Search:

Yes its my first with TCCD.

But I was the one that first found out what Samsung was capable of on a KR7 and PC2100 ram when I hit 197 on a KR7 and 212mhz FSB on a KX7 later. :D

Thanks for all...

No...no go 310 is not stable no matter what.

Its the RAM 2.8V is just not enough.

But it works at 305 4x htt :)

I maxed out my voltages but no improvement...I have to get a better cpu :(

2400 with 1.6V baddish :stick:

Its :banana::banana::banana::banana: but waiting for a handpicked one now.

I cant run 310 with the multi under 8 I cant run 300 with multi under 8. :confused:

The loose timings do the job ok so I am at 305ish but seems there is a problem with the multipliers I cant run 300 lower than 8 and my chip is a poss :mad:

305 htt at 2x

Not bad for 1gig or...

Ok stuck at 280x4 cant get higher but at least this is stable as hell :cool:

It feels like the ram is out of juice :(

What timmings should be used? Ive got 2.5, 3, 3, 6, 11, 16 (CPUz)

Hehe....ok I get it now :)

Now at 280x8 will test this cpu now.

I am having troubles with this board....but mostly becouse I was gone from overclocking a loooong time and I may be missing a lot of stuff in the bios.

Can we please make a good bios settings list...

The Fatality is fancy nothing else.

Got a AN8.

dunno why you guys buy the Fatality and then :banana::banana::banana::banana: on it thats its expensive.

Buy the AN8 its the same board!

PS. Will go try the 12 bios now :toast:

Did all that...the FSB drops when doing the L12 mod. My 2500+ mobile is detected as 6x166mhz and I even tryed my 1700+ which is detected as a 3200+ so its l12 modded to.

I changed 3 types of...

arggghhhhhh:mad:

I spent another hour tryin to get FSB over 220 and I cant!!!!

runin tictacs d22 3Dfire bios and l12 modded mobile it gets me even lover.

At 218 its completely stable...and...

Hi guys after a long time...:)

The oveclocking hormone struck me again and I started to build a rigg to practise again:D

Specs:

Mobile 2500+ good for 2.850mhz and 1700+ good for 2800mhz...

1700+@2714mhz...done that a while ago with h2o.

Need help building phasechange:(

http://www.muha.cc/malecky/2700.jpg

I have 50B at 228mhz CAS2 6/3/3 and Kingston PC2700@ 228mhz CAS2 6/3/3...you cant clock;)

I'm getting some Kingston PC3000 to try out sometime this week. Wil find out if this is my problem which i doubt it will help.

What about the 3.3V line?
...

not getting me farther...

vector7: you did not quite understand me.

I can run DC at 228mhz all day with 1.6V Vdd and 2.7V on the ram...if I increase the Vdd to 2.1V and Vddr to 2.9V I do not...

Dont you think my problem is just a bit different?

I cant run one stick any faster...DC does not have a impact...still 228mhz and thats it...

I'm off to try SC in bank 3....

Can someone...

where can I get the bioses that are not on abit.com.tw?

Getting another NF7-S aniway..but...

What is the newest BIOS for the NF7-S ver 2.0. The bios file on Abit.com is not the right one for the 2.0 rev....

Which one is?:confused:

OK guys I'm back...

I got another Abit NF7-S 2.0 shoved some AS2 on the chipset and started...gues what.... stops at 228mhz AGAIN!

I just can not belive it...

I switched RAM, PSU, GFX Card,...

Have only a 3.3V ATI 3D charger4MB:p

I thought of it...but why? The AGP is locked at 66mhz or 70...I also tryed 70mhz.

Will try to get a new GFX card...damn this is intence...:rolleyes:

Nothing runs cooler if it has 256kb extra of high freq. 0.13micron CACHE right beside it.

The Barton is much more power hungry and hot...the extra surface helps...but keep in mind that the extra...

did you set it to 133mhz operation? "unlocked it"?

That was the problem with 166mhz CPUs they just cant handle the high FSB...I think the barton can...but what do I know I'm stuck at 228:mad:

Interesting... looks like I will get another NF7-S tomorow...well I realy like FSB...I relay realy like FSB and nothing is gonna stop me sure not a weird Abit board.:cool:

I even switched the IDE...

Tryed to cool down again.... I have so many fans now that the ambient is 11°C...no better...the Vdd does not matter...:(

I still cant believe this is all this board has!

DC 228mhz CAS2 6/3/3...