DFI Infinity 965-S Tests (535 FSB 1:1)

[mascaras]

I guys

i decide open this thread to share with all of you the tests and results with my DFI Infinity 965-S












System:

- E6600 L628B @ Watercooled
- DFi Infinity 965-S @ Stokcooled
- 2Gb TG5300 Micron D9
- OCZ GXS 600W
- BFG 8800GTS 320mb OC1
- Samsung 225BW 22"






First of all get my 24/7 settings stable :



E6600@3600mhz -450x8 1:1







Spi1M with 24/7 settings-E6600@3600Mhz (400x9) @ DDR2-800Mhz 3-3-3-9







Everest 24/7 settings





================================================== ==========================================




some 3D action



CPU: E6600 @ 3600mhz (400x9)
Ram: TG5300 @ DDR2-800Mhz 4-4-4-10
VGA : BFG 8800GTS OC 320Mb 600Mhz / 1700Mhz (OverClock : 50Mhz core // 50Mhz memory )
3DMark 2001 : 58925 Marks






================================================== ============================================



CPU: E6600 @ 3600mhz (400x9)
Ram: TG5300 @ DDR2-800Mhz 4-4-4-10
VGA : BFG 8800GTS OC 320Mb Default
3DMark 2006 : 9926




E6600@3600mhz -- BFG 8800GTS 320mb DEFAULT






================================================== ========================================


CPU: E6600 @ 3600mhz (400x9)
Ram: TG5300 @ DDR2-800Mhz 4-4-4-10
VGA : BFG 8800GTS OC 320Mb Default
3DMark 2006 : 17643




E6600@3600mhz -- BFG 8800GTS 320mb DEFAULT






================================================== ================================================




Couter strike Source -1680x1050 @ BFG 8800GTS Default @ E6600 3600mhz (400x9)








================================================== =====================================




Now lets test some FSB action and SPi




SPi1@ E6600 @ 3800mhz (423x9 )1:1








SPi1M @ E6600 @ 3915Mhz(435x9) 1:1







DFI Infiniti 523FSB 1:1 --- BOOT FROM BIOS












and max FSB tested :


DFI Infinity 535FSB 1:1 DDR2-1070mhz 4-4-4-12 -- Boot From BIOS (STOKCOOLED)







http://valid.x86-secret.com/show_oc?id=187773





more testes later



regards

[georgesod]

Can u test 4:5?

[AMD-me]

I wish I had waited and gotten one of these, my P5N-E SLi can't even do 425 FSB.

How big of a difference does 1:1 make on intels?

I currently have to run a divider to reach DDR1000 on my Ballistix. How big of a difference is 500 x 6 1:1 vs 375 x 8 4:3?

[JWilson]

How about listing your settings so we can all enjoy your success! I did the hard part


CPU:
Memory:
BIOS:
Cooling:

Ratios/Clocks
CPU Feature:
Ratio and clocks:
NB Strap Select:

DRAM Timing
#1:
#2:
#3:
#4:
#5:
#6:
#7:


Cas:
Trcd:
Trp:
Tras:
Pre-to-Act:
Trfc:
MCH Lat:
Twr:
Twtr:
Trrd:
Trdwr:
Twrwr:
Trdrd:
Twrrd:
Trtp:
Pre-to-Ref:

Voltage Setting
CPU Voltage:
DRAM Voltage:
Vtt voltage:
NB 1.25V:
SB 1.5V:
SB 1.05V:

[Blacklash]

Looks good.

I will likely pair one of these with my E6320 for rig #2.

[mascaras]

How about listing your settings so we can all enjoy your success! I did the hard part

CPU:E6600 L628B
Memory:TeamGroup 5300 3-3-3-8
Cooling:Watercooled

Ratios/Clocks
CPU Feature: C1E & Vanderpool technology = Disable ( all others enable)
NB Strap Select: 266

DRAM Timing
#1:Auto//Mode3 (try both)
#2:Auto
#3:Fast
#4:Fast
#5:Auto
#6:Auto
#7:Auto


Cas: 4
Trcd: 4
Trp: 4
Tras: 12
Pre-to-Act:3
Trfc: 21
MCH Lat:2
Twr: 11
Twtr: 10
Trrd: 2
Trdwr:8
Twrwr: 6
Trdrd: 6
Twrrd: 5
Trtp: 5
Pre-to-Ref:3

Voltage Setting
CPU Voltage: you guys have to test
DRAM Voltage: 2.1/2.2v/2.3v
Vtt voltage: Default
NB 1.25V: Default till 500FSb // 1.35v for +500FSB
SB 1.5V: Default
SB 1.05V: Default



regards

[kiwi]

No clockgen yet? Where did you buy it from?

I wish I had waited and gotten one of these, my P5N-E SLi can't even do 425 FSB.

