Search:

Hello autocascade lovers,

I have a question for you. I have today received an unopened canister (~ 1L) of SOLKOVAN refrigeration system solver:...

Could well be algae, it's a perfect spot for growing. PT Nuke is far from 100%. Open it up and wipe it off. If it doesn't come off and is indeed corrosion you are covered by your warranty.
...

Hello!

Remember X1800 and X1900 (XT) cards? Get the VRM heat sink from it:
http://www.techpowerup.com/reviews/Thermaltake/TMG_AT2/images/vreg.jpg

I use the same in my OC experiments:...

R92F caps on main VRM are 9.00-9.05mm

Watercool brand backplates are made from stainless steel.

Good work Simon, keep it up!

Hey Shoggy! Long time no see. :)

The R29F is exactly the same as AMD reference, only with different silkscreen. The upcoming R29FA is however completely non-reference. I have this information...

Fantastic! What are maximum BIOS settings here? How high can you raise the APU clock? Is the PCIE bus speed locked?

I was looking for this kind of information all over the internet. So you're telling me that this particular ASUS board can OC small Kabinis? Can you show me some BIOS screens and options? Is there...

What you are experiencing is called leaching of the plasticizer. Quite nasty stuff, I would suggest swapping out the tubing immediatelly:...

I have three PSC X that can do 1200 7-11-7-28-1T @ 1.83V (A3G-A), the two others (one X A3G-M, one T A3G-U) are unable to do that (they stop at around ~ 1140). I just want to run 4 sticks.

Since...

Could be the chiller is sucking in air on the suction side (leak in the evaporator).

RMA time, bro.

A true benching unit. Next time maybe add a plastic shroud/difusor around the fan blades to further protect it!

Perfect! :)

If you want to really stress it out then you should try FX-8150 or 8350 overclocked to about 6GHz (it should do it at -50?C) and 1.7V+ and then try Wprime :) That should be in exceed of 350W.

Mine did roughly 250W on -60?C (LPG/CO-2) with 9600btu/h rotary. But great effort and excellent result! :)

3770K @ 4.5 at low volts is maybe ~ 100-110W.

A 12V DC variable speed compressor 3-5ccm is the only quiet and low power solution (20-80W power draw) and you can probably achieve around -10?C on...

Laser cutting is only for prototyping. For the series you need the stamp press cutter. Otherwise here's the trick:

Tell me the total lenght of the inner side of the o-ring channel (recess) and I...

Thank you for all the hard work you have put into this! :up:

Tl;dr variant for the lazy bunch:

This is a waste of a good compressor for a single stage unit, Bart.

I did a 250W capable LPG (cooking gas, filtered and dried) / CO-2 autocascade that held -60?C loaded. You may find links in my...

Ha, crap then! :) Please contact our support at www.ekwb.com/support regarding Dual D5 top so we can sort it out for you. :up:

Narrower (0.8mm) compared to older generation (1.0mm; GeForce GTX 600 series, Radeon HD 7000 series).

Flip the acetal hold-down plate around, AFAIK it is not symetrical :) It's an old product, before my time so please down get too angry if that's not the case :)

The cooling engine is exactly the same (EK-FC Titan vs. EK-FC Titan SE). :cheer2:

Hey Mike, long time no chat. Any new progress? :)