Thats a sweet case :o
Perfect design for WC'ing :D
Type: Posts; User: MorGo7h; Keyword(s):
Thats a sweet case :o
Perfect design for WC'ing :D
oxidation on the pcb?
Got a maze 4 cpu block (socket A) an old BIP rad it think with the solid fittings and an eheim that makes a lot of noise :p
And some tygon that became green :x
Have you mounted the pump vertically?
Mine was making noise in this position. When I had it laying down with the inlet facing upwards the noise was gone.
http://i216.photobucket.com/albums/cc223/MorGo7h/PC/IMG_4925.jpg?t=1221770066
http://i216.photobucket.com/albums/cc223/MorGo7h/PC/IMG_4930.jpg?t=1221770085
...
I've seen ppl with a pa120.3 in a Cosmos S but it requires some modding.
An mrc320 fits perfect ;)
Belgium isnt that hot. But there a lot of windows in this room and the sun shines thru it in the afternoon. On a sunny day it's 25-29°C here :(
But in winter... When I come back from school and I...
thx :)
It's the thinnest O-ring I've found here :p Dno where I can get/make a thinner one.
Thx for the input guys ;) My OC is stable and even with 26°C ambient and a 100TJmax it doesn't reach 60°C...
CPU only loop?
Btw, this is my home-made nozzle with the O-ring I'm using :D
Made from this ball pen :p
http://i216.photobucket.com/albums/cc223/MorGo7h/IMG_3923.jpg?t=1222108831
...
My gpu idles 5°C lower than my CPU in coretemp. With realtemp 2.70 its the same.
I think you misunderstand me :p
I made a costum 5mm nozzle and I use an O-ring to seal the gap, but it's bowes my block more than stock :p
Gonna check if the nozzle kit is available here.
Thx. I did 3 remounts and got 3times the same temps (-+1°C difference max). I made a nozzle from a ball pen :p But to my FuZion inside I'm using a washer from my old Alphacool res (Thinnest O-ring I...
Realtemp = Tjmax 95.
A 120.2 is better than a pa160. But still not enough for your entire system :(
1.336Vcore Idle, 1.344 Load.
Hi,
My CPU, E8400 runs now at 4ghz (8*500) 1.344Vcore idle. My idle temps are 43°C and 39°C Idle and the room temp is 26.5°C. And my max load temps are 56°C and 53°C with the same roomtemp. The...
I'd go with a triple rad for all the stuff u need to cool.
I bought XSPC tubing last week and it's awesome. It's cheap and good :o I like it better than my tygon R3606! It's a bit stiffer but it...
I love the corsair PSU ^^ I got a stable oc on my cpu 4Ghz (8*500) and 1000mhz ballistix. My HD3850 is running @ 850/1050 (I know bad card but... :()
Got the camera! :D
Here's my updated rig
http://i216.photobucket.com/albums/cc223/MorGo7h/PC/IMG_4925.jpg?t=1221770066
...
Updated my rig:
Sry for the GSM pictures :( My dad forgets always forget to take the camera home...
http://i216.photobucket.com/albums/cc223/MorGo7h/Afb061.jpg?t=1221759811...
Ballistix 800mhz rated at 2.2V. I'm on 500fsb (500*8). Thx for the tip about VTT :) Just did a 3dmark run with my 24/7 settings and 1.26V for the NB seems to be ok.
Thx for measuring the voltage of...
Major Vdroop... With LLC off it's worse :(
1.3500 in bios gives me 1.280 idle (cpuz).
My voltages are:
Vcore: 1.6xx I think (bios)/ 1.336V Idle (cpuz)
vPPL: 1.52
VTT: 1.22 (Too high?)
vNB: now on 1.26, was on 1.3.
I'm still trying to lower some voltages. Vcore and Vppl are ok.
Thx :) The only reason why I wanted to run 9*445-450 was because I tought 450fsb was easier for my board. :confused:
But nvm, 500fsb is faster so... I just wanted to achieve 4ghz 27/7.
Can you...