Search:

Update:

The unit was missing some R507 for sure, after adding some and tuning it under load the capacity is around 170W @ -30C - just like I built it for 10-15 years ago....
The compressor spec...

Hey !

Got my old ss from the basement, it started fine and dropped to -50C like I remembered.
After noticing that under cpu load the evap temp will sky rocket I started investigating.

Going...

2- none

Thank you

0.64 gal/min ? ok ? too low ?

Hey

I got this flow meter
http://www.sidewindercomputers.com/flsehflg1for.html
"Flow sensor high flow G1/4 for aquaero, aquastream XT ultra and poweradjust"

In AE5 I just choose:
Default...

Hey, just got my water block for the AE5... temps are higher then with my two minifans....

ch1 and ch2 got 3 fans @ 5v (370ma @ 12v) each....

88C
27C room
30C water

New update:

Aquasuite 2012 Beta 5
Firmware 1013

http://www.aquacomputer.de/software.html

13-7-11

I ran 7 370ma fans @ 5v from one channel, only the total A @ 12v was too high to leave it this way.

As I said - connect and check the numbers - cooling is a must

delete

you are limited to 1.65A per channel, and 5A total.
so your enermax @ max rpm is pulling 0.166A(2W / 12V = 0.166A), if temp is no problem you can use 10(!?!) fans @ 12v for each channel,...

Check my post:
http://www.xtremesystems.org/forums/showthread.php?265912-NEW-aquaero-5-series/page25

with the stock sink I could run 2-1-2-1 fans but with active air on it I could run 7 (!) fans...

After I got some cooling on the sink I can run 12 fans np :)

The mini fans are set for 85C target temp.

The total W is 50W~

I tried *7* fans on one channel with np, but the total A was 2.6A...

I see the ma reading on the AE5.
no air flow on the sink, any other fan controller I used did not have any air flow.

After the last test I made I can mount:
ch1:2 fans
ch2:1 fans
ch3:2 fans...

please delete

I lowered the sensitivity to 15, it is still going crazy some times.

Is it normal I can only run *one* 370ma fan on each channel without over heating ?

The LT/PRO come without a sink... so they...

Hey Shoggy,

I just got my xt today, can you please try and help me on a few things ?

- I can not run more then one 370ma fans per channel - the vrm temp will get to 95C.
- The f1 and f2 keys...

http://img718.imageshack.us/img718/412/img1261bf.jpg

http://img96.imageshack.us/img96/1957/img1275ce.jpg

http://img88.imageshack.us/img88/4492/img1278e.jpg
...

10x !

Tube:
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_413_415&products_id=2057
PVC

Some great SLR pix on the way...

I can run the fans @ 5v while...

It's 3/8" (10mm) OD tube and quick connect 3/8" (10mm) fittings

Hey guys,

My HAF932 needed a black paint job, and all my cooling needed an update, so after I ordered the Aquaero 5, I started getting ready for it, I painted and rebuilded the whole system.
...

Hey Shoogy !

I love the product and I have a little Q.

I would like to set a delta water to air as the condition for higher rpm...

Can I do that ?

I should have the air temp and the water...

10x, true :up:

"Rule of "diminishing return" applies." ? can you explain ?

10x ! :)

jmn2519 - you can use any voltage regulator (like a fan controller) that can handle more power (W) then the pump in order to control the pump voltage (speed).

This is the data I collected up to...

res,pump-->rad-->cpu->gfx-->gfx-->res

Thanks Skinnee :)