Search:

What I wrote above is confirmed correct by another Electrical Engineer I know and I made this for people to see it all together:

131866

Red = Pin 1 Location
Green = TO-99 Key Orientation

...

Well if anyone else reads this in hopes of finding info here is the little bit of info I have gathered:

The circle or indention on the Op-Amp goes towards the half moon (or cut out) end of the...

Ok, so far I have purchased the parts pictured below:

131858

2x OPA627SM
1x MUSES01
2x OP99 to DIP8 Adapter

My main question is about the orientation of the OPA627SM in the adapter listed...

Ok this has me confused, why will multiple onboard sound cards and the older X-Fi chip (newest revision) decode 24 bit in PowerDVD 13, but I have to use AnyDVD HD with the ZXR in order to get 24 bit...

yea I ended up getting the ZXR, really nothing else competes with it on a PCI-E interface.

Are all DACs only 2 channel? Seems they are all aimed at headphones.. Looks like I may be going going with the ZXR.

So I went to SLI GTX 660 TI due to a really good deal I found on the 2nd 660 Ti. Well my Prelude is a PCI sound card and there is no room for it anywhere with SLI so I need to get either a new sound...

Can someone with a X-Fi card check if they have a file called APIOM64/32.dll in C:\Windows\System32 or C:\Windows\SysWOW64 for reference? That way I will know if I am actually missing the file or if...

So I was trying the new PAX Drivers that were released a short time ago over on Hardware Heaven. Either when I was trying to remove the existing PAX driver or when I was trying to install the new...

as long as it does the flash with no errors, I would assume so. However why not type out a few more letters just be sure it is going to flash without any issues?

http://forums.guru3d.com/showpost.php?p=3433513&postcount=1



this is the "longest" way to flash, you are telling it GPU ID #1 and then using all the overrides:



From reading that thread...

Crazy, perhaps you should post what I put back on Pg 13 in your OP so people will have less trouble using the tool.

Here it is again for anyone that is having trouble getting this to work:

CrazyNutz it looks like you will have an opportunity to unlock the beast (Titan):



http://www.anandtech.com/show/6774/nvidias-geforce-gtx-titan-part-2-titans-performance-unveiled/2



The...

No problem, you deserve credit and it fit in perfectly with what I was writing in our article about Titan's new Power Target/Temperature Target setup to calculate boost. Hopefully it will bring in...

Here is Titan: http://videocardz.com/39721/nvidia-geforce-gtx-titan-released

CrazyNutz I gave you a "shout out" in our article: http://videocardz.com/39677/nvidia-geforce-gtx-titan-announcement-leaked

bentez what you are describing makes perfect sense when you read the Whitepaper on Kepler about Boost:



It sounds like you are exceeding the 150% power target.

At 1359mhz that is not...

Tripp17, in GPU-Z at the bottom you can select each GPU separately can't you?

I remember when I had a GTX 295 it would show two 295's and it was each GPU being displayed separately.

All I know is the max boost clock is the set ceiling of the card. The absolute max frequency allowed.

You have to use software OCing apps in general to control Power Target, Voltage, Clocks, etc....

It is exactly how it sounds, that is the maximum boost clock the card will reach

You don't "automatically" reach anything, you have to see what is stable and turning up the max boost clock only...

Well I am stable at 1242mhz boost, which is pretty close to my goal of 1280!

edit: got it

ah, finally!

Thank you!

following Veteran's guide, is C:\Users\My mean C:\Users\Name (root)?

My is a bad choice of words due My being used in folders like My Docs, My Pics, My Music, etc.


still none of this gets me...

did you find a way to make NVFlash work with Windows 7? That is the reason most people make a bootable device.