Search:

LivingL@rGe81, there's no way to reprogram SPD of Samsung DRAM modules since they come with enabled Reversible Write Protection for the first 128 bytes of SPD. Hynix, Micron and Nanya/Elixir protect...

NEOAethyr,

:rofl: OMG! He killed the memory controller by the software! RTFM what is the memory controller of the AMD64 processor first.
According to your words, CPU-Z, HWMonitor, AIDA64, SIV,...

Man, I can share a secret around Thaiphoon Burner: it does not communicate with memory controller of the processor. It accesses SMBus/I2C devices via the SMBus controller which is in the south bridge...

My Dr.Web 6.0 ant-virus software detects a virus in the setup file.

http://img818.imageshack.us/img818/706/virusdk.png

Uploaded with ImageShack.us

Sorry, I would not like to discuss my software at XS.

Oh, I am sorry, I forgot to say that in Unganged mode each DCT has its on set of memory timings too. For instance, DCT0 operates at 6-6-6-18... and DCT1 operates at 6-6-7-22... So, I don't see on...

This version works fine.

a) I would not trust cpu-z too much since its GUI design conception is too old in respect to the new generation AMD processors. For instance, it does not show you a clock frequency of CPU cores that...

LOL! Dude, a clock frequency of 1066MHz is not achievable on AMD platform. Even the latest AMD "Llano" Family 12h processors do not allow DCT to operate at higher than 933MHz.
...

No, I don't have such a tool. However, you can try DCT Tuner from Thaiphoon Burner software to increase memory bandwidth of your netbook. DCT Tuner is capable of adjusting the main DCT timings of the...

I have created the largest SPD firmware database for Micron Technology DIMM modules! Probably, it is the only publicly available SPD database. For the moment, Micron restricts access to 691 SPD...

Fatfool,
Yes, in most cases CPU-Z does not show the correct SPD frequencies for DDR3 SDRAM modules. Besides, it does not show a clock frequency for each supported CAS# Latency. For example,...

I have got Kingmax KLED48F-B8MN6 DDR2-1066 with D9LPK chips. The chips were manufactured by Micron's Taiwanese factory. JEDEC memory timings are 6-6-6-24, EPP profile is 556MHz at 6-6-6-18 2.0V.

Man, no any version of CPU-Z is capable of determining the right frequencies of 533MHz, 667MHz, 800MHz and so on for DDR3 SDRAM modules. Instead of that, it shows something unbelievable. Check your...

Hello!

Guys, could you please help me to get the BEMP profile for Corsair CMD8GX3M4A1333C7 8GB DDR3 RAM (4x2GB)? Corsair claims that this RAM is BEMP-compliant, but AMD OverDrive utility can't...

B0 is a pre-production revision of Ontario processors. Llano code-named processors are not ready so far.

Native Specialist has been updated to version 1.8 build 1003. The latest release brings support for the next generation AMD processors related to 40nm Family 12h and Family 14h. Native Specialist is...

I've got something exclusive

http://cbid.softnology.biz/work/softnology_eOntario_1new.png

and

http://cbid.softnology.biz/work/softnology_eOntario_2new.png

Enjoy! :)

Everest is buggy without optimizations.

Here is the Everest snapshot for memory bandwidth for Ontario APU 1.6GHz with a single channel 64-bit DRAM controller running at 533MHz

http://softnology.biz/work/softnology_eOntario_1.6GHz.png

Panther_Seraphi, it is related to the X6 without the core performance boost feature. Probably, it's a BE series.

Here is what I found in the latest thermal document and supported in Native Specialist 1.8

AMD Phenom X6 125W PH-E0 Series:
Z970 2600MHz - not Thuban
T55T 2800MHz
T75T 3000MHz -...

Native Specialist has been updated to version 1.8.0908.

It looks like DDR3 LRDIMM with a registering clock driver chip produced by Inphi.

I have just drawn a block diagram of AMD FT1 mobile platform. Check it out!

http://softnology.biz/work/AMD-Fusion-NDA.png