Hi everyone, here is an update on my build. Pump and reservoir has been installed back into my rig and I’m just leak testing everything. So far, there are no leaks, however, I’m wondering if my pump...
Type: Posts; User: turok_t; Keyword(s):
Hi everyone, here is an update on my build. Pump and reservoir has been installed back into my rig and I’m just leak testing everything. So far, there are no leaks, however, I’m wondering if my pump...
yup i figured it out, thanks!
Hi everyone, I just got a Singularity Computers Protium D5 reservoir and an alphacool VP655 D5 PWM pump. I?m testing them out of my system to make sure that the pump works fine before installing it...
After disassembling my entire system, here are some pictures. I did find some rusting (??maybe this is just the bare copper underneath??) in the radiator threads and on the Bitspower barbs (inside...
Hey everyone, just wanted to seek your advice as I have been out of the watercooling gig for a few years now. I have an older rig that uses the following components:
1. Koolance i380 waterblock...
In terms of RAM what would you guys recommend?
How do the asrock extreme4/6 compare with asus for the z77 chipset? Which is better?
Hey guys I've been out of the computer realm for sometime and need some recommendation on a z77 motherboard. I'm planning to get i5 3750k and looking for a mobo with maximum overclocking ability. Ive...
I was just in the middle of playing Crysis 2 on my computer when my computer automatically shut off all of a sudden. I tried to turn the PSU on/off, reset the CMOS and the computer still doesnt boot....
Im not sure if there is a sticky or an existing thread with all the core i7 overclocks, but I thought I would contribute my results:
Core i7 920 @ 4.0Ghz with 1.30V (Vcore) and 1.250mV (VTT)
...
After a few days of testing, I achieved my finally settings. All voltages have been lowered as much as possible to minimize heat and preserve the longevity of the chip.
Core i7 920 @ 4.0Ghz
CPU...
Thanks for the reassurance kinda knew that real world environments mean the most just wanted to confirm with you experts
In regards to running stress tests for a long time, here is the question I posted on other boards:
"If I run these tests for such a long time, will it damage my CPU? I dont want to over stress the...
So today, I started to test now with Prime 95. When I turned HT on with either 4 threads, or 8 threads, I BSOD right away. Here were some errors I got:
0x0000003B
0x000000101 (usually means...
The reason why i ran 75 runs with max memory was based on a X58 OC guide I found on the EVGA Forum:
"Once you have your vcore in a good spot, run 50 - 75 Tests with ALL memory to be sure your...
Here is my Overclocking journey for my Core i7 920 thus far. My Vdimm is set to 1.6V and my VTT to 1.3V... Here are some results:
3.8Ghz (181x21)
1.35625V (Vcore)
1.30V (VTT)
Stable for...
Hey guys, I have a Core i7 920 (D0 stepping) cooled by a Coolermaster Hyper 212. My mobo is a EVGA X58 (758) using the latest SZ82 BIOS. I was able to run my system stable at 3570Mhz (170x21) with...
Right now, i have two 6950 flashed to 6970. Currently, Im using a core i7 920 @ 3.0Ghz with an EVGA 3x SLI mobo. Do you think my cpu is bottle necking my video cards? Will I see greater performance...
Right now, i have two 6950 flashed to 6970. Currently, Im using a core i7 920 @ 3.0Ghz with an EVGA 3x SLI mobo. Do you think my cpu is bottle necking my video cards? Thanks
I recently purchased a Diamond HD 6950 2GB that uses a nonreference board. I backed up my bios with ATIWINFLASH and loaded it up using RBE. I opened RBE and went to the last tab "Additional Features"...
ok i finally got my "Powercolor Active Mini DisplayPort to Single-Link DVI-D Adaptor". I noticed that it has a female DVI-D and my monitor output also has a female DVI-D.
Do I use a single or...
Okay so Im having some difficulties hooking up my Sharp 30" LCD and two of my Hyundai 19" LCD screens to my Sapphire 6970. This is what I have tried:
1. Sharp 30" <----HDMI cable ---> 6970
2....
Please read my post before replying carefully, and please keep your personal opinions about Crysis 2 or any other game out of this discussion. If you do not like the game, dont play it.
I fixed...
For my 6950 unlocked shaders only to 6970, I realized that for Crysis 2 I see some flickering and flashing if I set my clock speeds to 880/1300 on 1.1-1.17mV. However, if I set the voltage to...
For my 6950 unlocked shaders only to 6970, I realized that for Crysis 2 I see some flickering and flashing if I set my clock speeds to 880/1300 on 1.1-1.17mV. However, if I set the voltage to...
Anyone know where I can get the Thermalright Shaman in Canada? I cant find a single retailer.