Search:

Then we'll just have to strike it up as one of those things that will probably drive you nuts trying to figure it out. You have your GOW, I have my COH:LOL: Drivers will get better, just takes time...

Maybe I am less affected cuz I am on quadruple raid and levels and stuff load very fast for me(4x75Mb)?

Now I played till the chopper lands and that general guy starts telling me he has a weapon that will kill all these suckers at once where they live, I do notice occasional framedrops but its not...

When I started GOW the installer referred me to this link,

http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=18499035-f799-4f93-bb3c-db70e22e1c1e

its for 64bit version of...

yeah I have GOW, not installad though but I can check, PM me a savegame where you get your lag(cuz I never actually installed the game so I can't really step into the action immediately):ROTF:

Yep, its so true, I went even further, now I put everything on the highest possible setting, I turned on AA, and I put it on,

16XQ CSAA@1920x1200@all high/ultra

and the game still plays smooth...

Update : After extensive testing I will have to agree with cadaveca, its most definitely a DX10 issue, I just tried company of heroes on DX9 on a map with heavy rain(these maps are extremely cpu/gpu...

I think this whole thing has to do with drivers cuz when I installed the XG tweaked drivers(XTreme-G_174.74_Vista_64bit)I did notice a big difference compared to the 174.74_WHQL drivers from nvidia....

Well if I test at DX9 I too have no lag whatsoever but whats the point, this card should handle the load:LOL:

Okay I have the XFX 9800GX2 and for my test subject I am using the game Company of Heroes. I read alot of reviews of how the 9800GX2 handles this game and I'm thinking, wow. Just take a look at this...

Aaah ok thnx for the heads up!

I see that the 9800GX2 uses an internal SLI setup and my motherboard is the Asus P5B Deluxe(which isn't an SLI board). So question is, am I now screwed and am I losing performance that I could have...

Unfortunately the PCP&C psu's aren't very mainstream in europe, hard to find them and if you do the prices are allways too high(sometimes double the price in the US).

But no worries, I made my...

I decided to go for the Coolermaster real power M850, its modular and the price is also within my range and it has 2 of them 8-pin plugs and the required sata cables I need(I have quad raid and other...

I am about to buy a 9800GX2 card and I saw that these cards need a 6-pin and an 8-pin PCI-e connector. Now my current PSU is just crap and its only 600W and doesn't even have the required minimum of...

We all know about the hot temps on these E8400's right, oK what I did was the following, I was messing all day yesterday, why in gods name this thing was running so hot, it showed 55-59°C idle, now I...

Ja das echt balen he, dus wat zou jij doen Leeghoofd, gewoon op 3.8Ghz laten staan dan, of stiekem proberen naar 4.0ghz met ietsje hoger volt. Is 1.4v echt zo slecht voor deze chips, mijn E6300 die...

I have following voltages set,

memory voltage 2.25v(corsair dominator and it needs 2.2v standard)
CPU Core Voltahe 1.375v
FSB Termination Voltage 1.3v
NB Vcore 1.45v
SB Vcore 1.50v
ICH...

two intake fans, one exhaust, all of them 120mm, case is CM stacker.

Ok will look for that Mx-2, is there a good way to put on paste, I allways put a small dab right smack in the middle after which I seat my sink, is that good? I also read that some people apply...

FPO : Q746A517

Mine won't do 3.6 without giving atleast 1.375v:(

Well when I go into bios it says my temperature of the CPU is 40°C, is that the figure I should believe then?? I don't think I have seated my sink wrong cuz it works with screws with springs, there's...

http://i29.tinypic.com/dyadfo.jpg

as you can see its priming on both cores, voltage I have set in bios at 1.3875v. I find this a flipping high temperature or do these chips just run hot as hell???...

https://www.pacificgeek.com/product.asp?id=48755&c=211&s=1047

a friend of mine has this crappy board and he wants to buy an E6400, could anyone here tell me if its gonna work?

Thnx muchos:up:

You could try www.komplett.co.uk they'r pretty good and have an all around european storebase(norway, denmark, belgium, holland, etc). As for the amount of ram, if you really like your parring to go...