Update on where I have got to now.
Some new good quality braid arrived for my PCIe Cables taken a long while to find a blue that is suitable colour and quality....
Type: Posts; User: Darkninja462; Keyword(s):
Update on where I have got to now.
Some new good quality braid arrived for my PCIe Cables taken a long while to find a blue that is suitable colour and quality....
Little bit of an update as I haven't posted anything for a while, some good news got a new motherboard, cpu and ram pictures to come as they all arrive.
Regards
-Ninja
So do I just awaiting last parts and I really want to finish it before I go back to uni, it must be done haha :D
Regards
-Ninja
Hello I am nearing the completion of my build log and I am undecided on how to place my tubing for my loops
Attached are two images, one shows two Liang DCC pumps + res; from this you can see...
Well a lot of things have come up in the past weeks some of them lifechanging for me, so this project was slightly set aside. I have managed to fully braid the pumps and awaiting the correct fittings...
Can you tell me what look like 3 wire black clips that your using in this picture, also roughly where there located:
http://i18.photobucket.com/albums/b110/tulcakelume/PCA77F/gpusleeving3.jpg
...
On the build note, have moved quite a few things from my old case into there new home, just made an order of new shiny fittings and braid so I can finish some things off before they are put in. Will...
Well if the price is right I might just do that ;)
On another tantalising note just photographed everything that came back from the powder coaters :D
...
Well just received my case back via "Dad-Express" and it looks amazing quality is outstanding and price was awesome, so here as a teaser:
...
Take two of creating a custom PCB was a success so I now have completed this, the following images show steps during the process.
The etched PCB then sanded to remove the protective coating:...
Haven't updated on this project for a while, due to fact my first attempt of making the circuit board to be a failure as the tracks didn't come out properly. So had to get some more materials, due to...
Today's work consisted of entirely cable management in all ~4 hours of it, I had to modify the existing 2" x 2" square tube, so that between the mid-plates wires could pass through it.
I then...
Today's update, after completing the lightbox prototype, I set about cutting the holes in the top of the bottom mid-plate so that the light is case upon the motherboard, so after a 2 hour cutting...
In this post I will show some pictures of more new hardware, a long with a prototype light box I'm trying to make this uses 10mm Frosted Acrylic currently with a 5mm gloss acrylic underneath to...
Here are a few images of some things that will be going into this build soon/later on.
Silverstone Hot-swap HDD cage:
http://farm9.staticflickr.com/8286/7773735602_d9534263b2.jpg
Unfortunately I...
Wire Management Instillation , I will be hiding all the wires in a central column within the case, this means that they won't be seen until they are used throughout the case, this will use a 2" x 2"...
Final Pictures of the drive bay fascia installed:
http://farm9.staticflickr.com/8433/7644328524_2137519df9_c.jpg
Regards
-Ninja
Cutting of the 5.25" Drive Bays
You will also see that I have lost the blue wrap to the aluminium and masked everything up, this is just because the blue wrap was falling off and I wanted...
I have scratch built myself a case, which has three main sections. the PSU is mounted within the bottom section with W/C, then main hardware next level and finally storage up top.
I am getting...
Everybody loves pictures so this is what this post will all be about, the following images will show the current state as of this morning which the case is in.
...
This is truly awesome clarified some stuff my own build to about lighting etc and just build quality is immense, read through everything from start to finish :)
Regards
-Ninja
The time has come to update Xtreme Systems Forum with the details of the build I know I said I would have updated it a very long time ago now however I have my reasons but now is not the time to go...
Are there certain regulations for HDD cages in custom cages. Is there a place to find the exact measurements ? I am just in the process of designing my own racks for my case.
Regards
-Ninja
I have recently purchased an Evga GTX 570 Classified and to me it seems to get too hot for my licking (80/90'dc). I had a loop for my previous gfx (Evga 9800GTX+ SSC) so the equipment is there, what...
Hello there, I am not sure what this problem is I will be playing the game fine then it will suddenly minimize on me and not recover, I monitored my temps with evga precision, and it seems to max out...