hey ,
i would go for discharge with 8mm(5/16) instead 1/4 (6,35mm ) , this configuration are used for small compressors (under 20ccm).
one of refrigeration rule say that you should use the inleet...
Type: Posts; User: nachtfalke; Keyword(s):
hey ,
i would go for discharge with 8mm(5/16) instead 1/4 (6,35mm ) , this configuration are used for small compressors (under 20ccm).
one of refrigeration rule say that you should use the inleet...
Hi , nice build :)
if you permit i can add some suggest to your build .
rotary compressor are very hoter compressors , it can reach in normally operating sistem till +120 degree.
if you havent...
-150 at 1kw heat load ? Well then you can foget about a 3 stager cascade ...you would need 4 stager cascade in last stage R50 refrigerant ...
i would go with:
1st. R452a /R404a/R507
2st....
the fact is , that you wont calculated your unit (and that you can t understand) and you wont charge it with load tester
a fan controller will be mandatory only when you have very low ambiental...
well , we speak 2 different language ( sorry for my english) ... but the "refrigeration language" it is or should be the same from US to EU and Asia and all over world :D , every condensing unit is...
not condenser increase the COP ( coeficient of performance) , the XV will do that in this case the cape tube ...a small inleet of the cap tube will increase better the COP ....
this large...
it?s a bit unreal what you say , NEK2150gk has only 12ccm ...with souch small compressor at 300W you can -25 to -30 at 300w heat load hold!
also your condenser is to large for this compressor ,...
you?re wrong!
- first of all you should know a small die surface is much more hard to cool than a bigger one , even the output consuption on the bigger die are 2 time above!
- second , when you use...
just for curiosity , what temps have you for example in wPrime 1024M , with 6700k/skylake cpu 4core/8HT at 1.68v? or at 1.58v? open cpu-z and real temp in parallel with the benchmark to see your...
that condensor are much too bigger for that compressor ....that are designed for 2HP compressor , if you look at his ports are designed for 10mm pipe , so danfoss clx 18 use 6mm port...
2013Feb
13082500173729/30
tested today my old RETAIL G.Skill2666cl10 , more to come:D
all air , ram 2.240v bios -2.238 DMM
http://abload.de/img/retaildcqng.jpg
it is 100% 17K btu compressor:)
LG NJ236PAD (14,3k btu) has same datasheet specs compared with Moc datasheet for NJ282PAD :) lg mistake
take a look
very nice clean build here:)
one tipo the LG NJ282PAD - is a 17000BTU compressor:)
http://i900.photobucket.com/albums/ac204/test00/1_zpsf02df6ec.jpg
pretested today under SS(-35*) + EK sf3d ram cooling plate uni adapter my best psc kit 2000cl9 pcb KO-8155 , no tweak , only stability test ..vram1.94v...more to come on LN2:D
...
nice run George!:)
if they can third tertiary at 2700+ 6-9-6 than can be win combination, nice kit:)
is not only about good ram here:), the OCF behavior is very good and compatibility with all kind of IC ram?s what i tested , samsung , hynix ,psc , bbse ...overclocking it can be easy if use right...
nice run Crusty , it is green pcb your ram? , i have tried 2 kit ripjaws 2133cl8 black pcb and was turds on air , one of these test on LN2 but not good scales with cold
i got today one kit 2133cl8...
got these 2133cl8 green pcb today , first test 1300 8-11-7 1.83v:) ln2 soon
OCF is rock solid with psc/bbse ..
http://i900.photobucket.com/albums/ac204/test00/bbse_green_pcb_zps5f4fe19d.jpg
nice psc Alex, need try them on cold
nice board Nick:) work very well with samsung -1,87v, next day i will try 4x4 , some good psc and bbse for challenge:)
...
very nice chip and great work:)
look very nice Kenny :)
ordered today mine OCF , can?t wait:)
Nice cip here
This gives hope to others , honestly is very hard found so cip..
