Search:

Or do that : get Xigmatek Elysium mount everything insde and have a loop in that order : res->pump->CPU->RX360->GPUs->EX360->res. Think that might be a bit better ? I've read that temps on water make...

Ah my bad, my bad.
Temps: GPU's 55-54-56 under max load after 30mins of that load.
CPU - under OCCT reaches 75-80 on cores depending on fan solution in regular load the're around 65ish
So my temps...

Hey there, while I'm in the mid of figuring out WTF is wrong with my new rig ( hardlocks in eyefinity mode when tri-firing 7970s), I'm thinking of doing a bit of change in my waterloop.
Basically...

So I've changed settings and recevied the same looping sound within 40 minutes of Skyrim.
Then I've pushed the stock options -> 5 minutes of gameplay and whoosh looping sound.
Then I've put some...

Tested a bunch of settings for the whole day today.
All but latest ( 3x wood knuck for luck) failed with 09C codes, one with 124

The latest had 3.5h of OCCT done, had to turn it off, cause I want...

12.8 whql

Well I'll pull back to 4ghz tmrw and see what's what.

PSU is solid, at least it worked great with my i7 2600k rig with the same video cards.

As for trying 2x7970 do you suggest just disabling...

Need some help from gurus of overclocking.

System specs:
i7 3930k @ 4.7ghz
3x7970
Sabertooth x79
40gb SSD + 2x1tb hdds
2x4gb ddr3 1600 ram ( new ram will come next week).
Corsair A1200W

Thx for the specs. So I'm withint the operational limits then huh. Well 1.4 pops up only in OCCT and Prime, 1.37 is what I get in photoshop and games. I suppose I'll keep it that way then.

P.S....

Hello there,
I've finished my rig recently with i7 3930k. Since I couldn't fined the appropriate Sabertooth x79 owners thread, I'll have to ask in this one ( aand probably this will be yet another...

Thanks folks.
I'm waiting on ram now, and I'll start my new build :D

I think so. But I'm a noob, so don't quote me )

Hello there, and thanks for checking my thread.
I need an advice here.
Current rig:
i7 2600k @ 4.7ghz, P67A-UD7-B3, 2x4gb ddr3 1600, 3x7970, 1200w Corsair PSU
WC: 3x Koolance 7970 waterblock,...

Re-did the loop, ran it for 24h so far. My PC is back to working condition now w00t. So far idles : core 0,1 -> 26-27c core 2,3 - 37 (wen loaded all cores go to 57-60 range).Idk why, but t> that's...

Well my panic is over :
1. Took apart the whole system
2. Filled plastic container with distilled water
3. put the rads in with tubing stuck in the air and pushed air through all of them -> no...

Sooo it might be the case that I just had a random panic attack with no reason?

If I use distilled water for that test, is shouldnt corrode too much right?

Hello.
Well I need your ideas my friends.
I've finished my build. Ran the system, and wohoo it worked at everything was a-ok!
Then I noticed that there was that electrical buzz sound comming from...

An update on my build:

I'm experiancing a "sad panda" moment, because those koolance sli connectors sucks, the top peace is so thin that its hard to fully tightin it up, and I had them leaking (...

Well it would've been the greatest fail ( such as Bulldozer) if 680 failed. I mean it's been almost 3 months since release of 7970, Nvidia was bound to make something faster to justify the time it...

Ordered xtra parallel connectors :D . Till end of may, then I think I will get that sexy double 35x res/pump combo :yepp:

ok, so if I go in parallel, will that help?

Here's my connection order:

res/pump/rx360/cpu/K140/GPUs/RX120/Res

I will eventually ( in a span of 6+ months) will get this :
XSPC Dual 5.25"...

So either I have to go parallel, or buy another reservoir/pump?

Thx.

Well here's my final order (half already here, half is on its way).

1x XSPC RX360 Raystorm Extreme kit
1x XSPC RX120 rad ( for bottom of the case)
1x Koolance Single 140 Copper High Flow...

Bump!
Quick question:
If I happen to get two different GPU water blocks for 7970s ( one from EK and two from Koolance).
Can I still connect them right? with this :...

Well I can add a 140mm single rad and mount it with the back 140mm fan in HafX, will that be a sufficient addition or a dual-rad is a must? ( not sure where I can put one inside the case without...