Oh, finally you've done, congratz:up:
With just LN2 and low voltage...very awesome and promising:yepp:
Type: Posts; User: kyosen; Keyword(s):
Oh, finally you've done, congratz:up:
With just LN2 and low voltage...very awesome and promising:yepp:
Congratz, massmann:clap:
High NB clock is efficient, helpful, indeed:yepp:
My latest results(sorry in japanese) on last Sunday...
...I forgot to try PiFast, so I'll follow you in next time:)
Nice kicking start, Sampsa/SF3D:up:
You've exceeded 0.001s than me again...I got 14.141s last Sunday:D
My guess is 6.25G~ for SP1M U11 with Deneb...
BTW, I also tried 3DMark05, and reached 40075...
0.001s difference!?...don't be kidding, Sampsa:)
Now I've reached 11.156s...
...I could even observe 11.125s, but failed to get the screenshot:(
I found that NB 4.5G is also available for mine...
NB 4.5G:eek:
...great work, really promising results:)
NB 4320MHz is my best so far, but I couldn't get 8M run at this NB speed:(
And...I have no backup result, still these are my best......
A HAPPY NEW YEAR:)
Yeah I already mentioned it in my first post.
Publicly, I/we know only one ES CPU which has different pin layout compared to AM2.
It might be an ES of AM3 CPU, but I/we...
I attached a captured image from Molex's AM3 datasheet.
I added 2 red lines just for convinience...look carefully...
The approved date of Molex's datasheet is very old (2005/03/23),
but the socket...
I've just noticed the Molex's AM3 socket datasheet:
http://www.molex.com/pdm_docs/sd/470998141_sd.pdf
Look the page 2.
It shows that socket AM3 has 941 holes apparently.
extra 1 hole might not be...
I'm playing with Nehalem/Core i7 recently, and noticed the MSR register
for determining the multiplier of each core on CPU-Z's Regsiters Dump.
I changed the register values with MSR Editor of...
Now we can change multiplier and Vcore ID of Penryn family CPU
with hiyohiyo's CrystalCPUID on Windows:)
hiyohiyo's site:
http://crystalmark.info/?lang=en
and get "CrystalCPUID 4.14.1.403...
My results...just with air or water cooling.
CineBench10 @ 2.9G=253x11, with NB x8:
http://222.151.146.125/c-board/file/Phenom9600_2907.3_CB10.png
also SP1M @ 2.9G=253x11, with NB x8:...
I'm playing with DFI 790FX and Phenom9500.
DFI 790FX has BIOS setting for NB multiplier(needed BIOS uptdate to R7LDB22):up:
HyperTransport base clock limit is ~245 or so, at least for my own...
CPU is safe, still alive:)
Just mobo is dead...
...one night removal of CMOS backup battery can't help her:shrug:
I tried Vcore&Vnb mods, and got 2.6G@Vcore=1.38V, Vnb=1.35V.
I pushed it further, and saw 2.67G SuperPI1M run and then,
the system freezed...it's dead as prepared for arrival of Intel 45nm:hitself:...
I connected wire from ADP3186 Pin#8 FB to GND with 50k-ohm VR.
http://www.oohashi.jp/c-board/file/L1N64-SLI_Vcore-mod.jpg
I could reach 2.6G@1.36V with water-cooling(no air-conditioner assisted)....
No, I'm running my board with 1GB Reg. memory modules.
I tried 2x 2350 and 4x = 2x + 2x memory modules in this morinng.
My 1GB modules is 1 rank(bank) type, so it looks that bank-interleave is...
I received the BIOS from metro.cl, many thanks!!!
And now, my L1N64-SLI has booted up with s7e9h3n's 2350(B1):up:
L1N64-SLI has no support for DDPM/split power plane,
so there is no NorthBridge...
Though CPU-Z shows single channel,
it also shows that D(ram)C(ontroller) Mode is unganged.
Ganged and unganged is still not familiar terms,
but 2 or more memory modules are running in unganged...
~5% performance gain from K8 to K10 is based on my own results about SuperPI4M run.
I don't know whether the gain is same or not for both SuperPI and F@H, at this moment.
My intention of previous...
Just quick guesstimation:
my result: 15m24s=924s for each 5000 steps with 2.0G x4 cores K10 Optreon
your score: 15m24s + 6m = 1284s with 2.8G x2 cores K8 Optreon
So, 1284/x * 2.8/2.0 /y = 924...
Yes, check the time stamps please...7% screenshot is just later status of 2% screenshot.
Hello SP33DFR34K,
I tried it and post in my thread:
http://www.xtremesystems.org/forums/showpost.php?p=2539229&postcount=324
And another screenshot at 2% steps:...
CPU-Z latest beta screenshot
Now it can treat each core clock...we can select the core with mouse right-click.
And it also shows Core VID:)...
You are welcome:)
And indiana_74, I've just read your private mail...give a moment;)
You should choose proper word:cool: