ASUS P5W DH mods & E6700@4G by water-cooling

**Haltech** · 07-03-2006, 04:57 PM

Originally Posted by Lestat

its one of the big reasons why i dispize(sp) asus. not only do you need volt mods to make their highest price boards run the way they should be out of the box you also need to droop mod them.
this board doesnt seem to require a volt mod although im still seeing people report 0.05v droop which is just retarded.

personally i ordered it from ewiz simply for a placeholder until dfi brings their lanparty series to the scene.
and now that ewiz and their non updating website caused many people to have their orders cancelled im glad i missed out on their stock.
i think im going to wait until a proper board comes out.

Thats going to be a long wait until the DFI comes out bro... Im sure ill find someone to buy this Asus when it comes time to dump it for RD600

**Lestat** · 07-03-2006, 05:06 PM

i know thats why i chose the asus as a placeholder.
even if i dont get it. i can wait
im still having fun with my #3 record Celeron D (according to CPU-Z search i am #3) and thats even after Proth vdroop'd the P4C and it was a failed mod. and then he refuses to reply to any of my requests for a proper vdroop mod.(which to me is the most unprofessional thing someone can do, i paid for a droop mod and got a pot that doesnt work or he inadvertantly used a very low resistance pot.. it still droops badly, he did admit that he didnt even test it which i thought was unprofessional too)

i had 3 -E Premium boards all three of which drooped 0.05 to 0.07. and i swore off asus.
at this time the Axe and the P5W are our only options, and with the Axe i dont like a $280 baord that you still have to use friggin clockgen with, that and its goofy bios.

but kyosen very wicked results. i truly wish i had the skill you do in doing these mods, shakey hands and having to use a macro lense off of a camera to see those small points really sucks for soldering hehehe.

i can wait, i got other toys to consume my time. and some more xbox's and 360's to mod.

**Haltech** · 07-03-2006, 05:46 PM

Well theres still hope.. The MSI Plat Diamond REV 2B and the Gigabyte. Im not a fan of Asus boards at all, but they will be in a better position when conroe releases with a more mature bios for em. I can deal with an Asus until the DFi releases.

**principino1984** · 07-09-2006, 02:52 AM

I can't see the vmod pictures anymore, would some one please give me the correct link please?

Thanks

Marco

**kyosen** · 07-09-2006, 04:40 AM

Originally Posted by principino1984

I can't see the vmod pictures anymore, would some one please give me the correct link please?

Thanks

Marco

Sorry, IP address of my server(router) has changed.
Now I'm staying at my parents' home,
so I'll edit the article tomorrow

**Extera** · 07-13-2006, 10:49 PM

Nice mods

(just copied them all so I can do them on my board soon)

Does anyone has a VCore messure point for me?

symphy · 07-15-2006, 04:42 PM

Originally Posted by Extera

Does anyone has a VCore messure point for me?

I've my board right here, but no CPU yet.
Just a guess: try the SMD the black cable is soldered at?

Tell my if it works, i need that point, too...

And... don't burn your board with the MM while testing

**Stelios** · 07-17-2006, 04:01 PM

Is there a Southbridge volt mod ?? I would like to try more than 1.20V .
Also ... Vio is the 3.3V line . Right ? (http://www.xtremesystems.org/forums/...3&postcount=19)

**sierra_bound** · 07-19-2006, 09:25 AM

kyosen reaches 4139MHz with watercooled E6700 and P5W DH. Looks like he also did some lapping of the IHS.

M/B: ASUS P5W DH Deluxe, BIOS: 0078
CPU: Conroe E6700 ES
CPU Cooling: Alphacool NexXxoS XP Silver
Chipset(MCH) Cooling: Alphacool NexXxoS NBX-i2
Chipset(ICH) Cooling: Small fan
Memory: Corsair XMS2-6400C3(v1.1) 1GB x2
VGA: RivaTNT2 32MB/PCI
HDD: WesternDigital Raptor WD740GD
Power Supply: Zippy-600GE
Vcore: 1.647V, Vdimm: 2.823V, Vio: 3.423V,
Vmch: 1.950V, Vfsb: 1.608V
OS: Windows Server 2003 Enterprise

**tanghiro** · 07-29-2006, 07:27 AM

Originally Posted by AndreYang

Who can help me mod ASUS P5B Deluxe?

