Search:

I'm sitting here with some Kingston HyperX PC 3200ULK2/1G, and then I find this at the ram list:



So I wonder, are my ram TCCD? or could it be some other chips? - I do not have a possibility to...

Hmm I've done Vgpu, Vdd and Vddq mods, and I ended up at 600mhz GPU Clock, with 1.6Vgpu, but when I turned on my computer the next day, Vgpu was at 1.55V instead of the 1.6V I left it at, the night...

well I had a asus 6600 bios on mine, and it gave a little in mem performance because of the tighter mem timings...

No, it's not because of heat :D

http://www.try-this.dk/6200/11.jpg (check my cooling, the heatsinks wasn't hot, no matter how hard I pushed them)

That was my experience too :(

When I searched for WRs I looked at what people had their gfx clock at and most of the mem clock on real 6600s were way higher then possible on a 6200, and somehow I always ran into your score as the...

Hi Andy

So it's the right WRs i've found?

Is it bad that it's identified as a 6600? (Your 6200 are as well) ;)

The card just scores better with the 6600 bios, and as far as I can see, no one...

Hi, since I got an opteron to support my oc-rig, I'v been trying to got some WR's with my Asus N6200GE, and I think I'v got the 3dmark01 record, here's the setup:

Opteron 146 @ 291*10=2910mhz -...

Looks nice, heres is your next step:

http://www.try-this.dk/6200/11.jpg

(That is my Asus N6200GE, with Vgpu and Vmem mods)

Ok, well if you hear anything -> please post :)

Ok, I ran into some troubles with my setup: Celeron D 325J and Abit AS8. I'm doing some DICE experiments to see how high I can get the celly runnin', but I seem to run into an OVP at 1,75Vcore, when...

wow! He actually did 200% :woot:

If I were to bild a rig for high %-oc, I would go for the Celeron M.

Ok, that sounds good - I'm hoping to get it stable at 2800mhz+ on air cooling, and bench @ 3ghz with some nice cold air from outside :D

Nice overclock da-key :)

Anyone know if the CAB2E are good clockers in general? couldn't find much @ google...

But seeing other 0546 CAB2E doing fine, convinced me to order a 146 CAB2E 0546...

Sometimes it detects the wrong values, is it the same in 3dmark 01 and 05?

Impressive stuff Crotale, time to update your signature ;)

The author wants to see 100% OC, and since video cards can be overclocked I would think that it apply to those too ;)

I have an Asus N6200GE PCI-E Vgpu & Vmem modded, does 600+ mhz on the core...

Yep, and I don't think I can beat that... next time I go DI, I'm hoping to get my 325J @ 5.3Ghz (109%), which means I'll still be way behind your 119% ;)

Dry Ice + Celly 325J = 5074mhz

Hi

I've been inspired by the impressive results achieved in this thread. Therefor I've bought an Asus N6200GE 128mb PCI-E. I applied the volt mods and some extra cooling, my maximum clocks are...

Thx Hipro, Just did the Vdroop mod, and that just helped A LOT, so thank you Hipro, this will help my Celeron D 325J get even higher then the 5Ghz I managede last time I tried Dryice :D

I'm...

Should be unlocked since is AQZFA 0336MPMW ;)

nice chip you got, I haven't testet mine (just got it by mail today) ;)

of course, I'll post all the information needed ;)

Thanks, and good...

He he I like socket A too, planning a dry ice project for my DFI LP NF2 with a 2500+ ;)

That should cool it down way better that my 3312 ;)

MAX 50ºC @ load at 3.8 with 1,55vcore I'd say ;)