haven't you posted that once you bow the block it will not go flat again? if that's the case, I don't see how disassembling it will make it flat. That or bowing the block while assembled is not...
Type: Posts; User: cdelong; Keyword(s):
haven't you posted that once you bow the block it will not go flat again? if that's the case, I don't see how disassembling it will make it flat. That or bowing the block while assembled is not...
where did you get the nozzles? Thanks ;)
guess not??
I just put as thin a layer as I can over 75% of the IHS. My temps are killer!
You can't rely on an even spread every time with a grain sized dot or a thin line over the center of the cores. ...
FuZion.... lap the IHS. The 1250 has more than enough ass to keep your rig happy for a while longer, but a D5 should be in the works shortly after. Sell your old stuff and buy both components at...
Is G.Skill still in the house?
what tests are you using to evaluate performance?
you should be able to run 450fsb, 1:1 (DDR2-900) @ 4-4-4-12 with 2.3v. Give 'em a little voltage man!
Personally I'd lap the 6600 and bow your choice of WB's. The goal is to keep the contact patch right over the core.
I've been playing with this HZ kit for a few days now... not really seeing a difference between 4-4-4-12-10-10-10-10 running a 440x8, 1:1, or 425x8, 5-5-5-15-10-10-10, 4:5 (w/ DDR2-1066mhz ). Both @...
You can't have the O-ring against the base directly. It will be interfering with flow through the pins. It must go between the inlet plate and the mid plate. The bow will transfer through the mid...
Yes, EK O-ring on the top inlet...... IHS is lapped down to 1500 grit with w/d paper. It's not a mirror finish, but it doesn't need to be. It just needs to be flat ;)
Idle is now 34-35C on both...
I tried the EK o-ring on my FuZion..... SWEET!! Dropped me a good 3-4C right on rebooting. Ceramique is not even cured yet!!
the 5v rail is fine in the bios and Asus PC Probe. I imagine it is just the newer bios. I tweaked the MBM custom voltage to match my bios/PC probe at 5.02v. I had to change the *1.57 to *1.88 and...
Had to RMA my board (P5B Deluxe v1.03G) to newegg and just got my replacement today. This board has 1004 Bios vs. 0804 on my old board.
MBM5 has my 5.0v line at 4.22v? Any ideas?? Everything...
:toast:
Once the air is gone things will be much quieter. Since there is already air in the system you are getting a heavy amount of cavation caused by the pressure drop in the block. It is loud compared...
No fan controller for me. I use the Sunbeam Fan Port linked in my first post. That supplies a straight 12v for up to 6 fans..... perfect for you. The port makes for a clean installation as well;) ...
I would not in any way, shape, or form, place a sleeve bushing fan on my high end watercooling rig....... the life expectancy is less than 1/3 to 1/5th of a bearing style fan.
I know most people...
nail polish remover (acetone), or brake/carb cleaner.
Acronis is the best out there...... not free, but cheap;) It will clone your origianl drive to any other drive.... formatted/partitioned or not.
From start to finish it takes about 10 minutes to...
same studs can be used with Fuzion and MP-05.... I have both blocks. The Fuzion just has different springs and inserts that go inside them.
best so far in XP Pro for me:D .... and I've tried many.
Go to AT under the software forum... consolidated security thread (stickied at the top). There are tons of options there and pro/cons of...
www.virtualrc.com
it's a sim game for real RC car racing..... the tracks are exact replicates of real tracks around the USA/World.
I'm practicing for the US WinterNationals in Ft. Myer's in...
I have my desktop set to 1920x1200 and a particular game I have will only launch at a max of 1280x1024. I have set the dispaly settings to have the resolution controlled by gaming applications, but...