crossg | Core i7 990X [6C 6T] @ 4828.8MHz | 1.456 | ASUS Rampage III Formula | Air | 3045A752
Started LinX and went out and changed the front brakes on my car. Came back in and it was finished 23...
Type: Posts; User: crossg; Keyword(s):
crossg | Core i7 990X [6C 6T] @ 4828.8MHz | 1.456 | ASUS Rampage III Formula | Air | 3045A752
Started LinX and went out and changed the front brakes on my car. Came back in and it was finished 23...
Awesome. Thank you! SLI 580's stock speed.
New Bios 701 on the Asus site
Rampage III Formula 0701 BIOS
Update Intel Raid Option ROM
Yeah I don't have an issue or argument with what you said.:) I had already
said that we were drifting O/T. Which loosely translated means end of conversation!
@Zalbard you can delete the above...
Onkyo is not well known for customer support so hopefully it will not have any gltches when released. I love my 3007 Receiver ($2500.clams) but their support is not the greatest.
Just tried the same settings on my 990X and bumped the uncore to double the ram speed and set the VTT a little higher to 1.3375. No desire to push the Vtt any higher as I don't think the gflops will...
Second SS on above post. Pretty much the same as 5120Mb, just took longer.;)
Spot on. :)
Bumped it a couple of notches and got a few 100 gfps. Tried with 5120 Mb of ram, 10240 Mb didn't seem to help with more ram and then tried 5120 Mb ram with 6C 12T. Too much heat to...
crossg | Core i7 980X [6C 6T] @ 4752.3MHz | 1.448 | ASUS Rampage III Formula | Air | 3045A708
Couldn't get 100.0000 Gflops but tried. Need water cooling to go any faster, maybe someday.
Much...
Not a Kraken but I'm happy with it and it will surely go higher. (air cooling)
http://img51.imageshack.us/img51/731/473166c6tlinx.th.jpg
A quick Vantage bench at 4.8 with PhysX off.
You might want to try offset voltage at medium or high LLC instead. Lots off people have had success. I use it for my 4.7 settings. It supplies about 1.32 vcore and drops to 1.312 under load. Strange...
crossg | Core i7 990X [6C 6T] @ 4791.8MHz | 1.448 | ASUS Rampage III Formula | Air | 3045A752
Ran and passed then noticed ram was @ 2T command rate. Set to 1T and re-ran. No difference that I...
Thanks. Working on my 990X stability, so might as well use the new linpack.:up:
Sorry to here about your chip and condensation Dumo.:( Hopefully you'll find a replacement quickly. Think 58X.:)
Looks like they heard you.:)
That was a quick bench and if I tried to run prime at that voltage it would overtemp within the first minute. Mine would probably be around or over your temps with 1.35 volts.:)
Am I missing something?
I've seen that issue 5 times today, but it's because I'm pushing my Cpu and Gpu's to their limits and 3DMK 11 really stresses the card more than the cpu. Happens on my 980X rig as well so it's...
I ended up uninstalling AI suite on mine. Any time I opened up CPU-Z or AIDA the AI Suite error warnings were steady. So I uninstalled it. Hopefully the next version will get along better with other...
This is what I'm getting with my 2600k and Sli'd 580 GTX SC stock speeds. 1920 X1080, Extreme settings, Average is around 120 Fps. If I enable MSAA I get the flickering. If I enable Vsync it runs...
Looks like you have a great chip there.:up: Wish the 990 I bought would do that kind of voltage..
It's version 100.27 from the Asus website under this board. Just changed the colour by adjusting hue under the skin tab.
If you want the Blue ROG CPU Z 157.1 go here
I see they have CPU Z ROG 157.2...
Actually my box doesn't have stickers and it says rev B3 in 5 or 6 places. sides of the box not shown.
Just an FYI
This may have been mentioned before but the random BSOD's at stock idle while browsing the web were driving me nuts. Just did a test with C states enabled and auto and found that auto...
I had a simalar problem when changing from Mushkin to Gskill. I reset CMOS with power unplugged. Then Installed one stick in slot A2. It started, I then set the timmings in bios saved, shut it down...