Search:

Thats what i dont understand - ive read the gtl ref stuff and I am still confused on how to set it up properly. If i up my cpu term then my cpu ref and mch ref should be changed as well...?

Hey guys - trying to gain that last little bit of stability on my setup....the settings i have now can intel burn test, and ran prime blend for almost 10hrs before i got an error. So i am close but...

ok thanks - i will give that a try...

What would be a safe MCH?

Which timings would you recommend I loosen?

Hey guys, here is a screen shot of my settings - I am running e8400 @ 500x8 and just need to get that last little bit of stability.

specs are:

e8400
ud3p
8gb (4x2gb)of mushkin redline 996593...

love your choice of beer - made right here in my home town ;)

i cant remember what my temps were without the fan - its been a while but i do remember putting the fan on because the chipset was getting warm....but i am water cooling so there isnt a fan by my...

not sure about ic3man but my chipset temps @ full load are 31~34c depending on ambient temps of course (that is with the fan on).

i know you are using air cooling but you may want to try out the fan for the chipset heat pipe......see if that helps out your temps.

just wanted to bump this thread and also post that i was able to ditch my warm boot finally....in my case it was not enough vdimm and vcore - even though everything was stable it just needed that...

no the warm boot is still there in 1009 bios

i think the board steps in and changes settings even if you force it not to...

i have manually typed in timings and the board will over ride those timings and select its own based on fsb speed!!

well i am happy with my opteron 170 now. it is the not so (in)famous 0541 RPMW and it needed quite a bit of vcore to get stable...basically needed 1.4v + overvolt = 1.6vcore roughly for 2750 and my...

how do you guys get all of the black sealant off so well? is there a trick to that???

since we are talking about opty 170's etc - just curious

charloz24: how have you made out with your 0541 so far - ive got the same stepping...

fcg: ygpm ;)

subscribed

any updates on the 512 oc bios?

I just thought I would share some info that I just found out regarding the A8N32 and booting from a usb key.

Im not sure if this is true in every bios version but in version 1009 once you format...

has anybody been able to boot from usb key with this motherboard yet? i have a usb key that boots fine off my dfi board but i can not get it to boot with this mobo...

if anybody has had any luck...

just curious - what is the max people are able to set their K8>NB multi and also the NB>SB ?

i have k8>nb set to auto and it sets itself to 3x for my 275fsb but after i flashed to 1009 bios the...

my vote is with the maze4 - and ramsinks ;)

ya they are different series but what are the differences? i compared the two and the only difference i can come up with is the pcb colour and the dfi style sockets aka neon etc...

as far as...

ya - these were handy though - most parts have been carried over from previous builds