Search:

Here is the best I have so far.(with nature :D)

Yeah.I Have only one :)

Somebody wants to know quad:4ghz and 900core on 4850 so this is the answer
vgpu:1.48
vddr:2.05
http://img103.imageshack.us/img103/3865/06markmaxwd2.jpg

Can anyone try this drivers on Dfi rd600?And When will release hacked drivers for 8800xxx series..?

another vote for cellshock:D

Before the change dimm parameters click the refresh button thats all:D

1.9v or 1.96v I can't remember that was the first try..:) .Nb cooled by wb temps 38-42 via SG.

Did you try single hdd on promise controller?it works or not ?:confused:

Dfi rd600 good mobo but some problems..

Firstly on sb600 4*250gb 7200.10 series seagate hdds are raid0 on my set up.My backup single Hdd didn^t work on promisie chip.İf ı plug the backup...

First try with rd600 .518fsb easily but no more..Set fsb with setfsb:D above 518fsb (522 or more) still 518 fsb via cpuz.İs that a bios limit or bug?:)
...

yes.İf you change the stripe size you must be formated all the raid hdds..ı think for the best performance 16k

Mobo:Gigabyte DQ6(ich8r)
Ram : 2/*1gb gskill 6400Hz
Hdd :4* 250gb seagate 620As

128k
http://img404.imageshack.us/img404/1677/128kwh7.jpg

16k...

congrants excellent! :woot: e6600 world record maybe the p5b limiting?:D :slobber:

follow this page for gigabyte bioses..
http://www.jzelectronic.de/jz2/index.php

L628Axxx

Fix the vcore problem!! with new E6600 1.55v on bios it semms 1.50v in everest Dq6 good board..:D

[img]http://img70.imageshack.us/img70/2307/15vlargejy9.jpg[img]

İt seems 1.6v or more vcore problem is only for me..İn bios or easytune 1.6 and 1.62v pc shutdown and after 5seconds reboot,1.65v and 1.7v freeze.whats the problem on my dq6?Any of you hava a similar...

Anyone try 1.6v or more vcore on Ds4 or dq6 bios or easytune??Bsods on mine:slapass:

Already try all of them but haven't got any improvement.sorry for fisrt ss I didnt see it:eek:
Another issue I didn^t give 1.6vcore in bios via easytune.f3 final f3g f4A same..

My 6400Hz easily goes to 1050 4-4-3-x @just only 2.2v..I think it's not ram issue..your cpu is step 5 b1 and this is the key issue..I see a lot of retail 6600[step6 b2) all of them as same es with...

Dq6 f3 final bios.
E6300 step6 r2>485fsb all stock easily
e6600 step6 r2 only 360fsb??:slapass:
Dq6 very bad mobo for 6600.Anyone pushes over 360+fsb with e6600 on DQ6??

Just ordered 606xxxx chips are micron D9GMH.Waiting for 6600 ana DQ6:banana:

Venus different from slidr&ultraD so what's the optimal strength settings for this Ocz sticks.3/6 1/8 or what?Another 2 sets of these sticks will be in my hands soon..:)

510-2 Hellfire:thumbsup:

İf you asked me ı try 2.5-2.6-2.7-2.8 ı haven't got expert so only try these and +0.03 settings to applly them...Today I rmaed all the sticks to local retailer..

it's on water water temp 15-20c in bios ı think 1.48 but not:D sure