Search:

Type: Posts; User: Overspeed; Keyword(s):

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Speedstep? Maybe ... but usually underclocks all...

    Speedstep? Maybe ... but usually underclocks all cores AND must be turn ON in BIOS?
  2. Ok, time for something a little off topic. I've...

    Ok, time for something a little off topic. I've been reading up on the benefits of running RAM & FSB 1:1. First off, my RAM is 2x2GB Mushkin PC28000. So a FSB of 1000 or 500 depending on how you look...
  3. On a different note, while I am preparing to pull...

    On a different note, while I am preparing to pull the ciru-pipe off, clean, ceramique and re-seat, I need to think about putting the spot fan on the NB. I have been informed that I will likely need...
  4. I didn't want to bump up the SB without...

    I didn't want to bump up the SB without understanding what concequenses might result. I know little about the SB :confused: I'm also not sure what a safe setting might be.
  5. Bump

    Bump
  6. I recently added a new SATA drive (3 hhds active...

    I recently added a new SATA drive (3 hhds active now) and have a number of USB devices always running. Anyone have any thoughts on wether I should take the SB off Auto and assign it a higher value?...
  7. Awesome guys, I appreciate the input. Do you have...

    Awesome guys, I appreciate the input. Do you have any favourite brands as far as the ceramique is concerned? I'll use some on the CPU as well. I was looking at the mini 40mm fans on this page:
    ...
  8. How thick should the ceramique be before...

    How thick should the ceramique be before resteating the pipe? You mention using a razor blade, which in theory would scrape all the ceramique off (if the blade was pressed tight to the chip face)....
  9. bluspikez, loonym, AaronYuri Might any of you...

    bluspikez, loonym, AaronYuri

    Might any of you offer suggestions on where to start in regards to pulling the pipe off. This is not something I've ever played with before. I assume I will need to...
  10. Ok, so I let memtest run over night, 8 passes on...

    Ok, so I let memtest run over night, 8 passes on both ram chips, 4 passs with only 1 ram chip installed, no errors detected. loonym, during my initial trials, when I had windows semi stable, cpuid...
  11. Well, memtest has gone 5 rounds so far with no...

    Well, memtest has gone 5 rounds so far with no errors. <shrug>???
  12. If I had a corrupted installation, wouldn't that...

    If I had a corrupted installation, wouldn't that mean windows would continue to fail after turning off OC and running at stock speeds? So far, when I set back to stock, all programs and benchies work...
  13. My sig is old. I'm no longer running the 4x1GB...

    My sig is old. I'm no longer running the 4x1GB Axeram, now running 2x2GB Mushkin PC-8000 Ascent, brand new, 1 day old. I will nevertheless, run a series of memtest. How long am I suppose to let it...
  14. Well after a few more hours of testing, I think I...

    Well after a few more hours of testing, I think I must conclude that this setup is not going to be an adequate overclocker. Any NB setting over 1.375 causes high instability. I have not been able to...
  15. BababooeyHTJ, I am having mixed results with your...

    BababooeyHTJ, I am having mixed results with your settings. At first, PC posted ok and loaded Vista. Shortly after, BSOD complaining about win32k.sys. Leaving the CPU GTL & FSB TERM alone (0.866 &...
  16. BababooeyHTJ, I tried your settings exactly as...

    BababooeyHTJ, I tried your settings exactly as written. My PC posted right away and begun loading windows. As soon as the GUI loaded, Vista said it suffered from a crashed video driver and has...
  17. TYVM Baba, i'll look for that PM shortly. To...

    TYVM Baba, i'll look for that PM shortly. To further my previous post, instead of using SP2004, I downloaded v25.6 of prime95 and now both cores are working hard. I'm going to try Baba's numbers now.
  18. So I threw my new Mushkin ram in 2x2GB, flashed...

    So I threw my new Mushkin ram in 2x2GB, flashed to 1B3 and tried an OC on my E8400. Initial results wearn't favorable. I tried right away for a 8x500 to achieve 4Ghz, no post. Tried at 9x400 to...
  19. Oddly enough, only two of the six of the back...

    Oddly enough, only two of the six of the back panel (bottom 2) USB ports allow my new USB key to operate correctly. It's concerning ... hmmm.
  20. Thx Aaron, I'll keep this guide handy. In your...

    Thx Aaron, I'll keep this guide handy. In your dealings over at the MSI forum, have you found anyone who has posted setting used to get good results on the E8400 on the P7N since the BIOS was changed...
  21. Aaron, yes I did that and now am flashed to 1B3....

    Aaron, yes I did that and now am flashed to 1B3. Now looking for basic starting settings for the E8400. Lots of documentation on the old integer settings, little found since change to actual voltages.
  22. My problem is that since the BIOS was changed to...

    My problem is that since the BIOS was changed to reflect actual voltages instead of the integer numbers, there is very little documentation on this thread as to what settings users used with success,...
  23. I got it to boot finally using the newest version...

    I got it to boot finally using the newest version of the MSIHQ tool. It can repair the data geometry of certain USB keys. So I am now on 1B3.

    Loonym, I'm now ready to replace my 4x1GB Transcend...
  24. No, Im using the actual tool created by MSIHQ: ...

    No, Im using the actual tool created by MSIHQ:

    MSIHQ USB Bootable tool and BIOS Helper

    New news on this issue ... when I plug the USB key into my monitors USB hub, Vista can load fine with it...
  25. Hey guys, I'm trying to load the new 1B3 BIOS...

    Hey guys,

    I'm trying to load the new 1B3 BIOS to my P7N. I just bought a new 32GB flash drive and loaded the BIOS onto it using the MSIHQ USB Bootable Tool. When I restart the PC, it hangs for...
Results 1 to 25 of 64
Page 1 of 3 1 2 3