Search:

I don't remember the settings I used, that's the primary reason this is such a pain in my arse - I don't have a proper starting point. :shakes:

Only thing I do remember is the voltage I used to...

How long did you run Prime95?

Overclocking is a risk in itself, but if it's properly cooled the life expectancy can be lengthened a great deal.

It should be okay with a P4 connector, but the...

If you have the P45-T2RS, we're in the same boat as I'm trying to squeeze every MHz possible out of my Q6600 as I did on the Maximus Formula.

However, I reckon this BIOS revision is severely...

Load-line calibration...

If I remember correctly it's best left to enabled as it helps to manage excessive vdroop.

Cheers.

Same VID as my Q6600. Depending on your motherboard, you should expect 3.87 @ 1.5125v. :up:

As many other people, I tend to understand the GTL parameter and how to set it, but at the same time I don't. :confused:

Currently, I've got my CPU and NB GTL+ values at 0.067 and I worked out the...

What's the VID on your Q6600?

It's possible you're nearing the brink of "safe" temperatures using the stock heatsink/heatpipe design of the motherboard, and you might want to consider liquid...

This board is being a stubborn pain in my arse, I can get 3.6 stable, but I have yet to get anything else stable. I know for a fact my quad is capable of 3.87 @ 1.5125v, although as recent procedures...

Current....

http://img227.imageshack.us/img227/5325/shadownestwo9.jpg
http://img227.imageshack.us/img227/shadownestwo9.jpg/1/w1600.png

That's one good-looking board.

Foxconn is getting better and better with their enthusiast-designed boards. :up:

I wish I could count how many times that's going to fail.

Epic-like proportions. Good gracious. :down: :down:

I still have slight hope for a live-action MS Gundam movie.

Core 2 Duo my friend. :up:

I was proud owner of that board (while it lasted) and it's a pretty capable overclocker.

What brand of RAM are you using?

That doesn't mean anything, unless you're interested in law.

Don't I know that to be the truth.

Exactly what I'm wondering to myself.

I shouldn't have to fill up the second radiator, or should I?

Hah. Apparently bleeding the air from the 120 somehow begot my mind. Go figure. :rofl:
...

Congrats. :clap:

I've been considering taking all eight tests ever since I graduated from school.

Between that and the A+, I'm not sure where to start first.

Went about trying to setup the dual radiator loop today, and it seems I've run into a snag of sorts...

Here's how everything is set up

220 In to Apogee Drive In
Apogee Drive Out to 120 Out...

Psychos are all over the damn place nowadays.

The thing I liked most about Halloween wasn't Michael, it was the theme. Carpenter just sat at a piano and starting fiddling with keys and that...

Please tell me you're being sarcastic? :shocked:

Friday the 13th junk? Watch it buddy! :p:

No, I see your point and I can acknowledge it by applying exactly what you just said to Friday the 13th with all the modern iterations of what Jason...

It really was a steaming pile of sheet, wasn't it? :down:

On another note, I thought Zombie's re-imagining was pretty good. Although Tyler Mane wasn't as good as :banana::banana::banana::banana:...

Way to resurrect a thread, but I couldn't resist. :D

My results thus far...

http://img166.imageshack.us/img166/750/update4a1stableds1.jpg...

I'd suggest getting acquainted with the CPU/NB GTL settings as they have a huge impact on stability.

For a dual core it should be 63% of the VTT, if I remember correctly.

Yet again, I'll have to concur with Lenny.

It is a most compelling choice, deciding between a dual or a quad for several reasons but let's just assume the primary two are overclocking and gaming...

I beg to differ, Halloween II was nothing short of awesome as it continued the premise set up at the end of the first film, and picked up minutes after the first one. A feat not many movies...