Search:

Should be self-explanatory that - just use the 8 pin.

With a 5960X overclocked with over 1.25Vcore and fully loaded, it's a good idea to use both the 8 pin and 4 pin.

Check the POST code it hangs on then report back. likely need to tune VCCSA, DRAM voltage and change FAST BOOT settings to store "good" DRAM training to NVRAM.

For those of you looking at memory access times between two points here's a quick sheet showing which will access faster. Just enter Mem Freq and CAS:
...

Latest UEFI Build for R5E:
RAMPAGE V EXTREME UEFI 0801
0801 Download Mirror


Latest UEFI build 1002 for the X99-Deluxe:

X99-Deluxe 1002 UEFI
Mirror

Each header is rated at 1 amp max.

Let me know how you like it. I like 8.1 for my home rigs so may jump over to this.

I haven't tried 10 yet Charles. You like?

Very nice Hiwa.

I usually just enter UEFI and navigate the the BOOT menu>BOOT override and just press enter on the drive I wish to BOOT from.

Nice!

More likely the CPU. We don't always get what we want frequency wise from a CPU in all applications. Looking at the voltages being used that CPU is being hammered with all sorts.

Do you really...

Watercooled 4647MHz CPU and Cache. DDR4-3305 1T 2 hours of Realbench (2X570s)


http://s3.postimg.org/cjuj6hyb7/4647rbpass.jpg

Good result Dumo :)

Okay, good luck.

Check event viewer for error logs when the resets occur.

Set Q-Fan control to disabled on the header the pump is connected to. This will run the pump at full speed. Make sure you are not using the pump with a fan on the CPU and CPU OPT headers (if the pump...

Check temps and make sure the pump is spinning at full speed. That's all the debugging I can help you with from here.

Thanks Charles!

I use a variety of PSUs here: Antec, Corsair & PCP

Try the following:

1) Disable anti-surge in UEFI. See if that affects anything.

2)If number one does not help: Re-seat CPU. Try again. See what the OS shows in event viewer error logs.

No worries, I forwarded to HQ who got in touch with Jack on your side. :)

If its freezing in UEFI it's unstable. Are you loading XMP or configuring DRAM settings yourself? XMP should show 1.35V on auto when it is applied and the system has been reBOOTed.

Do the freezes...

At stock or at OC?

4.6 CPU, 4.6 cache, water-cooled 2hours RB pass:


http://s30.postimg.org/xu44hixzl/4600rbpass.jpg