I was reading through and thought I would ask about a Nikkor 16-85mm AF-S f/3.5-5.6G ED VR lense.
I used to run a Nikon f2 a while back, before somebody else thought they were more entitled to it...
Type: Posts; User: Wolf_Rider; Keyword(s):
I was reading through and thought I would ask about a Nikkor 16-85mm AF-S f/3.5-5.6G ED VR lense.
I used to run a Nikon f2 a while back, before somebody else thought they were more entitled to it...
A good artist with new needles, really doesn't hurt all that much.... not to be mistaken... it does hurt but beware of the butchers out there that jab the gun down and drag away on your skin... this...
I used to run a pair of 3870's without any fouling, myself...........
but the (at least) HIS 4870x2 (not two individual 4870 cards but the new one card with two gpu's onboard)
It's certainly a...
Catalyst 8.7 don't work with the 4870x2, as the drivers were released before the card was.
You need the drivers that came with the card or the drivers listed on the manufacturer's site (HIS have...
here's a thought which works very well... dot the night sky onto your ceiling with UV...err perhaps luminous paint (if there is such a thing) would be better
great job there... but be careful with the custom wood.
Basically it's held together by formaldehyde resin (If I understand correctly), which when the wood is heated, the resin releases a very...
Has anyone noticed yet, the cooling solution on the newer 4870 x2 2GB cards slightly foul the SATA ports 0 and 1 (the top two ports if mobo is held with CPU at the top) on this board?
If they have the same ear muff arrangement as the DT108 or 109's, you won't get much better anywhere.
I work in the entertainment industry and we'd have those things on for hours on end.
My PSU is the linked (1x 550w + 1x 650w) units that came standard with the P190 case and the VA rating on the UPS is 1500/ 1050w. The load indicator on the UPS says 50% load, with everything plugged...
be careful... some UV paints can fade after a while
I get a similar.... restore power, boot and then my rig shutsdown and reboots itself again into no screen etc... so I soft reboot and all fires up good.
No 'Post Failed messages', or anything like...
Manel
My apologies, the rear panel expansion bracket I used which has two ports on it, came from my old BadAxe2 motherboard
I was refering to the rear panel expansion bracket, not the normal USB...
I'm wondering...
I use the supplied Rear Panel USB Header that came with my DX38BT for the keyboard and mouse, which has them on USB Host Controller 2935 IRQ 0x00000013(19)
Might the positioning...
I came home to find an Energy Australia tech at the fusebox replacing analogue meters for new digital units, and pointed out to him, we should have been notified at which he went a tad white when I...
For Vista...
Try - MSConfig/ Boot/ Advanced
tick the box at the top left and select the number of cores you are running
tick the other box at the top right and type in the total amount of RAM...
Thanks for the advice of CPU-Z calcs... now I'll stop behaving like a nervous mother hen ;)
My mobo had decided to "lose" the keyboard when in BIOS once. I rebooted, went back into BIOS and the...
CPU-Z (1.44) shows a 0.5 - 1.5 HZ drop and sometimes rise for Core Speed, similar for Rated FSB and Bus Speed
DRAM Freqency also shows falls and rises
Multiplier is fixed @ 10 but the same...
My MCH voltage, plus FSb seems to ride up and down (drop then rise again) a tad in my DX38BT... is this supposed to happen?
Any help would be appreciated
Hi,
I was hoping someone could clarify something that seems to work
MSCONFIG/ BOOT tab /ADVANCED OPTIONS button...
In this page there are two check boxes, one for Number of processors and...
Just thought I'd ask as it's a recommendation from ATI forum :shrug:
Hi...
I found mine would loop boot also but only 3 -4 times then fire up as normal after changing memory settings
MrBunglex... I've noticed from your rig shot you are running two crossfire...