Mine did 500

[SeLecT]

Nice tests.... this board seems to be great!

[JWilson]

CPU:E6600 L628B
Memory:TeamGroup 5300 3-3-3-8
Cooling:Watercooled

Ratios/Clocks
CPU Feature: C1E & Vanderpool technology = Disable ( all others enable)
NB Strap Select: 266

DRAM Timing
#1:Auto//Mode3 (try both)
#2:Auto
#3:Fast
#4:Fast
#5:Auto
#6:Auto
#7:Auto


Cas: 4
Trcd: 4
Trp: 4
Tras: 12
Pre-to-Act:3
Trfc: 21
MCH Lat:2
Twr: 11
Twtr: 10
Trrd: 2
Trdwr:8
Twrwr: 6
Trdrd: 6
Twrrd: 5
Trtp: 5
Pre-to-Ref:3

Voltage Setting
CPU Voltage: you guys have to test
DRAM Voltage: 2.1/2.2v
Vtt voltage: Default
NB 1.25V: Default till 500FSb // 1.35v for +500FSB
SB 1.5V: Default
SB 1.05V: Default



regards

Thanks! I'll try her out when I get home....

[mascaras]

No clockgen yet? Where did you buy it from?




Mine did 500

clockgen works with DFI infinity??? what version , you have a link ???


i bought it in Portugal 8 days ago .



regards

[MonkSP]

O Mascaras a dar-lhe! Good job!

I am waiting for DFI 680i LT, then we will talk!

[MADMAX22]

thanks for the settings came in handy, didnt realize that 500fsb was attainable at such low volts but it works

[p4spooky]

Has anyone tested this board with all four memory slots populated? I am interested in knowing if this board will run it and what type of overclock can be expected.

[bloodbanger]

can i use those ram-settings with this memory?

Gskill DDRII 2 x 1GB PC6400 CL4-4-4-12 (F2-6400PHU2-2GBHZ),those black ones?

[burningrave101]

Has anyone tested this board with all four memory slots populated? I am interested in knowing if this board will run it and what type of overclock can be expected.

I'm interested in this as well. I have 4 gigs of Buffalo Firestix DDR2-800 Micron D9 to put in this board. I only have the board and the memory at the moment so I can't test yet.

[Rattle]

my p5b-d does 515 with 1.55 on the NB perfectly rock solid stable but for some reason I just need to have this mobo....

[trans am]

Thanks. I'm going to try mascaras settings next. 4-18 bios

Exactly what is boot up clock? I'm on auto

Here's a few bios screens to show you why I can't boot past this message:

[serialk11r]

I'm eager to get this board...As I see more and more results, I become more and more desperate to get rid of this NF4 joke.
What watercooling do you have?

[The Runner]

looks like this is the board to get, how hard was the overclocking process? Also how does the Corsair 620w modular psu work with this board? I have heard that dfi is very picky about PSU's.

[trans am]

Thanks mascaras for the preliminary settings.

I'm back here running orthos blend @ 3.6ghz
vcore is @ +250.0 in bios and smartguardian reads 1.56v during the orthos test.
pretty sweet!
I gotta get this ram clock up to speed

[mascaras]

I'm eager to get this board...As I see more and more results, I become more and more desperate to get rid of this NF4 joke.
What watercooling do you have?

i have a simple WC Kit


CPU: Nexxos XP silver
PumP : eheim s1000 station
Rad: Airplex Evo 240mm
Fan : 2x 120mm enermax dual ball bearing

Thanks mascaras for the preliminary settings.

I'm back here running orthos blend @ 3.6ghz
vcore is @ +.250 in bios and smartguardian reads 1.56v during the orthos test.
pretty sweet!

thnks trans am , about boot up clock im also run AUTO

Has anyone tested this board with all four memory slots populated? I am interested in knowing if this board will run it and what type of overclock can be expected.

this user is using 4x1Gb and run 472FSb >> http://www.xtremesystems.org/forums/...&postcount=245


regards

[trans am]

I gotta say as far as vdroop goes during load this board is awesome! Its right on point. You could almost say it overvolts by 1v according to smart guardian. this is on the latest beta bios 4-18.

[MADMAX22]

i agree, at lower volts say less then about 1.4-1.45 theres none that i noticed, and once you get to higher like 1.6 or so it sometimes will give me like .02 droop full load

[mascaras]

yep even with high voltage the vdroop its almost the same .


Btw:

trans am i read it now that you say +250.0mv = 1.55v???


in my dfi +200.0mv = 1.40v >>> 1.39v Idle >> 1.37v Full

+250.0mv = 1.45v
+300.0mv = 1.50v


and so on



regards

[screwtech02]

Any chance of getting some Crossfire action with those type of clocks??