UCCC 1GBX2
DDR580 3-4-4-8 32M Done
UCCC 1GBX2
DDR580 3-4-4-8 32M Done
Andre, is that higher/lower/the same as your previous board?
Originally Posted by tsuehpsyde
TCCD lower , UCCC the same , I try BH5 , CE5, BE5 now.
No video card(s)
Thats kinda ironic for someone testing this board at this point. I think DFI needs to arrange for you a CF setup for more in-depth testing
Originally Posted by G H Z
sorry , 3D test is not my job. I only help Oskar Wu to test all kinds of Rams.
Can you plug ur matrox into the top slot to see if it works? I dont want to waste any PCI slots by plugging a vidcard into the bottom slot.
Asus Rampage Formula X48
Intel Q9650 @ 4.33GHZ
OCZ Platinum DDR2-800
Palit 4870x2
Creative Xi-Fi Extreme Music
Corsair HX1000
LL 343B Case
Thermochill 120.3
2xMCP355
KL 350AT
KL 4870X2 FC WB
DD Chipset Block
"DIMM 1/3 & 2/4 Timming Skew" - What is that for? 4 DIMM configs?
Thanks for your preview, Andre
Originally Posted by bachus_anonym
Orange slot Dimm 2/4............
I am not testing 4 dimm yet. Maybe I need few days.
BH5 512MBX2
DDR546 2-2-2-5 3.85V 32M
You can control the skew on each bank independently BachusOriginally Posted by bachus_anonym
Meaning you can delay the signal to the closest bank to the CPU and advance the farther bank to balance and tune.
Niceee I was kind of wondering it could be it, hehe. Thanks for stepping inOriginally Posted by RyderOCZ
Looks like a nice board, but I am really excited for 975X
Clock Timing Skew is the most important for Memory.
I suggest Delay 300ps~700ps is perfect.
1/3 2/4 are the same.
Last edited by AndreYang; 06-02-2006 at 02:03 PM.
Infineon Old CE5 chip 1GBX2
DDR540 2.5-3-2-0 1GBX2 32M
Last edited by AndreYang; 06-02-2006 at 02:03 PM.
Who moaned? I mearely stated an observation/fact.Originally Posted by Tony
Tony with all due respet your coming across a little harsh with this whole DFI nf4 motherboard thing. Not everyone is "in the know" like you, and none of this information has ever been "officially" stated by DFI. How is the average or even high end consumer supposed to know that their expert wasn't "designed" for TCCD?
Sorry for the Off Topic.
Nice looking board/review Andre, I always enjoy your post.
Last edited by TheMeatFrog; 03-29-2006 at 07:30 PM.
Me too, Andre's posts are always great.Originally Posted by TheMeatFrog
Originally Posted by thunderstruck!
Thanks a lot.
4 Dimm is more interesting with you. Because 512*4 DDR 640 2.5-3-3-6.
4 Dimm 512MBX4 TCCD 2T DDR640 2.5-3-3-6
Last edited by AndreYang; 06-02-2006 at 02:03 PM.
Andre, how does this board compare with Venus so far?
Formerly XIP, now just P.
Originally Posted by EnJoY
If you use SLI , you could be chosen Venus. But RD580 4Dimm is better than any DFI motherboard.
NF4 32M 3G is still faster than RD580 about 5~8 sec.
Wow, I'm quite impressed. I was considering sticking with my Ultra-D AD0 until AM2, but I might have to reconsider.Originally Posted by AndreYang
Formerly XIP, now just P.
I'm more interested in the i975 lol... but this still looks sweet.
The Rig
DFI Lanparty UT Nf4 SLI DR
Athlon 64 3500+
1 Gig OCZ VX DDR500
BFG GeForce 7800GT
160 Gig SATA HDD
CD-RW DVD-ROM Drive
Antec NeoPower
Thermaltake Tsunami
Originally Posted by EnJoY
I told you one news.
DFI AM2 will have RD580+SB600.....
Bookmarks