Search:

BeepBeep2, my asrock deluxe3 would do that for idle when i set it to run at 4ghz. That was with cool and quiet disabled. look in your bios where c and q is listed and look for enhanced halt state...

I have no complaints with the deluxe5 except the bios still need a little work. It is almost the same as my deluxe3. I am running at 4mhz/ fsb at 200 / mem set to xmp profile 7/8/7/24/40. these are...

god 43 did you get the new bios

which board did you buy

try another power supply if you have one

A couple of the guys were poking fun at the deluxe5 which is ok. I have the deluxe3 and i have had alot of fun over clocking it. My 1090 will stress the board real good, air or even watercooling the...

Chew that was a great review on this memory. the best i could run my fsb was 218. I am now running at 250 with same voltage and my comp. has a little more snap to it when things load up or surfing...

i would think the deluxe 3 and 4 have pretty much the same bios. check cpu load-line calibration. Change to normal. I had the same problem with voltage. To turn off cool & quiet, i set amd io c-state...

666, The best short term upgrade would be a SSD. It may not make your games any faster, but the rest of your computer performance will make you smile. The one upgrade that i have done on 2 laptops...

Beep, I have been watching this thread,etc. i just ran 4hrs of prime95 on my 1090. I have a Asrock deluxe 3 and my board has cool & quiet / disabled. C1E is enabled to keep all cores at full speed....

No spare Bios chip, but if you get it stable I will give it a try. My mem is Gskill eco stuff. Cas 2 / 8 meg . not the best for overclocking but very stable.

Flashed back to your Mod 1.90 / set LLC to normal and all is good. Thanks alot for that tip. I did try a couple of those settimg, i guess i missed normal. Right now i am running prime95 at 4.1 at the...

Ket, I flashed to your mod bios 1.9
I was hoping your mod would fix the cpu volt problem i am having on my 1090. For some reason my cpu volts are not stable with 1.90 if i set volts at 1.36 they...

which bios version did you mod.

Beep if your warranty is over on your power supply. Take the cover off and look at the caps for swelling. my x6 could prime and run 3d mark at 4ghz but every now and then it would bluescreen or shut...

I would try a different power supply. Run the windows experience index at stock / then start raising your overclock and retest. my old power supply would pass at stock and start failing at a mild...

new bios out for 890fx deluxe 3 ver. 1.90 just flashed and did notice a new item / load line calibration option

Yancey,

I had the same problem you are having, any overclock at all with my 1090t would crash/bluescreen/shut-down. WEI is a good test for your power supply / I replaced my 700w with a 850w and...

Problem Solved, I took my old 700 watt power supply out. Took the cover off and had one bad capacitor, not bad. I replaced a couple of months ago the same power supply i put in a friends comp and...

Ket
If you are running windows 7, run the windows exp test overclocked and see if it will complete when you are overclocked. I pass if my x6 is at default. Any overclock and i get a hard crash....

i have had this board since the egg started selling it, overall a great board. g-skill eco ram and 1090. run 4 hrs prime stable at 4.0ghz and have ran that speed until last week. turbo boost works at...

I have the fx board and the fan is quiet. This board is very good and stable, May not have all the options as the big boys in the bios. It has all you need plus floppy and ide if you still need them....

Hey Guys,

The egg is showing the UD5 in stock

it would be nice if they would fix these problems they are causing. This board could be the best out there if they would get it working right. All they have to do is add all the options that are...

new bios out P07

able to change multi but will not change speed of cpu. ACC will boot in auto,not sure if it would boot in P06. These are the only changes i have tried. Will try tomorrow to see...