Rules state at least 20 runs, and the pic has to be taken while the 21st run is in process.
Type: Posts; User: Telo; Keyword(s):
Rules state at least 20 runs, and the pic has to be taken while the 21st run is in process.
I believe they will pop some BS about why you didn't have a cooling device installed on your CPU; even though the obvious reason was that it was turned off and you were prep'ing your LN2 pot for use.
Few questions...
Will the 2500k/2600k family limit these cards to sub-par performance?
Do these cards max out the bandwidth of PCIe 2.1?
Does anyone know when the 6GB models will start...
Yet another submission; this time with a 2500K
http://img703.imageshack.us/img703/5456/2500k5ghz.jpg
CPU: i7 2500K / L143B578 / 1.43v
MoBo: ASUS Maximus IV Extreme-Z
Cooling: Corsair H70 /...
It didn't stay like that, I ran it up that high to see if it would help; it didn't.
I guess I have the model number wrong. Mine is the 8-8-7-24-2T DDR3-2000 set. I can run it 1998Mhz [107 Bclck] with the reg specs on the M4E-Z; with this board, 1600 has been my max so far. I...
Well, I returned one, I still have another M4E-Z :D
I'm beginning to think the same myself. At least I can say this made me return the 2600k and get a 2500k which is a good thing, now I can get...
Man, this thing does not like the RAM I'm using while tweaking the CPU [Mushkin 998750]; it barely makes it to 1600. Meanwhile it did wonderful on the M4E-Z.... it's going to be a long week.
Have you tried under clocking the CPU?
SystemViper has one of the best X48 boards up for sale. Shoot him an email.
I sent back the same exact set of RAM months ago. Good luck getting that set back in any way, shape or form. What I got, after talking to them of course, was a set of el-cheapo' CMP4GX3M2C1600C7...
I thought someone at the Corsair forum already had done this, but with the single 120mm radiator model.
Regarding the CPU temps, try re-seating the block/pump. Also, how is the temp inside your case?
I have two of the above mentioned drives. One has firmware 1.3.3, but the newer one [bought couple of days later] has 1.3.2. Should I even bother even upgrading the firmware? Is there a link I...
Went with the V-Pro version since it has HDMI out [no need for GPU while tweaking it]; and it had the power/reset buttons. Another reason was that I got a 2500K and said motherboard for about the...
I already have the M4E-Z, but I'm interested on the possibilities of HD7970 and PCIe 3.0, which said motherboard does not have. So my question is this, will the P8Z68 DELUXE/GEN3 be as good an...
I already have the M4E-Z, but I'm interested on the possibilities of HD7970 and PCIe 3.0, which said motherboard does not have. So my question is this, will the P8Z68 DELUXE/GEN3 be as good an...
My 2 cents...
People seem to forget the main thing about the post... it is not for you, it is for him. You can be a fanboy of a platform all you want, that is your choice; he is obviously not...
So roughly 650 to 750 pounds... I would say, since you want to eventually hit Ivy, get yourself a 2500k and a good Z68 motherboard.
I said 2500k because it relatively cheap compared to the 2600k...
I'm amazed you got your RAM to actually run at the advertised speeds since it needs 4266 uncore to achieve that. Anything close to 4000 uncore on my i7 950 means a sure BSOD.
As for the...
Oh my... forget HD 6990 for my next build, I'm getting two of these :D
It appears I was using the wrong LinX shortcut...
http://img820.imageshack.us/img820/7770/redone5ghz2.jpg
CPU: i7 2600K Batch# 3135B460 @ 5000Mhz on 1.44v [BIOS]
MB: ASUS Maximus IV Extreme-Z...
My bad... I took the OLD 4.5Ghz club files from my downloads. The new ones are jacking the GFlops over 113.
I updated to SP1 earlier today, and I already had the LinX from the 4.5 - 5Ghz club and the GFlops hardly went up.
Here it is with SP1 installed, and Linx still running while the shot was taken:
http://img215.imageshack.us/img215/3296/redone5ghz.jpg
CPU: i7 2600K Batch# 3135B460 @ 5000Mhz on 1.415v [BIOS]...