I've seen a lot of Barton/XP with 64K L2 due to overvolting & subzero temps, check with the old owner if he has a vapo style unit and then you will get your answer ;)
Type: Posts; User: xigfrid; Keyword(s):
I've seen a lot of Barton/XP with 64K L2 due to overvolting & subzero temps, check with the old owner if he has a vapo style unit and then you will get your answer ;)
Nice job again sjohnson !
Why all theses tricks come after the enthousisame for NF7-S ?
Bad Dog 'ABIT' ! Bad Dog ! No More money ! No More Credits ! :mad: => Going to DFI soon
hehe commando, get some French lessons et be at the edge of the o/cing : as everyone knows, French is being DA ultimate universal speeking for o/cing ;)
Ps: Im joking hey ! but anyway My 2nd...
erm , sorry to hear that BMORIN. Seems that your board has something with the bios writing.
Try to get a friend's NF7 to hot flash again these board had become very popular nowadays.
OMG, was wondering about a new mobo to replace my P4C setup ...
guess i ll give a try to the DFI sweeties : humm wonder where i ll find a valuable Barton now xD
Anyway Lost Viking...
Have you any clue about making the Vcore fluctuation fix mod ?
I have located the ADP3180 quiet easyly ( under the chip retention system, on the left side ) and it is not at the same place as onto...
I aggree with ya, be his memory reincarnate in me ;)
just forgot to add : my brand new NF7-s from rma has a
C1 southbridge !! which don't heat as much as the A3 southbridges
but so far only 240Mhz stable, and only with d10 bios :(
humm, wait 1 week or 2 , there will be the AMD64 DTR 3000+ at 250€ (same as the std 3200+ BUT without the IHS and lower stock speed)
You can also try the moded bios d10 by Mickey Padge : bios d10 with Sata raid bios from the d14
Btw, as all know don't even think of flashing this beta bios without a bios savior/ 2nd bios chip
Hum, i would like to get one of those PCI card to get a SUPA-ram drive mounted into cheapo PC2700 or 3200 for my windows and benchs setup :)
dont pay the spare bios chip, ABIT send you one if you send them an email ;)
The differences is
NF7-s has the serial ata controler SIl3112A + adapt PATA to SATA serillel2 (which cost 20€)
NF7 has no sata habilities
NF7-SL has the sata controler but no adapt PATA to...
THe great 1700+ overclockers can do 1.2v @ 1.8Ghz on passive SLK800 prime stable : hell hot but stable (note that you will need the 2nd fan of the psu to get it as high)
I would recommand you a...
in P4's mobos, there is no limitation of hardware except the ram quality, but AMD's setups this is another story :rolleyes: (edit : northbridge, southbridge, cpu, etc ... )
Unfortunatly for ya, there is what i call the "new" revision2 coming for 1 or 2 weeks on the market :
they have :
-newer C1 northbridge with Ultra written on them : they can do 240Mhz with only...
thx mate, but Mad Overclocker was a good guide thu :)
btw , it will be posted for the others like me ;)
go for it , no pb at all: but one word : don't expect to o/c with it ;)
Just got a new motherboard ... 7th in 2 months, well i know , i'm a NF7 killer :D.
This last one is so far tested at 240Mhz (Nrth week 20) going higher later with better PSU
1st point , doing 220...
got nothing better with that mod upper than 2.3V, not more stable either, i heard of better results of the Vcore mod on rev1.2 (up to 2.4V before overcurrent protection cut off the CPU)
hehe , nice mod saaya, i would try it out if I was keeping on NF7-s:
My last NF7-s burnt because of my ANTEC 430W which died suddenly and fried the HIP6301CB (dunno why, but something to do with...
I ve seen some L2 cache craching from high vcore and low temps. No probleme yet with my barton @ 2.3V cross fingers ;)
buy a little MCX159-R, torn the little pins , then you will get a innovative MCX159-R-V that will accept a 60mm fan :D
(if possible to torn ;))
xigfrid
let me think : I've just reformat yesterday, all drivers has been installed correctly ... prolly something i didn't get up to now... btw thanx for the help.
I won't know whats the matter, keeping...
Oh well ... here is my 11x232 (2550Mhz) :mad:
http://arc.aquamark3.com/arc/arc_view.php?runID=680155490
cpu:4800
GFX:2502
total bad4ss : 19855
compared to my 12.5x209 (2610Mhz)...