Well I think I ended up frying the board. I got the dreaded 0D Qcode after restarting the system because it froze while priming overnight. Tried new memory, different graphics card, removing all the...
Type: Posts; User: Oldguy932; Keyword(s):
Well I think I ended up frying the board. I got the dreaded 0D Qcode after restarting the system because it froze while priming overnight. Tried new memory, different graphics card, removing all the...
Not sure how you managed that with PI. It should've been around 10.4-10.5. I never saw anything like that happen with my 1200.
Did you set affinity at all? It's possible something kicked on right...
Glad I saved the bios settings for that last set of benches at 4.2.
I wasn't sure about it because of all the install issues for win 7. Spent 3 hours trying to get it installed before I bought a...
4ghz just seems to be where the vcore exponential curve starts to get bad on my chip. 1.38 gets me stable there, around 1.43 for benchmarks at 4.1, but it took me 1.6 to get through all the...
Long time no see everyone!
So my trusty 1090T based system had a few too many hard drive crashes and other parts go bad from age in the last few months that I decided it was time to get back in...
You don't need a Mac for 1-3, but you can do all three on the same OS.
In college when I was working with OpenGL development I found it much easier to test code on my Mac. Everything up to OpenGL...
URGENT! Sign the White House Ban on the Dangerous Video Game “SkyRim“
http://christwire.org/2011/11/urgent-sign-the-white-house-ban-on-the-dangerous-video-game-skyrim/
I guess someone took the...
If only working on a website for my college qualified me to go... I don't have a second form of id when I barely count as a consultant.
The voltage means nothing by itself. The total power used is volts*amps. If it's using a higher stock voltage than we would expect then it must be using a much lower current. We never see how much...
Generally whenever I get lower benchmark scores when stuff is running faster it's because they aren't stable and need more power. After that just make sure you have everything closed.
http://img228.imageshack.us/img228/3108/1090t40527stable.th.jpg
CPU Model: AMD Phenom II X6 1090T BE
* CPU Stepping: 1022BPMW
* CPU Frequency: 4050 MHz
* CPU vCore: 1.45V idle, 1.488V load
*...
I tested up to 300 htt with my nb at 3ghz. I didn't notice when I posted the first time that you had two sets of sticks and not just one so I'm not really much help.
I run some panaflows in push/pull on the H50 that I stole out of my dead vapochill. If I have some extra cash laying around to pick up an H70 I could do a comparison test between the two on my 1090T...
You may need some more vcore to get through the htt wall. After my 8 hour session of prime ends I'll see what I can do to get higher because I have the same memory as you. I haven't set timings on...
Figured out the problem my board was having. If the socket temp hit 76C then it would drop the multi down to 8x because it wasn't checking the core temp. I'm working around it so I should have a...
There's a clog in the loop somewhere, no idea exactly where it went bad. If anything I might buy a used one if I really feel the need to, but I already have everything priced up to make a full...
Thanks for the links guys, I'll be sure to post up some pics with whatever I decide to do to mod it further. I took one of the radiator with the two panaflow fans attached and it I'll put it up soon....
So I got one of these the other day to cool my 1090T because my vapochill died. Got it setup easy enough and it cooled much better than I thought it would, giving me 20C idle and 31C load at stock at...
http://img101.imageshack.us/img101/4076/phenom1090twprimecinebe.jpg
CPU Model: AMD Phenom II X6 1090T BE
* CPU Stepping: 1022BPMW
* CPU Frequency: 4059 MHz
* CPU vCore: 1.404V idle, 1.44V load...
Well so much for wanting to get a good clock in soon. My vapo seems to be dying. Normally at stock I would see it not ever go over -45c full load on the evap head, now I undervolt the cpu to 1.2v or...
Bought myself a crosshair iv and the 1090t. Got some ram but I finally had one of those problems where it wasn't on the qvl and it wouldn't work so I can't run the system yet, but the new ram is on...
I run it on a 3850 and unless I turn the fan up it gets up in the 90's. It has crashed on me a few times, not sure if it was the age of the cpu or if it was actually the graphics card.
Direct2D? Sounds like Microsoft doesn't want people to laugh that they're bringing back something similar to DirectDraw that they deprecated with DX9 I think.
Interesting nonetheless.
So I have brought a cruncher back online. Didn't have a desktop down at school last year and my brother wouldn't let me keep one running at home so I've been out of the game since last summer. This...
The way I seem to be understanding it is that the set of "cores" gets a single thread and kind of operates the thread in parallel in some cases. Other cases they would just be seperate cores. I don't...
