all i have to say is to that vdimm
all i have to say is to that vdimm
If with the new BETA bios ABIT has solve the 460MHz wall issue, I think yes....I even try 2.2VMCH but 460MHz wall was there......I'll test with the new BETA bios to see if it's OK now or not...Originally Posted by Hazzan
INTEL PWA FOR EVER
Dr. Who my arss...
.........
One friend bought one retail AW9 max and told me that can do 481fsb with the latest bios but only 461fsb stable fot 1m pi..
When Mercedes brought their C111 to Talledega years ago and blew away the closed course record did it count? Yes..
That was a "factory" car and a "one of" that no one could buy and was never sold.
Records are records and that is a fact so get over it.
Yes I've changed from ASUS P5WDH-Deluxe to ASUS P5B-Deluxe and to ABIT AW9D-MAX with no problem....Install Intel inf firstly....Originally Posted by Pjoeloe
INTEL PWA FOR EVER
Dr. Who my arss...
.........
just curious, have the sticks degraded any after running them at 3.4v so much?
Got a fan over those memory sticks? No? Well get to it before you kill them
thanks, yes, I heard the news also from opb, so that`s greatOriginally Posted by hipro5
Conroe E6600 retail @ 4 Ghz - 1.5v, 48c max
Asus P5B Deluxe
Nvidia 7900GT 512MB superclocked
2*1GB DDR2 667 @ 888 4-4-4
550 W enermax
all air and silent
as far as i know he was playing with 3.5v and the sticks havent been the same since.Originally Posted by ozzimark
HiPro5 PLEASE BY SOME WATER FOR YOUR RAM
http://www.mips-computer.de/sg_WATER..._RAMCOOLER.htm
Hmmmm... P5W64 or AW9DMAX??
Still depends on getting a cherry, though...
My P5W64 stopped at 430.
difficult decision indeed... my MAX maxed out @ 420...
maybe becasue i turn too fast?! hahahaOriginally Posted by hipro5
2.8v direct to can't read (3 turns)! !! i think that is 3.3v but not sure....
i was tring to lower the voltage.....
For who are in doubt about Cellshock 6400 here you have some nice pics:
3-3-3-8:
3-4-4-8:
http://valid.x86-secret.com/show_oc?id=131594
4-4-4-12:
From 3-4-4-8 to 4-4-4-12 only a gain of 3MHz... looks like something is limiting me at 575MHz fsb.
Just a quick 1M Spi test @ 3-4-4-4 with E6600 @ 4683MHz Stock Vapochill LS Cooled:
Vmem used:
Looks like 6400 kits have D9GKX. I dont know because i didnt taked off the heatspreaders but this kit is making same results of my other two Cellshock 8000 CL4 kits.
Vmem @ 2.72v and just one 92mm fan giving them some air and it was cold.
I believe that this babies can go to 600MHz @ 4-4-4-12. Just need to find what is blowing @ 575fsb.
Congratulations Cellshock. This was really mems!
Last edited by Lasac; 10-20-2006 at 06:20 PM.
Conroe E6600 @ 4712.8MHz on VapoLS (+6ºC )
Asus P5B Deluxe wi-fi edition
2x1GB CellShock 8000 CL4 @ 1144MHz 4-4-4-12 2.35v
StockCooled X800GTO with XT bios mod (Sapphire X1900XTX DEAD!)
Enermax Liberty 620W
Western Digital 250GB 16MB 7200 SATA2
Lian-Li PC60
3Dmark01: http://service.futuremark.com/compare?2k1=8959998
very nice lasac
Why dont you use mem dividers?
Here is what chips Cellshock is using according to one of its employees:
Do you have the possibility to test the same sticks on a 975X board?DDR2-800 CL4 - Micron D9GMH
DDR2-1000 CL5 - Micron D9GMH/D9GKX
DDR2-1000 CL4 - Micron D9GKX
Did you buy the stick from a shop or did you request them from Cellshock?
オタク
"Perfection is a state you should always try to attain, yet one you can never reach." - me =)
Buy them at shop.
I know that Cellshock have D9GMH on 6400 sticks but these 6400 sticks performs like D9GKX.
When I have more time i will fully test them.
Conroe E6600 @ 4712.8MHz on VapoLS (+6ºC )
Asus P5B Deluxe wi-fi edition
2x1GB CellShock 8000 CL4 @ 1144MHz 4-4-4-12 2.35v
StockCooled X800GTO with XT bios mod (Sapphire X1900XTX DEAD!)
Enermax Liberty 620W
Western Digital 250GB 16MB 7200 SATA2
Lian-Li PC60
3Dmark01: http://service.futuremark.com/compare?2k1=8959998
Now some tests with low voltage:
4-4-4-12:
http://valid.x86-secret.com/show_oc?id=131854
3-4-4-4:
http://valid.x86-secret.com/show_oc?id=131894
3-3-3-8:
http://valid.x86-secret.com/show_oc?id=131899
3-3-3-1:
http://valid.x86-secret.com/show_oc?id=131898
Tomorrow i'll try to spend some time trying higher mem multi to discover the max fsb @ 4-4-4-12 2.72v
Conroe E6600 @ 4712.8MHz on VapoLS (+6ºC )
Asus P5B Deluxe wi-fi edition
2x1GB CellShock 8000 CL4 @ 1144MHz 4-4-4-12 2.35v
StockCooled X800GTO with XT bios mod (Sapphire X1900XTX DEAD!)
Enermax Liberty 620W
Western Digital 250GB 16MB 7200 SATA2
Lian-Li PC60
3Dmark01: http://service.futuremark.com/compare?2k1=8959998
I have finally found some DDR2 that I really want but its as rare as hens teeth in AU
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
you can also find some GKX on 800
lets call it special-christmas edition (or whatever you like)... watch out for batch: 1.09196.95.360 and 1.09256.97.360
Last edited by Bluebeard; 11-15-2006 at 03:44 AM.
Alonso why not have a Cellshock support forums here there are many cellshock users on XSOriginally Posted by Alonso
plse give us some more time - until then i will do my best to support you as good as i can in the specific threads
Bookmarks