Search:

How about S3 rev 1.0?

Should work just fine with 8400/8500 right?

Im looking for a new board to replace my current Gigabyte 965 S3.

I have found a P5K Pro for a pretty nice price, seems to be quite well clocking to, it does around 540 fsb.

Is there any...

I downloaded Memset to get a better view of my timings, cpu-z doesnt tell me very much really. It looks like this;

http://hem.bredband.net/badboll/timings3.jpg

I dont know anything about...

As topic, what is the best bios version for OCing? :)

Currently im using F8 but it doesnt work really, sometimes i can boot at around 485 fsb and when i reboot it later it wont post. A bit...

Sry for bumping this old thread up again, but i just need to ask..:)

Is it safe to run +0.2 or maby even +0.3 on NB without any other cooling than the stock heatsink or does it get to hot?

I...

How high did you guys get with your S3's?

Think it will do more than 400 fsb?

Is 2.4V max mem voltage? Need some more :P Got the F8 bios right now, more voltage in newer bios maby?.. (Didn't...

I dont know what's wrong but i cant get i working with my memorys at speeds over 1000 mhz.
It is 2 1 gb sticks..
I have tried the Option 2 in bios but no difference to Option1.

Doesnt the...

Oh i see.. Hm i hope my mems go a bit higher if i push them with higher voltage and change some timings but i dont think so.

Thanks for your reply :)

Anyone that got the same board that could tell me what options there is avaliable in BIOS?

I have bought a Gigabyte S3 board and i should recieve it in a couple of days, but i was just thinking about what kind of memory dividers there are avaliable in BIOS.

My rams can only go up to...

I tried earlier today and the highest i managed to run was around 340, so i guess your right. :(

I need to find some other board that can handle 400+. :)

Thanks for your reply!

No one knows?

Really need to know if it's worth to buy som better memory or not. :)

Just wanted to know the FSB limit on this card, i know it is almost impossible to tell from card to card but i got absolutely no idea right now. :p:

Up to arounds 340 seems to work just fine,...

I dont need any supercard that can handle 400+ fsb or so, just a decent board.

It has adjustable vcore up to 1,7V so that should be more than enough, im going to run a P4 550 on it to begin with....

1.4 and 1.5 done.

Seems to be stable at around 720/1600 with 1.5 but it's artifacting in ATitool anyway, but it goes perfectly through 3dmark05,01 and 06.

Now i only got 1.55V left to try, but...

Just did the 1.4V on my 7900GS :)

Before mod: 570/1550
After mod: 690/1570

I got a Zalman7000 cu on it so the temps are low, never go above 50 degrees on fulload. Is 1.5 or 1.55V safe then? ...

I doubt it will go over 50 at fulload, so it should be ok. :)

Yes, it should be pretty safe with this cooling, right?

Just finished my little mod, it turned out just fine :)

The temps went down alot, from about 40 idle to 32-33. Dont know about load yet but it was around 55-60 before and now it's around 40-45. ...

Come on, anyone gotta know? :)

I once had a 7800GT, i quickly throwed the original-cooling away. To noisy and it didnt cool as good as it should. ;)

Anyway, it was great and it was almost completely silent. :)

Does it fit...

Amazing cpu :)

Nice work!

Nice work :)

Can i get some nice memorys for ~$200?
Im thinking about 1x 1024 to start with. :)

That's crazy :)

Keep on! Soon 9.xxx! :D