For Vdimm and Vmch, it is same logic as P5W DH, except the location of RT9214.
The location is just near by CHA-Fan4 for mch and Near by CHA-Fan5 for Vdimm.
But, without the modification, my P5B Deluxe can boot into widows at FSB 492.

**Kabauterman** · 08-03-2006, 03:01 AM

The Pics are Down but i need this today can someone they attech on his Post

**over@locker886** · 08-05-2006, 11:48 AM

Originally Posted by Kabauterman

The Pics are Down but i need this today can someone they attech on his Post

Me too, need!

Please update kyosen!

**M.Beier** · 08-05-2006, 05:25 PM

Kyosen-san, thanks

You need to update the pictures, but It works in that other thread still..

One thing I wonder though...
Vdroop?
What does that do exactly?

I dont know if I will have the vcore mod done, its... Well.. 1.7v is nearly enough, 1.9v is max on LN2 // cascade, and Im gonna use some phasechange, so I figured 1.75-1.8v might be nice.. :\

**Nosfer@tu** · 08-08-2006, 03:14 AM

Originally Posted by M.Beier

Kyosen-san, thanks

You need to update the pictures, but It works in that other thread still..

One thing I wonder though...
Vdroop?
What does that do exactly?

I dont know if I will have the vcore mod done, its... Well.. 1.7v is nearly enough, 1.9v is max on LN2 // cascade, and Im gonna use some phasechange, so I figured 1.75-1.8v might be nice.. :\

Vdroop is to stabalise Vcore.

Vdimm: 2.823V, Vio: 3.423V

How High Can the motherboard go for Vdimm without dying?

Vio??? What is that

**zbogorgon** · 08-10-2006, 10:55 AM

kyosen or anybody, how much is VR resistence set for vdrop ? 50k?

**SteveS** · 08-10-2006, 11:47 AM

Great Work, I wish I had the skill to do something like that.
But I cant solder to save my life.

As you can see in My Sig, I am waiting on my 6700. I have water cooling what sort of speeds can I expect to get with the set up I have?

**mion** · 08-11-2006, 08:47 PM

Is threre a way to do vdroop without removing resistor from the board?

**VL125** · 08-12-2006, 04:07 PM

simple question.

My VmCh-mod drops between 1,51 and 1,61. whats wrong...? And it´s suddenly freezing and than i´ve got a fade to black.

**Kabauterman** · 08-13-2006, 12:28 PM

hey guys,

it is maybe that the Vdroop is very big on the board, with using a Retail E6600 ?

My droop is around 0,02 to 0,04 aber the BIOS setted Voltage esp. 1,7 V (with my SS) comes as 1,66 to the CPU and under Load its get down to 1,62 - 1,63

**sl4ck** · 08-21-2006, 09:29 AM

Anyone knows P5W DH Pencil Vdroop Mod?

I need it!

**sl4ck** · 08-22-2006, 03:29 PM

Originally Posted by sl4ck

Anyone knows P5W DH Pencil Vdroop Mod?

I need it!

No one?

**caater** · 08-22-2006, 03:52 PM

Originally Posted by sl4ck

Anyone knows P5W DH Pencil Vdroop Mod?

I need it!

if i'm not wrong you could pencil the very same resistor mentioned at the start of this thread (50k one).
but then again i could be wrong.

**sl4ck** · 08-24-2006, 05:04 AM

Originally Posted by caater

if i'm not wrong you could pencil the very same resistor mentioned at the start of this thread (50k one).
but then again i could be wrong.

Thx

Could someone confirm that?

**Extera** · 08-24-2006, 05:14 AM

Thanks for the mods kyosen

I think there on well.
Only Vcore monitoring is not working. A well, got AI Booster for that.

*clickable

**Stigma** · 08-26-2006, 06:23 PM

SOrry, maybye I'm being stupid here, but I can't figure out the MCH voltmod (the only one I really care about atm). All the points marked aren't connect to anything. Is it the RT9214 that controls the MCH? if so, what are the points marked as MCH? Also, how do I measure how much voltage I am actually getting? I assume I don't have to "fly blind".

Can anyone spoonfeed me this one? *shame*

-Stigma

Thread: ASUS P5W DH mods & E6700@4G by water-cooling

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions