Search:

why would he?? D-tape in not conductive ;) I use everything from dieletric grease to Chemtronics Acrylic Konform AR and silicone SR Konform to sheets of neoprene to liquid tape :) not as extreme as...

does the motherboard support SATA??

tom is that 2 prommys on the VC??? reg r404/r507 or cascade with prommy heads??

also have you tried the 1002.20 bios? try 2-2-2-5-7-16 and the blue slots and 3.41v that should get you full max...

Now lets not get things mixed up here Im sure 939 1meg "FX55" will surpass FX51/FX3 on a base level by maybe 1% due to non-registered ram, my question is 939 512k or the new A64 line on the 939...

thanks tom yeah Im RMA'ing the board tommorow and selling the fx51 and getting an fx53. The fx51 I have is awsome on air and when its running right subzero as you've seen, but I cant take it that Im...

na no condensation at all :(

LOL I did thats what I said I go from

1.74v@10.5x250 on air only remove the HS and add the block and can't get the same exact clocks.

Trust me if you can think it I have done it to my knowledge...

thanks SAI I like the 31s at 2600mhz myself ;)
http://jason57.iwarp.com/fx51benching/wrspi31.JPG

it was flaky the first time but it finally started to go ok, but even then it was off :(

and yeah the cpu is showing -35c in the bios and the back of the mobo is soild ice.. again no condensation...

Day 1 was awsome, but today after running 2625mhz at 250mhz+ 1:1 on air I switched to my ethanol cooling and even though I could run 3ghz 15x200 anything on the fsb casued BSOD

Its like the...

http://jason57.iwarp.com/fx51benching/28s.JPG

DAMM Im so close to 44s on air, but over 251 I get a lower score I think my ram is dropping timings over 251mhz fsb with 10.5x multi :(

http://jason57.iwarp.com/fx51benching/251pifast.JPG

site link
http://netti.nic.fi/~hege/PiFast43/PiFast43.html

app link
http://netti.nic.fi/~hege/PiFast43/PiFast43-4Mi+8Mi+16Mi+32Mi.zip

heres my first go :)...

Day 1 was awsome, but today after running 2625mhz at 250mhz+ 1:1 on air I switched to my ethanol cooling and even though I could run 3ghz 15x200 anything on the fsb casued BSOD :(

Its like the...

http://www.cpuid.com/cpuz.php#download

Finaly made it to 256mhz 1:1 fella's scored an unreal 48.13s in pifast 2.41 at 256x9.5=2433mhz so this new board + ram is better than the first by far :)

I need to get some good 256x12=3080mhz...

thanks all, quad yeah new goal is 260mhz, but Im going to need to tweak some more alot more I think..

I did that yesterday in this thread
...

world record air cooled score maybe
http://jason57.iwarp.com/fx51benching/wrairpi.JPG

at only 3.24v vdimm thanks to OPP ;)

Unbuffered
http://jason57.iwarp.com/fx51benching/buff250.JPG
buffered
http://jason57.iwarp.com/fx51benching/25011mem.JPG
superpi 1m...

what is it with you and unbuffered LMFAO
who cares if a P4 is better here it gets left anywhere else

but since you asked nicly

http://jason57.iwarp.com/fx51benching/buff250.JPG

mcw50-t works on all including the 9800xt's :)

king awsome clocks for both you guys but you need fx51. being able to run 3ghz at 1.725v leaves your mosfets cold the board able to run huge loads 24/7 and so on.
...

no or I would have one :)

2.03-2.07v should max out the card with a -20 to -40c evap I bet you'll hit a wall at exactly 567mhz if you can keep the heat down thats just a spot where the core maxes out..

GL

tom ya get your fx53 yet M8?? i want to see some 3300mhz clock from ya :)