So currently I run two NASs:
NAS1:
24x HGST HUS724040ALS640 SAS HDDs
FreeNAS 11.1-U2
NAS2:
Windows 7 w/ Drive Bender
20x WD HDDs (various types and capacities between 1TB and 3TB, mostly...
Type: Posts; User: DangerIsGo; Keyword(s):
So currently I run two NASs:
NAS1:
24x HGST HUS724040ALS640 SAS HDDs
FreeNAS 11.1-U2
NAS2:
Windows 7 w/ Drive Bender
20x WD HDDs (various types and capacities between 1TB and 3TB, mostly...
I'm posting this here since I thought it would be the best place for it.
I bought 2x 7 drawer organizers from Walmart about a year ago. I have since been forced to remove the casters due to the...
+2 :)
Are they referring to all 35X series (35X, 355, 350) or just the 35X model? Just gives them an excuse to sell some special 'pump cleaner' liquid since people now can't open it without...
Yeah, as untamed posted, those air compressors are friggen awesome. When I need to blow out my PCs, Ill open the side and just let er rip :) 2 minutes later, all clean! :D Works just as well for a...
I ran distilled + PT nuke with Tygon R-3603 for ~2 years now and had to bleed, clean out, replace tubing, all that good stuff around 3 times because of crap in the water and cloudy tubing. I'm not...
At $4 a foot, I don't think many would venture to try but a select few, though I do wonder how it is with clouding as well.
+1:)
Thanks waterlogged. What about Feser tubing? Is that OK?
It seems no matter what i use..distilled water, distilled water + PT Nuke, distilled water + penstosin, distilled water + hydrix...I still manage to get stained tubing. Could it be any of the...
Yeah, its about that color...its all over my tubes, blocks and barbs. I ran distilled water + PT Nuke.
So here is the crap thats on my tubing and blocks, anyone know if its algae or flux or plasticizer leech?
http://img341.imageshack.us/img341/5052/dsc1769l.jpg...
Ewwww :P
Unless I'm mistaken, it is my understanding that you would never, ever run tap water through your loop. I'm running into my tubing staining right now, so I am switching over to air cooling for the...
Absolutely. I put in the washers, and it now makes good contact.
So my friend suggested to use washers and place them in between the bracket and the acetel. I used one washer (of 4 I found) on each hex screw between bracket and the acetel and it works great. I...
So here are some pics:
The spare brackets I have for the MCW60
http://img31.imageshack.us/img31/4126/dsc1661u.jpg
You can see the posts and the holes line up...
I just got a 5870 (from a free RMA upgrade from a 4870x2 by Power Color )
Unfortunately, when I took off the heatsink, cleaned off the stock thermal compound, and tried to fit the block, there is...
I have FiOS with the motorola HD QIP 7100 STB if that helps at all. Where would I go about finding one of the cable card with tuner cards?
I'm wanting to record from my STB (HDMI or Component, pref HDMI) digitally(HD) to my HTPC. It would be awesome if a card existed that would take in an HDMI signal, and I could use that in WMC which...
I just got the microfusion 350 HTPC case from Antec, and had a few parts laying around so I have decided to WC my chip. I have a small pump and 2x80mm radiator. I tried putting the pump on the...
Currently, Im looking at this mb
http://www.newegg.com/Product/Product.aspx?Item=N82E16813153126
and this case:
http://www.logicsupply.com/products/venus_668b
due to their size to fit 6 2TB...
I found out the amperage on my alternator, its 90A.
Ive been hearing mixed stories about this. My amp has 87w RMS while my polk MM6501 components have 125w RMS. Will that do? I remember...
Thought it was 100, anyways, the official test spec sheet shows 87w x4 for 4ohm speakers. I heard they like to under rate the power of their amps.
Anyway that got me thinking, I have a 2 pairs of...
Its 100w x4 RMS. But anyways, yeah, I know 80A is too much, but thats what the specifications in the manual require. I don't wanna go blowing out 60A fuses every other week (not that I play my...
Also, is there anyway to find out exactly how many amps my alternator outputs?