore...
Very strange to me ... I can get 407 x 8 but then windows freezes after 4-5 min...
My E2160 can boot on 333 x 9 with standard VCore, for 3.2Ghz i need 1.4Vcore, for 3.4Ghz i need 1.5Core, and with 1.55VCore i can get to 3.55Ghz but also then he freezes after a few minutes...
Batches:
E2140 = L702C646 [PACK DATE 05/14/2007]
E2160 = Q701A171 [PACK DATE 04/25/2007]
My knowledge about the batch numbers is 0% , so can somebody say to me what i can do ?
Anyone got M0 stepping yet ?
Check here for the physical comparison with older L2 stepping.
Bookmarks