E6600 @ 4.5g (di)

[OC_Windforce]

M'd : Intel 975XBX "Bad Axe" (Vcore,Vdimm,VNB,Vfsb,Tcore MOD)
CPU : E6600
RAM : F2-6400PHU2-2GBHZ (Micron D9GMH)
RAM Cooler : Delta FAN 80mm * 2EA 4000rpm
Copper-Pot : amdmania.com LN2/DI Container
Duel PSU : [Main]Antec NEO 480W(3.3V Rail MOD) / [Sub] Antec True 550W
VGA : 7900GT (Vgpu,Vgram MOD)
HDD : Samsung 250G * 2EA (RAID0)
O/S : 2003



1333 strap
<img src="http://blog.empas.com/freeman2580/25560989_800x870.jpg">

1333 strap
<img src="http://blog.empas.com/freeman2580/25560988_800x853.jpg">
http://blog.empas.com/freeman2580/25560991_800x888.jpg
http://blog.empas.com/freeman2580/25560992_800x931.jpg
http://blog.empas.com/freeman2580/25560990_800x839.jpg



1066 strap (I think bad axe [1066]FSB limit )
<img src="http://blog.empas.com/freeman2580/25560987_800x863.jpg">


1066 strap
<img src="http://blog.empas.com/freeman2580/25560986_800x856.jpg">

[Absolute_0]

Very nice, 4.5g on a 6600, and a retail no less. Once again disproving that they are worse.

Also the 500 FSB is great

[SoF]

what a nice 6600 run - very good clocks Hopefully more people show such 6600 - effortable power
Show us 3D's pls

[OC_Windforce]

Very nice, 4.5g on a 6600, and a retail no less. Once again disproving that they are worse.

Also the 500 FSB is great

thx
have a nice day

[OC_Windforce]

what a nice 6600 run - very good clocks Hopefully more people show such 6600 - effortable power
Show us 3D's pls

thx
sorry DI pot disassembly


CPU water cooling (3D)result ->
http://service.futuremark.com/compare?3dm05=2133852

[Moonraker™]

I always wish the people with these awesome scores would post a pic of their rig as well. Just to see their setup. Coolaler doesn it now and then.

Do u have a pic Windforce?

[LarsK]

Excellent results. Crazy fsb. Congrats

How much "juice" are you giving particularly the chipset (mch) and the cpu to reach those speeds?

I'm 24/7 stable @ 3.9 Ghz with single stage, but my D975XBX won't go any further than ~435 Mhz stably without Vmods.

Also did you check what cpu temps you had in bios? Mine's sitting at -28 C @ 3.9 Ghz and 1.600V (1.558V real) with the mach II GT

[M.Beier]

#7
Lars, duo Vmch or Vcore? (the 335FSB limit)

[OC_Windforce]

Vcore : 1.68V
VMCH : 2.2V

[[cTx]Philosophy]

Impressive to see some 6600 action, this would be the chip of my choice if I was to join the dark side..

[OMEGA3]

Nice work!!　OC_Windforce-san

Your board is also quite good too.
FSB478.1 with 1066strap...it's fine truely.

My 303 is till 420.2 at Vmch1.90V.
Would be try also raises to 2.2V.

[OC_Windforce]

Nice work!!　OC_Windforce-san

Your board is also quite good too.
FSB478.1 with 1066strap...it's fine truely.

My 303 is till 420.2 at Vmch1.90V.
Would be try also raises to 2.2V.

Very thx
2.0V From the FSB increased plentifully.

Have a nice day~!

[LarsK]

Vcore : 1.68V
VMCH : 2.2V

Thanks.

[guess2098]

this is a nice OC for E6600
good job

[lowfat]

Nice FSB there, what were you using for the NB cooling? Just the stock sink?

[M.Beier]

Vcore : 1.68V
VMCH : 2.2V

Odd these E6600 seems to have hotspot around 1.675-1.68v... 2.2vmch is very high though... :|

X6800 takes 1.9v easily, right?

[bachus_anonym]

Yay, 473Mhz on 1066fsb strap and 2GB That's something, seriously! Not mentioning, 4.5GHz on E6600 is very impressive! You're the 2nd person I've seen to acomplish that, afier sierra_bound... Btw, what vdimm on 2GBHZ ?
Congrats

[OC_Windforce]

Nice FSB there, what were you using for the NB cooling? Just the stock sink?

Stock sink on the 70mm fan air cooling.

[anarinsk]

Nice results! Up to higher!

[OC_Windforce]

Nice results! Up to higher!

Thank you .
A cat is lovely.

[Stoolman]

Thats some nice work there!Personally i can not get my Intel mobo to do anything extreme... but you do!!

[BigSteve]

Outstanding.

I have the same CPU and stepping, and the same memory, but have the Gigabyte DQ6 motherboard (965 chipset obviously). It will be interesting to see how I do, having changed that one small variable... Hope to get some time this weekend to try.

What speed can you boot into the OS at?

What temperatures are you getting?

[OC_Windforce]

Outstanding.

I have the same CPU and stepping, and the same memory, but have the Gigabyte DQ6 motherboard (965 chipset obviously). It will be interesting to see how I do, having changed that one small variable... Hope to get some time this weekend to try.

What speed can you boot into the OS at?

What temperatures are you getting?

-> 2003

-> Measured point : Pot bottom side
Idle : -64
Full : -60

[Pipi]

I always wish the people with these awesome scores would post a pic of their rig as well. Just to see their setup. Coolaler doesn it now and then.

Do u have a pic Windforce?

Same here. There's just something about seeing xtreme rigs. Dunno what tho

Nice E6600 BTW.

[BigSteve]

-> 2003

-> Measured point : Pot bottom side
Idle : -64
Full : -60

A block of dry ice has a surface temperature of -109.3 degrees Fahrenheit (-78.5 degrees C). So those must be Celsius.

Listen, I am just not set up for DICE so I will shut up now. Just a couple parting questions: do you boot 2003 at 4.5g or boot at 3.0g and then tweak?

And, in your experience, is there any way to correlate or guess how a system will do with phase or water or air based on the results you punch through with extreme clocking with dry ice?