Search:

Type: Posts; User: geforce man; Keyword(s):

Page 1 of 11 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    6
    Views
    10,381

    Copy that I'll give it a shot !!

    Copy that I'll give it a shot !!
  2. Replies
    6
    Views
    10,381

    hx 850 12v rail dropping to 11.75?

    Is this acceptable? or not? I do not have any idea where any of my purchasing paperwork is for the PSU, so an RMA may be difficult if not impossible :(. It will read 12.09 on the 12v rail in windows,...
  3. I would almost blame high vdimm over core. With...

    I would almost blame high vdimm over core. With the mem controller on chip you may be killing it that way. I'd never go above 1.55 on the dimm on these. People killed nehalems at 1.7+, and...
  4. You can throw 7970 bios on these cards? Or are...

    You can throw 7970 bios on these cards? Or are you talking about a 7950.

    Thanks! - Michael
  5. Well remember that these cut down tahiti's are...

    Well remember that these cut down tahiti's are 256 mem bus, and come stock clocked @ 1500. Your 7950 is 384 bit, resulting in much higher mem bandwidth. I think i've decided to keep this little guy...
  6. Created some profiles, modified some XLS files,...

    Created some profiles, modified some XLS files, and I can force it to run at the clocks I want, and its perfectly stable. It's stupid that software is messing these up. Essentially it can run @...
  7. At this point I am debating returning the card,...

    At this point I am debating returning the card, seeing as it can't even run boost clocks out of the box. Is it a driver issue? or is there actually something wrong with the card. I'd love to hear...
  8. Turns out I can't even run 975mhz with +20% in...

    Turns out I can't even run 975mhz with +20% in the CCC. If I open up trixx and lower the voltage i can but that seems like a really annoying solution. With voltage lowered it passed a 2k11 run at...
  9. Yeesh, just checked and apparently the ASIC on...

    Yeesh, just checked and apparently the ASIC on mine is 61%? Seems terrible :) How do you keep these things from switching from overclock to 925Mhz constantly? I'm not sure I have the overclocking...
  10. Had to update motherboard bios!!! Weird, but it...

    Had to update motherboard bios!!! Weird, but it works now! Applied some Ceramique to the core, idles at about 30c, full load 60c so far @ 1050 core. Not sure how to OC these new cards, I pushed the...
  11. Powercolor 7870 MYST+ (Taihiti LE) wont post!

    Card dead? I get error code 97 on my p67 extreme 6 board. Works fine with the 6850 back in place. Any ideas folk? I hate to RMA a brand new card, but if thats what has to happen, thats what has to...
  12. I'm not in the UK, but I just ordered the...

    I'm not in the UK, but I just ordered the Powercolor 7870 MYST+ for 209$ Shipped with Bioshock / Tomb raider :). Hopefully its decent! I've heard the stock volts are a bit high on these, I'm...
  13. GTX 460 fan speed not adjustable in Evga Precision X?

    I seem to not be able to manually set the voltage, previously, I would leave the fan speed @ 60%, and it would never get above 65c, now I have it "set" to 80%, and its hitting 95c, and I can't hear...
  14. Ordered this board! ...

    Ordered this board!

    http://www.newegg.com/Product/Product.aspx?Item=N82E16813157231

    16+2 phase, Japanese caps, hopefully does me well! (I wont be stressing it nearly enough to justify the...
  15. Phases, that's it, thanks. (Uber noobin it up) ...

    Phases, that's it, thanks. (Uber noobin it up)

    Asus does, does gigabyte as well? I didn't see anything on their website, but I may or may not have selective seeing.
  16. Any way to tell the amount of PWM's on a board? 8? 10?12? etc?

    Sorry to beat a dead horse....

    But is there anyway to find this information out? Thew information on Newegg.com doesn't seem to be overly helpful in finding this information.

    Is there a...
  17. Replies
    2
    Views
    659

    corsair H50 making noise

    bubbles / general small racket when it starts up, goes away after 3 minutes or so. Should i be worried? Or is it normal. Thanks guys ^_^
  18. Replies
    22
    Views
    3,543

    i use AS Ceramique as well, before i want to pull...

    i use AS Ceramique as well, before i want to pull a cpu though, i'll run it for about 2 minutes to heat it up. never had a problem gettin cpu blocks/heatsinks off. And ive been using the same tube...
  19. wow. ok,right now i have it @ 182x22, got the...

    wow.
    ok,right now i have it @ 182x22, got the voltage down to 1.212 for vcore, qpi/vtt up to 1.2, seems to be pretty stable.

    I will admit, it has been ages since ive been into the whole prime...
  20. in the title, the gigabyte ga-p55m-ud2

    in the title, the gigabyte ga-p55m-ud2
  21. i5-760, corsair H50, 2x2gb g.skill 1.35v 1600Mhz, ga-p55m-ud2

    so far day one impressions of the core I series. Holy crap, i thought the core 2 duo/quads were easy to oc. i had a q6600 @ 3.4Ghz for 2.5 years, and finally upgraded to an i5-760, so far, i am @...
  22. 1.3 bios = 1.25 windows (idle) = 1.22 or so load,...

    1.3 bios = 1.25 windows (idle) = 1.22 or so load, not ABSOLUTELY terrible, and its stable @ 3.2, so ill leave it for a bit, then work on more Mhz later, the B chip seems to run much cooler/stable @...
  23. had just enough time to test the L741A, it had a...

    had just enough time to test the L741A, it had a VID of 1.325, and wouldn't do 3.6Ghz either, possibly something else in my board, as the L741A needed far more volts for 3.2Ghz than 1.25 like the...
  24. the 47B appears to suck, does 3.2 @ 1.250, but...

    the 47B appears to suck, does 3.2 @ 1.250, but will not boot into windows up to 1.412 @ 3.6Ghz
  25. ok in windows @ 3.0Ghz @ 1.250 volts, not bad too...

    ok in windows @ 3.0Ghz @ 1.250 volts, not bad too far, i think windows was being goofy because vista needed to install quad core driver. Will try OC'in again . also i cannot for the life of me find...
Results 1 to 25 of 251
Page 1 of 11 1 2 3 4