Search:

Did you solder it all together or was the board pre-built? What version of the DDC pump are you using this with? If you can provide large detailed images of the pcb board I can look over it and see...

Yes I will still do the video showing the external PCB setup. I am actually quite interested in this method as I want to see how much of the temperature is due to the controller and how much to the...

Very nice. I was going to make the same video except for soldering the whole board, but at this point I don't think I need to. Great video showing how to solder the hardest component on the board.

Do you have any idea how these are made? You can not change the internal o-ring without cutting / removing the brass tube and having to make a new one of these. I doubt it is a damaged o-ring. One...

So I purchased a 180 degree connector so I could connect 2 radiators together that are right next to one another. I know it wasn't designed for this, but should work just the same since the same...

There is a new revision of the upgrade board. It is now white and has built in LED's.

Looks pretty good with a clear top. I think this would look very nice with a clear res top so that the light...

Yes you can use car antifreeze to eliminate galvanization. Once you are done with that setup I would suggest flushing the blocks, pump and everything else in the loop before moving onto the new...

So after spending quite some time yesterday looking what what I currently have done I cam up with an even better revised box. This box ends up utilizing 2 of these fans in series which not only...

I don't think DIYINHK will ever sell these already attached to the DDC3.2 or 3.25 pumps since their purpose of the pump was to bring dead pumps back to life.

I think I will make the video since it...

So I just got confirmation about them having a pre-soldered board available soon for those who can't or don't want to do the smt soldering.

For those who are interested in doing the smt soldering...

I have created a temp test box already for this system to see how well this will work. If all goes well the final version will be a cnc cut anodized steel/aluminum box to match my case so it will...

So after far too long I can't stand the noise/heat of air cooling anymore so it is time to go back to water. The reason I quit water cooling in the first place was because I couldn't stop and kept...

Yes these are the revised PCB boards which now have LED's and possibly another revision (will know in a few days). The actual controller has PWM abilities, but they are not activated in this revision...

The new revised boards are available now. They just aren't available are pre-soldered versions (yet). http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330579999664



#268 is one of my posts....

Guys I have a few on the way and I put in my feedback of people asking completed boards. I am sure though since they were offered before they will be offered again. As for features I will post a full...

No worries I have thick skin. Go check out my other thread I made about the differences of the DDC pumps. Lots of good information there.

This is a video explaining the difference between the DDC1, DDC2, DDC3.1 DDC3.2, and MCP35X pump is. I hope to get my hands on a stock DDC2 pump along with a DDC3.25 pump so that every DDC pump is...

It is true the DIYINHK pumps are louder, but just as they should be since essentially the same pump when modded has a lot more flowrate and pressure even at lower voltages than 12v. In my video it...

I put "DIY" coolant into all of my cars worth hundreds of thousands. It is DIY since I have to mix antifreeze with distilled water myself. All my cars are happy. :shrug:

I don't know if it will be separate or on board, but I can see good reason for wanting it separately. If it is a standalone controller you then have the ability to control anything with it. Any pump...

Honestly it isn't that loud, but it is louder which should be expected. The camera is close and a sensitive mic. Plus most of the noise you hear is due to how much pressure/flow it has I end up...

Guys I just got a PM from Elganja who used to own the pump that I got for this how to. As I already mentioned he used Primochill Ice for his liquid and based on what I saw on the pump I urged him to...

I keep in contact with DIYINHK regarding this board and future products since I am interested as well. I have made suggestions and I know a new revision of the board will be out in about 2 weeks. My...

All nickel EK blocks.

I don't know the PrimoChill Liquid Utopia, but if it is anything like the PrimoChill Ice I would avoid it. One of the pumps I repaired the owner was PrimoChill Ice and it left hardened residue all...